Walk around, AED dyno tune, and a couple 1-3 pulls Gen2 Coyote with 3650 5 speed transmission Pcpgarage pcpalan notch fox foxbody gen1 gen2 ford racing
That car looks great. For a N/A motor that thing rips gears. What a great daily, dependable fast car. That is something I would like versus shelling out a lot for a newer mustang. Great review.
@Alanc419
Жыл бұрын
Your swaps look OEM. Bro, you’ve elevated your craft to the next level! There are a lot of butchers out there with full-on shops and they don’t even come close to the cleanliness and complexity of your Coyote swaps! Get that $$$, Brother!
@robert23497
Жыл бұрын
Excellent work bro. Love that you kept streetability in mind on suspension on a car that just plays from traffic light to traffic light. I would DEFINITELY move the battery to the trunk on the passenger side and I'd go with optima but for a budget.......you crushed it. Thanks for the quality work Alan!!!!!!!
@SamM-qk9xo
Жыл бұрын
Respect. This guy seems to do good work and does it himself. I wish he had a cameraman to make vids everytime he worked in the garage making these vids.
@gr8tfoxes617
Жыл бұрын
Ya keep them coming Alan. Your videos have been a go to source for no BS ways to make things work. Always clean work.
@johnnyarmstrong7013
Жыл бұрын
Great to see you back. Appreciate the coyote swap content. Keep it coming man.
@andyfreitas5651
Жыл бұрын
I like the attention to detail with the wheel liners…. I see you bro!
@seeunow44
Жыл бұрын
Love the content and all the details….Specifics as described help us all ….in progress with mine…MMS K-member with coil over(street valving ) hope it’s not “too harsh” as you mentioned …. Please keep them coming
@DragSlicks
Жыл бұрын
I want a coyote swapped Fox so bad the idea of the coyote in fox is just dope as fuck and you couldn’t go wrong with a beautiful coyote
@DragSlicks
Жыл бұрын
God damn that coyote sounds beautiful in the Foxbody I love it👌
@itspoffy
4 ай бұрын
Wow. Burning in 3rd and maybe 4th. Thats sick.
@ronniehaley729
Жыл бұрын
Beautiful car! Looks identical to the one I had in high school, '1998'
@NCpilot79
Жыл бұрын
Top notch work, as usual. Thanks for posting- best mustang channel on KZitem.
@Cuete590
3 ай бұрын
How is going boss I love the ride I’m starting to get into mustangs lately I’ve always wanted one of these.. keep up the good work 💪🐎
@pcpalan
3 ай бұрын
Welcome to the club! Glad to have ya
@JoanWilder1985
Жыл бұрын
Enjoy your videos and you do great work! 👍🐺
@chosenchild8416
Жыл бұрын
Absolutely beautiful. This is my dream Foxbody.
@charlesjones3886
6 ай бұрын
Keep up the good work bro. I'm loving it. ❤
@EJ257IHI
Жыл бұрын
That's a really nice clean setup, I really like those wheels.
@jermaine5852
Жыл бұрын
Here's to drop a like, I will watch this later as soon as I get out of this d*** traffic.
@pcpalan
Жыл бұрын
Eyes on the road!
@RichMindedRacing
8 ай бұрын
Watup bro I love your channel I’m doing a gen3 10r80 swap on my fox and need help figuring out the fuel system I’m running a single turbo on it and wanna run a return style fuel system you got any suggestions for me? And have you ever installed a 2020 dash in a fox? I also have that and was wanting some pointers
@Voodoo_raskal
Ай бұрын
Awesome!! Bought a 88 gt to do the same thing but once the prices hit me I decide to go ls haha😅ik I’ll prob get hate but it was more reliable and more power than the stock 302 in it, would like to coyote swap one day tho if I don’t decide to go drag build
@adalbertoalicea8585
Жыл бұрын
Just found this channel love it. Trying to figure it out to coyote swap my fox body
@pcpalan
Жыл бұрын
Welcome to the channel. Drop some comments, few likes, maybe sub, watch some vids.. dont be shy now
@adalbertoalicea8585
Жыл бұрын
Just subscribed 👍
@anthonylaudano9435
Жыл бұрын
@pcpalan MAN I LOVE FOXBODYS AND I KNOW HOW THEY RUN LOL I HAVE A RED 87 MUSTANG GT WITH T TOPS AND MY VIBRANT RED 93 COBRA AND THEY JUST HAVE EXHAUST AND THEY RUN NICE BUT I COULDN'T EVEN IMAGINE A FOXBODY WITH 6 700HP LOL THEY GOTTA BE SCARY. LOL I ALSO HAVE 2 SUPER SNAKES AND MY COUPE IS OVER 900HP AND HONESTLY THE CAR SCARES ME LOL.
@clarkbubar8687
Жыл бұрын
I love that Blue Convertible!!
@brucesvt96
Жыл бұрын
Love this channel love the swaps. Keeps me dreaming about my 96 cobra getting a gen 1(based on my budget lol)
@midnight347
8 ай бұрын
Nothing wrong with a gen 1. With a cj and cams they can do 500 to the wheels on e85 that is a ton of power in an older lighter mustang
@no1but24
4 ай бұрын
Like how you used a factory air box pulling cold air from the front of the car instead of just a open K&N under the hood.
@A2J_Tim
9 ай бұрын
that thing rips pretty good, looks like it has alot more jam than the original 5.0 with a paxton.
@thruitallauto2538
Жыл бұрын
Just found ya channel been watching all weekend, great work man, I’m on my last video, oh an I subscribed too
@bobbylight5686
Жыл бұрын
Dude. Thing looks sick and fast as F!
@BengyM
8 ай бұрын
Great video! What headers did you use with the AJE K-Member?
@pcpalan
7 ай бұрын
Bbk
@dewaynehall7104
Жыл бұрын
Nice ride man if I didn't own a 2011 coyote mustang I might would consider coyote swapping my 90 lx hatchback
@Wowzers2006
Жыл бұрын
It's always good to more of your content!
@MrTesedgar
Жыл бұрын
Very nice 👌. How much would u charger to stroke my 302 foxbody 5 speed . Trying to make anything from 300 to 400hp or any ideas would appreciate am base here in Los Angeles. Thanks
@angelroman7044
8 ай бұрын
Dash works perfect
@GTNBY2
Жыл бұрын
I haven't looked in a while, but could you make a playlist of a start to finish swap? My 90gt REALLY NEEDS A COYOTE!!!!!
@mikeygarcia2730
Жыл бұрын
Great channel so you can run a returnless system with corvette filter even though control packs state return style fuel system is required? Thats pretty awesome nice and simple, less lines to run
@tomjacka7401
3 ай бұрын
thats a nice car
@urch1281
Жыл бұрын
Wish I had money 😢… I’d go straight to you for a swap. Keep up the great work bud!!
@JESSEPAVON
Жыл бұрын
I wanna do this swap too, i fix wrecked cars, how hard can it be?
@gerryj8839
Жыл бұрын
Love it! BTW, what's the part number for the mufflers- asking for a friend... LOL
@pcpalan
Жыл бұрын
These are magnaflows I believe. Not the bullet style ones
@chrisedwards2624
Жыл бұрын
Love it. What group battery is that? 56?
@G.Harley.Davidson
7 ай бұрын
Would a Coyote ever be able to make the whistle/drone of the 5.0 pushrod?
@YoBoyWoohoo
Жыл бұрын
BEST WORK BEST DEALS !!
@devinwilliams9058
Жыл бұрын
The mufflers that big of a secret🤔🤝 if it sound good share
@x04svtx
Жыл бұрын
He be gatekeeping, than complain that no one helped him lmao
@MRSOTELO408
Жыл бұрын
Badass Video Alan. Awesome work
@pnw_pharmer3990
Жыл бұрын
Good video once again bro. Could have thrown these coyote swaps off with my Terminator swap one bro. Not the end of the world thow lol. Looks dam good bro.
@02dannymex
Жыл бұрын
Yoo!!! You have termi swapped fox?
@characterdevelopment2361
4 ай бұрын
Was there anything special you had todo to get the 3650 to fit
@gmtech9884
Жыл бұрын
Beast car… I’m doing a swap how does the vets delete work on this car???? I’m doing a swap trying to figure that out.
@deanb949
11 ай бұрын
It's VATS, you get a tuner to delete it from the PCM
@bodieb1233
10 ай бұрын
Great video. Clean. Makes me think about my car ! Could be interesting ! ???
@sixoid4104
Жыл бұрын
I’m big on keeping foxbodies pushrod, coyote swaps aren’t really my thing but cool to see people putting the effort in.
@midnight347
8 ай бұрын
Have you driven dohc fords before or have you always just had pushrods? They drive really smooth and Rev smooth they really are great engines.
@sixoid4104
8 ай бұрын
@@midnight347 yes I have, I also work at a mustang shop and have built plenty of both. Coyotes are cool and fantastic engines, in my opinion the best on the market. BUT I personally like the sound and simplicity of a pushrod motor, it’s old school and badass. Coyotes don’t sound that good to me
@pcpalan
8 ай бұрын
If you had a Foxbody roller with no engine or transmission, and I said “Bring me your roller and you can pick between a stock SBF/T5 or a Coyote/T56 and It won’t cost you a single dollar.” You are still going to pick the stock SBF?
@sixoid4104
8 ай бұрын
@@pcpalan nobody said stock lol. I’m picking a pushrod anyway of the week, it’s what I prefer.
@BengyM
8 ай бұрын
I see you don’t respond to comments. If you respond to my question I’ll subscribe. What headers did you go with with the AJE K-member?
@pcpalan
8 ай бұрын
I’d say I respond to about 75% of the questions i get. I don’t have notifications turned on so occasionally I scroll through comments. I tend to scroll past the questions that require minimal effort and research or have already been addressed and answered in numerous videos or comments. To answer your question, it would depend on your transmission. If you are running any type of manual transmission then BBK headers are my go to. Always in stock, decent craftsmanship, and a fair price. You can keep your sub though , I’m not a “youtube influencer” hurting for subscribers. Thanks though. Good luck with your project
@mrprfct7069
Жыл бұрын
Are you using ford control pack or what the recycler gave you?
@venomfastback
Жыл бұрын
Man, great work. I am fixing to start swapping my 86 SVO.
@JESSEPAVON
Жыл бұрын
I wanna do this swap too
@x04svtx
Жыл бұрын
What are you doing with stock svo motor and tranny? Id buy if you are in cali
@venomfastback
Жыл бұрын
@@x04svtx that stinks, I'm in Texas. I'm going to sell everything that I pulled from the car. Esslinger bottom end kit with big valve head. Ported head, with roller cam and gutted upper intake. Also ported lower. Bob's log exhaust and upgraded turbo. Lots of good stuff.
@x04svtx
Жыл бұрын
@@venomfastback well, if for some crazy reason i go out there or vice versa lmk! Im veryyyy interested. Looking to have fun little turbo car
@x04svtx
Жыл бұрын
@@venomfastback i have a stock 93 2.3
@deadz0ne84
Жыл бұрын
Always good content and clean work.
@LynnTwinCustoms513
Жыл бұрын
That coyote rpm! Sounds good
@timc2745
Жыл бұрын
That's the way to do it.
@dforest8539
Ай бұрын
What AC dryer are you using?
@sendog1020
9 ай бұрын
Bad azz coyote. Is this a tremec 5 speed ?
@pcpalan
8 ай бұрын
Yes. This car has a built 3650 transmission.
@jasonpeters9478
Жыл бұрын
What exhaust manifolds did you use? I have an Aje k-member install.
@mattbo2003
Жыл бұрын
Clean AF!!!
@agemontana5072
Жыл бұрын
COYOTE SWAP G.O.A.T 🐐🔥 🫡
@siwash99
Жыл бұрын
Can’t wait to get one of these
@98saleen
5 ай бұрын
Nice job. New subscriber.
@FordsRule351
Жыл бұрын
What radiator and fan setup is that? Starting my GEN 3 swap here in a few weeks.
@GSPMotorsports
Жыл бұрын
Do u use f150 cams and a gen 2 control pack and just have it tuned for those cams?
@KM-uw4ez
Жыл бұрын
You do nice work bro. Very nice.
@keithrosier572
Жыл бұрын
Great work. Keep up the great info..
@derekval9722
7 ай бұрын
I just started watching your videos! Do you offer this work?
@pcpalan
7 ай бұрын
Ya
@ford351user
Жыл бұрын
Question. What kind of radiator over flow tank are you using ?
@moessti1583
Жыл бұрын
love you're swaps man. where are you located at? maybe you can help me complete my swap
@JESSEPAVON
Жыл бұрын
I wanna do this swap, where are you struggling? I think it’s some we can figure out.
@pcpalan
8 ай бұрын
Northern California
@seansadventures-flyingtrav7901
4 ай бұрын
That is awesome
@jameskocks4734
Жыл бұрын
i have dreamed of getting a fox and doing a coyote swap. wouldnt an f150 coyote be a lot cheaper?
@midnight347
8 ай бұрын
They're a little cheaper but not as much as you'd think.
@davidclark5283
9 ай бұрын
I've got a 2017 gt w 2018 Intake, cold air, borla catback. 22000 org miles. Body is total but drive train is 100% good. I need to sell drive train or get a body and do what yall did........
@pcpalan
8 ай бұрын
I’ll take it. Send me an email or leave me your phone number on a comment.
@nothanks81
Жыл бұрын
You tried those speed engineering headers for a swap yet?
@G.Harley.Davidson
7 ай бұрын
I’m afraid I’d lose control of the Foxbody with that coyote power, or at least that’s what I’m trying to convince myself.
@rafelcons4246
Жыл бұрын
What would you charge for a swap. If I have both the fox, and the 2013 gt running donor car?
@rodsfrenchies
Жыл бұрын
Yo brother I wanted to ask if you would be down to do a swap on a notchback I just got I own a 2013 coyote to get all the parts from
@rafamiranda4302
Жыл бұрын
How much dose it run you to build something like that’s?
@Json.-
Жыл бұрын
Definitely nice
@fahoooooooooooooood1
Жыл бұрын
Did you do any modifications to the K-member to adapt the Coyote? What motor mounts you have on
@zachhunter5702
Жыл бұрын
AJE has specific motor mounts that work with their K members. Basically, you can use the same K member and just buy the mounts to fit whatever motor you want whether windsor, mod, chevy or 460
@stephenfickjr3053
Жыл бұрын
Any videos on Dakota digital cluster install
@dreamchasnlin
Жыл бұрын
You should do a “how much it cost” vid
@brianclifford5881
Жыл бұрын
I want to see more of that 87 convertible
@Alanc419
Жыл бұрын
Lol@ Don’t ask me what mufflers I run 😂 But, they sound 🔥 🔥 🔥 🔥!!
@x04svtx
Жыл бұрын
Hes a gatekeeper lmao. Says he helps people but wont tell exhuast, and no, i do not want the setup. Just instantly noticed same thing
@raulperez8476
Жыл бұрын
Like ur videos, I want a coyote swap 👍🏻👍🏻
@justa5.0
Жыл бұрын
I have a 93 coupe and a coyote with trans with all do I need to do the swap?
@ej8883
Жыл бұрын
How much do you charge for a coyote swap bro?
@Thedoctor4x4
Жыл бұрын
What about the driveshaft? For the 6r80 Any budget option?
@pcpalan
Жыл бұрын
No
@hilariomendez9111
Жыл бұрын
Can you smog the vehicle like this with all this changes
@gsxroyce256
Жыл бұрын
I’ve noticed the best car builders have ADHD lol
@deanb949
11 ай бұрын
I was about to puke with all that camera dancing at the end 😮
@ernest345
Жыл бұрын
Nice Job.
@mica9977
Жыл бұрын
Hey its Tuesday put will take it ! How give us another 15min next Monday.
@gerardoortiz7455
Жыл бұрын
You are the best good video
@04titian
Жыл бұрын
How’s it going, been watching all your vids. How can I get a swap done by you?
@JESSEPAVON
Жыл бұрын
I wanna do this swap, don’t you think we can figure it out? I’m sure it’s harder than we think but I’m sure we can do it.
@shawngoff8290
Жыл бұрын
How much you charge to do a coyote swap?
@dees2kids981
5 ай бұрын
Where are you located?
@six50motors
Жыл бұрын
Gotta post more bro. Ppl wanna see what your doin.
@kevinx1829
Жыл бұрын
Love it...🔥🔥🔥
@shawngoff8290
Жыл бұрын
Love your builds!! Wish I could get you to do mine for me
@JESSEPAVON
Жыл бұрын
I’m dead set on a fox body gt, but would have to have a coyote engine. How hard can it be to swap, i fix wrecked cars and just about everything. You and i should figure it out together haha
@shawngoff8290
Жыл бұрын
@@JESSEPAVON you can bet your last dollar ima figure it out Grinder Torch welder everything fits lol jk but ima start my build soon for my wife to daily
Пікірлер: 151