I thought this was an episode about the Foxbody Mustang... it's actually a matco tool commercial
@BuzzLOLOL
3 жыл бұрын
It's not a Mustang but a Mazda with Mustang badges... since 1979...
@ProjectFairmont
3 жыл бұрын
@@BuzzLOLOL ah nope. Although Mazda used that 4cyl in its version of the Ranger.
@BuzzLOLOL
3 жыл бұрын
@@ProjectFairmont - Looked like a Mazda to me..
@jhershy1381
3 жыл бұрын
Independant people make better docu mod videos. Commercial editing and tv broadcast mentality, Im about totally over it.
@sunahgamer321l4
2 жыл бұрын
@@BuzzLOLOL tbf its a mazda thats been kicking ass at the drag strip since '79
@jrrful
3 жыл бұрын
Would of liked more video of build instead of half the episode being a Matco commercial….I understand bills have to get paid, but come on
@BobbyOfEarth
3 жыл бұрын
Most of these RTM power nation videos were made and paid for a decade ago. And, since so many people have walked away from TV, we're witnessing the big corporations infecting alternative platforms to bolster their control matrix. Their viewer numbers seem to indicate more rejection on this platform as well..
@shawnrenaud2252
3 жыл бұрын
You mean you couldn't read the big words and got frustrated?
@MrEhole
3 жыл бұрын
Thanks for the looooong Matco commercial.
@halnywiatr
3 жыл бұрын
POWERNATION: "Oh no; rust" Everyone north of I-80 and east of I-29: "??? What rust ???"
@bryceholmes5178
3 жыл бұрын
I'm at I80 and I29 with my rusted out powerstroke. I'm one of the a$$holes that puts the salt down on the interstate in Nebraska...
@camkonuk6614
3 жыл бұрын
Im in Omaha. I second this
@bryceholmes5178
3 жыл бұрын
@@camkonuk6614 Omaha as well.
@dannythompson1948
3 жыл бұрын
Looked like california rust. I'd seriously reconsider my life choices if my impact couldnt break those loose.
@camkonuk6614
3 жыл бұрын
@@bryceholmes5178 i drive a black 17 ecoboost mustang around pacific and 72nd if you catch me around.
@BobbyOfEarth
3 жыл бұрын
Just so Power Nation knows, I'm here to watch the video title ..not MATCO infomercials.
@eliascorteslopez1094
3 жыл бұрын
This long matco commercial reminds me of an Organo Gold coffe pyramid scheme meeting lol
@eliascorteslopez1094
3 жыл бұрын
Yeah Orgasmo gold said, if you go above and beyond on your sales you can get a Huracan Lambo or the v12 Mercedes blah blah ......blah. and if you refer people in and they sell they can get a lambo,lol
@trainsbangsandautomobiles824
3 жыл бұрын
"With just 3 simple things; A lift, a jack and..." Whoa there partner, I don't think a lift is considered a "simple" tool 😂
@SladeM.
3 жыл бұрын
Matco Aluminator V8 Turns a 4-Cylinder Matco Into Matco-Cross Beast: Part 1 - Matco Power S1, E11
@Snakez011587
3 жыл бұрын
A few simple tools like an (2000) dollar lift
@thadthurlow
3 жыл бұрын
You clearly have no idea how much lifts cost. Your estimate is 3x what you can buy a 2 post lift for...
@Snakez011587
3 жыл бұрын
@@thadthurlow k
@thescottishhammer7570
3 жыл бұрын
I see brand new 2-post lifts for $2500 all day. Not sure where you're seeing $8k lifts
@gabecastillo1634
3 жыл бұрын
@@thadthurlow link me a lift for that price and I’ll buy rn
@thadthurlow
3 жыл бұрын
@@gabecastillo1634 The op edited his comment. He originally said $8000 instead of $2000
@TheKiltedYaksman1
3 жыл бұрын
Man, those cheapass Ebay headlights are terrible.
@eliascorteslopez1094
3 жыл бұрын
Made in china....chinas finest lol
@johnkilo3
3 жыл бұрын
"Removed the engine with 3 simple things, a lift..." yeah, because everyone has a lift in their garage and can do it this way.
@johngregory4801
3 жыл бұрын
You wouldn't believe how many lifts I delivered to homes when I drove a truck. The 16' ones barely fit on the truck's rail lift... "Fun times."
@blacknova23
3 жыл бұрын
Why did ya'll post this old ass video? Isn't this over 10 years ago?
@mattc420
3 жыл бұрын
I thought I saw this on spike tv back in 2005
@CarguyEd5150
3 жыл бұрын
Too much MATCO commercial and not enough focus on the car. @Powernation, we get that the bills need to be paid, but come on...it's ridiculous.
@BigBalledBastard
3 жыл бұрын
Jesus Christ, just be honest this was an infomercial for MATCO tools!
@charlesmccluskey1427
3 жыл бұрын
@lr 21 ... and go straight to the MATCO commercials??
@undertheyarrowbear
3 жыл бұрын
I agree. Screwed over waiting to see if they had to hack the strut towers or move the master cylinder ect. Its just an ad for Matco. My fault for not bailing 15 mins into it. About to bail on PN completely.
@Adrian_Supra
3 жыл бұрын
Seriously. This was a show about the tools with a commercial about an engine removal from an old mustang.
@JoeRocket-sf6qs
3 жыл бұрын
All this horsepower horse shit t.v show ever was,from now to back in the day when it was once a week on Sunday afternoon,1 giant commercial for jegs or holly or Matco or whoever gave enough cash.
@shawnrenaud2252
3 жыл бұрын
@@undertheyarrowbear My sentiments exactly.
@TheZProtocol
3 жыл бұрын
It would be cool if someone swapped out the original 2.3L 4 cylinder for a modern 2.3L Ecoboost and upgrade the suspension, body and brakes as well
@daronshellehamer425
3 жыл бұрын
yeah and made it a modern day Svo
@ShaunHensley
3 жыл бұрын
Came here to say this
@aaronburratwood.6957
3 жыл бұрын
I just got back last night from a 1100 mile trip to go pick up a ‘93 GT mustang with a 347stroker and a built tremac five speed. I bought it for $500 BUT it was parked next to a shop when it burnt down. The car is trash but the engine compartment is still good, hoses aren’t even melted. I’ve got an ‘84 t-top hatch that it’s all going in next.
@landondosch7841
3 жыл бұрын
Steal of a deal!
@robertelee6712
3 жыл бұрын
I've been looking for a 4 eye coupe with T tops. It's my unicorn that I can't find.
@mantisushi
3 жыл бұрын
Coyotes need to rev to at least 7k, 75-8 ideally, that's where they shine the most
@southernstar4353
3 жыл бұрын
why dont you just make a matco tool episode and talk about their tools and stuff, people will watch anything on youtube no need to shoehorn it in an episode about a foxbody
@joeschlotthauer840
3 жыл бұрын
8 minutes of MATCO Tools was painful...
@schleprok6333
3 жыл бұрын
Just looked into becoming a MATCO tool franchise... more of a scam than an opportunity. More fees upfront than you can shake a stick at. And you're penalized if you make sales "outside of your call list" regardless of who initiated the sale... Matco makes their money... but penalized their salespeople... Won't be buying any more matco tools...
@craigs7069
3 жыл бұрын
I need that 4cyl in my car. Mine is siezed. Since I can't afford to upgrade my fox body
@coryjohnson6548
3 жыл бұрын
How is that motor have 6 bolt mains? I paused the video and zoomed in at 14:55 and I only count 4?
@electedsphinx4086
3 жыл бұрын
Y’all should do a full 99-04 new edge mustang build😍😍
@j.martinez6077
3 жыл бұрын
Does matco sell tools though?🤔
@mintycbo
3 жыл бұрын
Longest Matco commercial. Ever. Oh yeah... forgot why I was here.
@DraconX3
3 жыл бұрын
"Street Legal" South Carolina: LoL whats that mean. Everythings street legal here.
@toycoma98
3 жыл бұрын
Matco tools, never heard of them, all we have in Guam is husky from home depot. Matco needs to come to guam.
@toycoma98
3 жыл бұрын
@Wayne Flanigan Nope no harbor freight here either
@leifhietala8074
3 жыл бұрын
That 2.3 is a fertile field for power adders. You can turbo the heck out of those and get crazy good numbers for such a modest mill. How about a build video on that old thing, installing some new power under the hood of another Ranger?
@trainsbangsandautomobiles824
3 жыл бұрын
I'da kept the 2.3 and boosted it.
@jeremymurphy7320
3 жыл бұрын
"The Amish is strong with this one" - Darth Vader.
@shawnrenaud2252
3 жыл бұрын
Ha ha! Luckily, his winning personality shines through! Lol!
@captaincook2204
3 жыл бұрын
I like engine power but this has got to be their worst episode.
@rhubarbpie2027
3 жыл бұрын
Remember that dirt track Lima 2.3L y'all did a while back? That would be a fun project for the engine that you pulled out.
@HotRod8625
3 жыл бұрын
Matco tools suck. All they are is rebranded/engineered tools. They do have a few tools worth buying, but you really have to look.
@mplante7352
3 жыл бұрын
Yep, we used to have dealers here but they either went bust of left. I traded all my stuff for snap on and Mac tools. the tools are useless if you can't get service and warranted. and yes Matco's hardline tools like ratchets and screwdrivers they dont even make in house, no Thanks. I call my Snap on and Mac dealers and i can get stuff overnighted if need be, i don't have to go looking for stuff it's a text or a phone call away. They get my money.
@joeeaston7210
3 жыл бұрын
I subscribe to this channel to find out info on builds, and the people who make after market products, to be informed to make good decisions. about how to make big power without wasting money, I had always respected this channel before. But how should I feel when I got 5 minutes of info so fast, and saw 15 miutes praising matco instead? I now will For sure Never buy even 1 matco tool ever after feeling like they wasted my time, I'm confused. I feel betrayed or something. I just give up & I just unsubscribed from the channel, rats you & Matco ruined everything! I can only hope they gave you every tool they make times a million, and I will highly reconsider spending a fortune on Any Ford motor, & obviousy it's NOT FORDS FAULT!!!
@workdesu
3 жыл бұрын
"out with the old.. *in with the new!!* " thanks..i needed to hear that
@danielschaw6305
3 жыл бұрын
buy our overpriced tool set so we can pay for all these fancy cars we fix up.............. franchises is legalese for rich guys fn there hourly employees if harbor freight can sell it for 19.99 why does any other made in china tool sell for more?????????????????????
@chrismarsh9978
3 жыл бұрын
Thank You for the foot Lbs of torque not pounds feet of torque !!! You really don't understand how irritated that makes us Old Schoolers !!!
@xXBurntBaconXx
3 жыл бұрын
I run my factory 2011 5.0L to 7500 rpm, and once I went to 8000 rpm after messing with my SCT. Now I only go to 7000.
@williamlopez4934
3 жыл бұрын
I never own a matco tool. Just own snap on or mac. Snap on is getting out of hand with there price.
@Masonhoskins3369
3 жыл бұрын
Never bought matco and probably won’t ever, mac tools all the way.
@eliascorteslopez1094
3 жыл бұрын
I buy Stanley tools, if I forget or loose a tool, I just buy another one no worries. Over priced tools, naaaah.
@williamlopez4934
3 жыл бұрын
@@eliascorteslopez1094 thats so true.. i lost a snap on socket and i got so mad.. harbor freight
@eliascorteslopez1094
3 жыл бұрын
@@williamlopez4934 yeah I have this crappy habit of loosing tools, but loosing a Stanley tool is not bad .
@mattc420
3 жыл бұрын
Do you guys work on these in Cookeville ? Ive been watching you guys since spike tv and beyond. I seen you guys at rhino liner in Cookeville one time. Just wondering.
@shawnrenaud2252
3 жыл бұрын
The main project was cut off at 5 minutes. Half the episode was dedicated to something else and I didn't watch. They came back near the end, but this is why I rarely click on powernation suggestions.
@oldschool8432
3 жыл бұрын
Nice engine set-up but expensive
@isaiaslopez8974
3 жыл бұрын
Everything PN does is expensive......
@toxicmasculinity7870
3 жыл бұрын
Isn’t the 2.3 liter an engine thats sought after in the aftermarket scene? I know a similar build show such as this built a 2.3 Lima engine for dirt track racing
@kerloz5192
3 жыл бұрын
The macabre newsprint inversely destroy because susan connoly wobble athwart a mellow mimosa. tidy, second rutabaga
@OriginalMomo
3 жыл бұрын
“… with 3 simple things…” umm ya… $200K worth of equipment… 🤦🏼♂️☠️😡
@alfredo3895
Жыл бұрын
porqueri4 no fue swap fue para promosionar tools
@Hamsteren91
3 жыл бұрын
One half was a commercial for tools and the other half was a tool talking over the sweet sound of a coyote, what's the point of a dyno video if you are talking over the engine sound.
@jackdaniels2657
3 жыл бұрын
Marco doesn't make tools they are just a brand they buy tools ND have the manufacturer put their logo on it
@jacobkmiller
3 жыл бұрын
ya. this just showed a fox body getting tore down.. im going to watch Hoonigan or Rob Dahm....
@raulrodriguez8948
3 жыл бұрын
Should of just went with a gen 2 coyote. Stock internals can hold up to 900 whp.
@kevinbarrett9615
3 жыл бұрын
Agreed, hate the infomercial, guess it pays the bills.
@JerseyTom
3 жыл бұрын
LOL @ 8 minute Matco commercial. No wonder TV is dead.
@towertito2149
2 жыл бұрын
So 6 mins of the build and 27 mins of advertising from matco. Lame!!
@larryw5429
3 жыл бұрын
Can take a junkyard LS and throw a cam and valve springs at it and it will put down more than that lol!
@leftcoastdrifter
3 жыл бұрын
But will the VCT's stay on the Coyote this time? Guess we'll have to wait and find out.
@notmyname9588
3 жыл бұрын
I hate it when they put so many ads in there videos it bad enough youtube itself has so many ads
@SirPengu3000
3 жыл бұрын
Broooooo I literally live in San Antonio, how’d I’d not hear about this.
@apismellifera1000
2 жыл бұрын
Love to put that Coyote Aluminator into a 67 Mustang fastback
@piptyson5512
3 жыл бұрын
Wonder how much power it made above 6500?
@therefactory8114
3 жыл бұрын
No, just no on the 1 piece headlights, it's not 2005.
@ipkissaragon8536
3 жыл бұрын
Came to see a fox 🦊 build got brainwashed by Matco …
@donovan007007
3 жыл бұрын
Part 87: It drives, but don’t look too closely!
@brianhanel6897
3 жыл бұрын
Nothing says a professional works here like a set of snap on FB tools😁
2:11 it's just locktight alittle heat and those bolts are out
@ace03cobra67
3 жыл бұрын
i saw the foxbody notch back mustang, i click on it
@vigg69
3 жыл бұрын
450 hp 6500rpm on a coyote spin that bitch to 7500 at least
@joshlara8237
3 жыл бұрын
What the hell it had a clutch fan my 93 2.3l has a electric fan
@L3giT_Hax
3 жыл бұрын
Wouldn't building a lighter turbocharged 4 cylinder be better for time attack or is the weight distribution better when a v8 is under the hood?
@mattc420
3 жыл бұрын
Yes. It would be much faster on a track.
@blackwolfjr1909
3 жыл бұрын
When are you guys going to do an OBS dually build
@Smurf5738
3 жыл бұрын
God damn, is it a engine swap or a tool commercial?
@turbotheamericanstaffy
3 жыл бұрын
Good to see a Coyote instead of a LS going into a FoxBody
@borilopez8581
3 жыл бұрын
Yesss Mustangs Fords power not boring LS
@chestercallahan8856
3 жыл бұрын
This car has lest rust underneath than my 09
@ridemotoeveryday
3 жыл бұрын
I love the show and all the work yall do!! I like the coyote engines but they are too girthy. Kinda ruins the weight balance in a fox. I love my sbf tucked up into the firewall! My dream setup for corner carving is an aluminum 363 big bore with a transaxle! sla up front and irs out back!
@slowbra94
3 жыл бұрын
An aluminator weights about 425 and a 302 w weighs about 450. Obviously aluminum heads intake and forged jnternals change the weight and may give tbe windsor a small advantage. But considering a bolt on coyote makes about as much as a windsor maxes out at id say the 30 pounds it may gain dont mean much
@ridemotoeveryday
3 жыл бұрын
@@slowbra94 To me its the size, girth. They sit pretty far forward adding a larger percentage of weight on the front tires. I believe an aluminum block 302 base big bore would offer more potential/better weight distribution in a fox for road racing. In drag racing/drifting the coyote would offer more potential because it's a baddass engine with gobs of power potential.
@slowbra94
3 жыл бұрын
@@ridemotoeveryday @RidemotoEveryday fair point. Im looking at it from primarily a drag racing perspective of weight and power. I could see something like a strong turbo 4 or I6 performing better because of the weight distribution. But im pretty sure a few companies have come up with ways to move the engine back in this particular swap. Or you could always just use a motor plate instead of mounts and but it almost completely against the firewall
@ridemotoeveryday
3 жыл бұрын
@@slowbra94 Thst motor kills it in drag racing! I have my 302 against the firewall, aftermarket kmember. The Coyote just takes up alot of real-estate, I definitely love the coyote and it's capability. But love my old pushrod v8's more. If I had the money I'd piss everyone off and buy a new mustang and put a sbf in it.😁 I do my own work too so I have lots of ideas.
@slowbra94
3 жыл бұрын
@@ridemotoeveryday i agree pushrods are just different. I daily and drag a 94 cobra and my best friend just finished his 347 carbed 88 fox. The real dream now is to put the 7.3 godzilla into these cars 🤣 pushrod and capability combined
@race-all
3 жыл бұрын
According to EPA it's not legal.
@vipertv6010
3 жыл бұрын
Shaggy where you left Scooby-Doo 😁
@OishOakland
3 жыл бұрын
Can I get the air intake to the 4 cylinder
@nonameavailable7914
3 жыл бұрын
Not here to watch a Marco commercial...
@MrAcuta73
3 жыл бұрын
"Unique" oil squirter stock....4G54B Astron. Starion/Conquest. = P Beat the Aluminator by a fair bit.
@zaccivy2061
3 жыл бұрын
What happened to Mike Galley?
@sinistersilverado965
3 жыл бұрын
You should of LS swapped it
@brianwoodstock2344
3 жыл бұрын
Total goober. Nuf said.
@steveshumard475
3 жыл бұрын
Do they ever get back to the car?
@leunamarrap3316
Жыл бұрын
What happen to this built
@shawmaster97
3 жыл бұрын
At 6:17, in the collage the black guys are the same, just with his shirt color switched. 😂 why?
@americanpatriot2.06
3 жыл бұрын
The best thing on that "mustang" 🙄 were the brand new tires!
@chaoszombie9995
3 жыл бұрын
why do you think they did what they did to it lmao
@jackdaniels2657
3 жыл бұрын
The lugnuts was lose
@TDRM1989
3 жыл бұрын
Cool... Do car stuff...
@jtbbrown3457
Жыл бұрын
Nice commercial 👌
@Sleeper_Solutions
3 жыл бұрын
You guys need to rev it to 7500
@brianclifford9597
3 жыл бұрын
I figured you were going to remove everything at once just like you did 👍👍
@schwanzmunster2503
3 жыл бұрын
My dad and I put a 472 BBF in one of these and drag race it.
@elmerfudpucker3204
3 жыл бұрын
I had a 520 BBF in a 1989. Ripped the trailing arm mounts out of the frame for the rear differential. That thing was sick fast.
@SIC_SIX_7
3 жыл бұрын
What I would do to have an aluminator for my new edge mustang!! Ughh
@Yasin5791-d7u
3 жыл бұрын
3:10 half chrisfix
@Yash-6138
3 жыл бұрын
46K subs needed after that 1M subs congratulations in advance 😃😃
@mcgavin098
Жыл бұрын
Skip 5:00 to 13:30.
@cheif10thumbs
3 жыл бұрын
You can find Matco hand tools for half price or less at Harbor Freight.
Пікірлер: 208