Sweet! Two of my interests, snowboarding and aviation in the same video! This is an excellent example of a thorough candid review.
@ColbyOsborn
2 жыл бұрын
Thanks! Why didn't we pick cheaper interests!? 🙃
@saabpoppa
4 ай бұрын
Thank you for confirming my enduring interest in an all-metal airplane! Just gonna have to wait for the RV-15...
@davefreeman6105
2 жыл бұрын
Thank you for the thorough videos on the Oratex process and your transparency.
@cramersclassics
Жыл бұрын
Well done. I'm going to try Oratex on my Kitfox 4 rudder re-cover. Saving 12 steps and eliminating all the fumes and MEK sounds great vs the old Stits system.
@MrToddsCorner
2 жыл бұрын
Thanks for the great videos. I'm a little less edgy about installing Oratex when I get my Badland F5 Fujit ultralight.
@ColbyOsborn
2 жыл бұрын
I bet that will be a fun little plane!
@truckpilotnate2972
2 жыл бұрын
I think it looks really good. I really like the silver. Can’t wait for more. Good job, guys!
@ColbyOsborn
2 жыл бұрын
Thanks!
@StephenReynolds_MasterMind
2 ай бұрын
Wow, Great Job!
@flyifri
2 жыл бұрын
Looking real good there Colby. Thanks for the update with thumbs up to all those helping you.!
@markwebb8013
2 жыл бұрын
Very good video nice to see the family support.
@scratchbuilder5952
2 жыл бұрын
You explain the process really well, thanks for taking the time to post this
@mahamed3208
4 ай бұрын
Thank you very much ❤
@brettgerber795
2 жыл бұрын
Looking great! I like to hear about Oratex since that’s what we plan on using with our 5 as well.
@ColbyOsborn
2 жыл бұрын
Thanks!
@clarencehopkins7832
8 ай бұрын
Excellent stuff bro
@mahamed3208
4 ай бұрын
You are great ❤
@donwtsn
2 жыл бұрын
Mate congratulations and well done! That looks awesome! You will be flying in no time
@ColbyOsborn
2 жыл бұрын
Thanks Don! I'm humbled that a sheet metal magician would complement our fabric covering. 😁
@donwtsn
2 жыл бұрын
@@ColbyOsborn fabric covering is a whole other art form. And to come up with a result like that is a testament to both of your efforts. Love it
@freitasn1029
2 жыл бұрын
Ola meu nobre, seu avião ta ficando lindo!!!
@dougkelsch
2 жыл бұрын
Great video. Thanks for the work.
@kieyavorsky2188
2 жыл бұрын
would it be possible to see a "long" version of this video? to help future builders?
@kevventer
5 ай бұрын
Hey Colby. I sure hope you are still building your plane. Would love to see any progress if there is. Kevin from 🇦🇺
@markdickens5011
2 жыл бұрын
Great video as usual! Your support experience was unfortunately what I feared when I never got a promised call back from Lars during my initial evaluation. Their followup leaves much to be desired.
@ColbyOsborn
2 жыл бұрын
Thanks Mark! Hope you’re enjoying covering your Companion with Stewart Systems.
@bearhawkblog3527
2 жыл бұрын
Great videos guys !
@ColbyOsborn
2 жыл бұрын
Thanks Nev!
@matthewmaxwell3845
2 жыл бұрын
You may have just solved my problem! I'm using oratex on my little one-seater.. and I have been having a terrible time passing the pull test. I've been using the same heat gun as you, but I've been setting the temp at 200°.. I noticed when you use the heat gun you set it at 400°. This has been very frustrating, and has been going on for a few weeks, just received fresh glue from baf... Many thanks, and I'll let you know
@ColbyOsborn
2 жыл бұрын
I bet you’ll have a lot better luck using 400° F. As an aside, I tried to note the temperate I was using in the lower corner of the screen. Different temps for different applications, but 400° F was typically the best temp for permanently setting the glue for us.
@matthewmaxwell3845
2 жыл бұрын
@@ColbyOsborn ... Your videos have already been more helpful than BAF has been.. if you don't mind, I may have more questions in the future...
@shelliebarnes1959
7 ай бұрын
Nice but for me I've covered several aircraft .sticking to Stits ceconite process
@yvescartilier6478
11 ай бұрын
Very very useful video !!! thanks !! One question: what is the reference of this grey color in ORATEX ?
@KitfoxPilot
2 жыл бұрын
Looks really nice. It's a good job to be finished with! Haha
@ColbyOsborn
2 жыл бұрын
Thanks Harlan! I’m excited to work on something new!
@asiasatvisionglobal7347
7 ай бұрын
Which type of fabrics are using for wings covering. lam Joseph lndia
@pilot41186
2 жыл бұрын
I'm not far from you guys.. I'd really like to see it!!! The bearhawk 5 is perfect for me but can't find one in person
@ColbyOsborn
2 жыл бұрын
Mark with Bearhawk Aircraft can get you in touch with me.
@pilot41186
2 жыл бұрын
@@ColbyOsborn thanks colby!
@avatarlegends4929
Жыл бұрын
Могу я спросить, сколько денег ушло на ткань для всего самолёта, то есть для крыльев и фюзеляжа? И где вы её покупали?
@EllipsisAircraft
5 ай бұрын
Search: Oratex Better Aircraft Fabric
@pablosebastiancariolo
Жыл бұрын
Excelent work, which is the Mtow of the aircraft?
@ColbyOsborn
Жыл бұрын
Thanks! 3,000 pounds.
@ReachAviation
2 жыл бұрын
Love yalls channel and build. Ive been thinking of doing my own build with oratex. Feel like its been a better choice than other traditional options?
@ColbyOsborn
2 жыл бұрын
Thanks! Unfortunately I don't have any experience working with other covering systems, so I'm not a referable source. From strictly a process standpoint my sense is it's more challenging and more stressful to cover with Oratex vs other options. But if you factor in finishing and painting, it's probably a wash. If I didn't expect to abuse our plane on gravel, I probably would've went a different route. But I'm happy we used Oratex and would use it again for something with a similar mission. Looking forward to seeing what you decide to build!
@MrAjtellier
11 ай бұрын
So did you get the plane finished?
@pazinternationalaviation
4 ай бұрын
Please Could you send me information on what type of material you used to cover? I don't know this material.
@ColbyOsborn
4 ай бұрын
If you search "oratex aircraft fabric" the search engine should return your distributor.
@jshulsky
2 жыл бұрын
Brilliant Work! Colby. The quality of your build is exceptional. I'm curious, what you would budget for the build of the BH5? Are you planning to make it IFR capable? Continued success and Clear Skies! joesky!
@ColbyOsborn
2 жыл бұрын
Thanks, Joseph! Our plane will not be IFR capable. Although it wouldn't be too difficult to add this capability down the road if we change our mind. I believe ours will come in around 160k. I think one could bring that down closer to 100k with a used prop, mid time engine or doing a field overhaul yourself, cover with polyfiber, and a very basic panel. But it would also be very easy to spend well over 200k with many of the commonly chosen options like a new engine, 3-blade composite prop, professionally made seats, IFR panel, hiring someone to complete your panel, and hiring a professional to paint it.
@jshulsky
2 жыл бұрын
@@ColbyOsborn It's all about the mission and budget! I love the New Sling High Wing but $250K if you want it IFR capable, plus they told me its now a 2+ year wait because they have so many orders. I like your choice of the Oratex too! Did you say you are going to Oratex the interior? Is that standard? I'm wondering if that would give you any insulation quality (like a double pane window) Can't wait to see your power plant and avionic choices. Clear Skies, joesky
@ColbyOsborn
2 жыл бұрын
@@jshulsky We did install Oratex in the interior. Mostly just in the baggage area. Using fabric on the interior seems to be a pretty popular choice amongst Bearhawk builders. I'm sure the fabric helps seal things up a little more and maybe has a slight insulating benefit, but I'm guessing it's not a noticeable amount. I think it's mostly just for looks, and to protect the exterior fabric from being damaged from the inside.
@sonshinelight
Жыл бұрын
Hey Colby, Amanda. Are you coming to Oshkosh this year? Hope so. Bearhawk get together Tuesday. ..Brian, Cora and Sean.
@ColbyOsborn
Жыл бұрын
Hey Brian. I was roaming the mountains last week, so I missed Oshkosh this year. Hope you all had a great time!
@sonshinelight
Жыл бұрын
@@ColbyOsborn Hi Colby. Ozh was awesome. Heading for Sturgis now. Got the bikes on the ground. After that, Yellowstone and back home.
@prashanthpoojary5065
2 жыл бұрын
Whitch type of wrapper u used this?
@kuss2594
Жыл бұрын
Colby is “all silver” the final plan or is it just a base coat for some paint design?
@ColbyOsborn
Жыл бұрын
Silver will be the primary color. I'm currently planning to paint the nose black, with a little striping down the sides as well.
@geoffreyblake2765
2 жыл бұрын
What would say about using STITZ for covering ? Is there a plan/procedure for covering in aluminum ?
@ColbyOsborn
2 жыл бұрын
Lots of Bearhawk builders use stitz or polyfiber. Economical and has stood the test of time. It’s heavier and requires a fair bit of PPE that I didn’t want to deal with if I didn’t have to. If I ever build a plane more for show I would certainly consider using it though. Covering the Bearhawk with aluminum is strongly discourage, so it’s not something I looked into much. I believe there’s some discussion related to that on the Bearhawk Forum if it’s something you’re interested in.
@freitasn1029
2 жыл бұрын
Por favor olha nas suas coisas se tem um projeto ai do kitfox para me vender???
@husseinsalman4759
11 ай бұрын
How did you learn to design planes, ? your friend from Iraq
@DavidJohnson-tx3wj
Ай бұрын
good video but the music went too loud between talking
@bernardmauge8613
Жыл бұрын
I would never ever cover the belly of a bush plane with fabric! WTF
@davefreeman6105
Жыл бұрын
lol, I can't wait until this noob finds out even the tail feathers on a bush plane are covered with fabric.
Пікірлер: 66