Wow never seen anyone so clean and orderly just putting together a tool box before.
@bert1897
3 жыл бұрын
I think you missed a spot.
@maxgamino9033
Жыл бұрын
Thats somebody who values his posessions
@littleantennas
Жыл бұрын
Thank You!! I'm in a garage in AZ in the height of summer about to lose my mind trying to figure this thing out.
@Slickcanyon
4 жыл бұрын
Your video helped me greatly to assemble my tool box. I could not figure out how to get to the box inside the big box until I saw you turn your box over. When I did that I saw there was black tape holding down the lid and screws through the bottom holding the smaller box inside. Thanks for an informative video.
@eklin2012
2 жыл бұрын
same here. I had the same problem and your video helped me. Thanks
@praisethesun69
2 жыл бұрын
this blew my goddamn mind. I thought I was going crazy. I tried lifting it out, almost threw out my back, thought wow this is really wedged in there! tried tipping it forward, no dice, got out the pry bar. almost broke my new cabinet. why isn't it in the manual??? >_>
@Advanced_Arch_Way
3 жыл бұрын
I love this video. Something about cleaning makes me happy and content.
@SippinGoose1
3 жыл бұрын
Came here to figure out how to remove the smaller box from the bottom. Thanks.
@ohioyodertoter6827
5 жыл бұрын
quicker than a rabbit and cleaner than a doctor haha
@sanaria81
3 жыл бұрын
I’m an 39 year old female who loves handy projects. I’ve installed my own French doors, blown led strips in my tv, motherboards, ac fan/ thermostat, pool pump and filter system and so much more but this takes the cake. This is pretty simple yet so questionable. The instruction manual is ridiculous!!. Never have I seen an 12 page manual that tells you nothing related to the product with the exception of install “a single wheel” and remove “a single draw”. To everyone confused like myself: 1. The top attachment is mounted inside the bottom compartment which is sealed shut with black tape. (Don’t do like me and keep pulling wondering why it’s not lifting). 2. There are four screws holding the top compartment in place. They will be needed to permanently mount the item in place. (Don’t do like me and throw them, since most items mounted in packages are done with non essential items). 3. There are 2 rolling wheels(1 w/lock) and 2 stationary wheels. The instruction manual has the locking wheel being installed on the front right and like the video the other moving wheel should be installed behind it. (Don’t do like me and install them both in the front) 4. Remove all of the bottom console draws in whatever mysterious way you can to mount the top console. There is a little black latch that you press down to remove the draw. Some work with ease and some don’t. (The point where I give up) 5. There’s a lining mat included that’s sandwiched between the two consoles in the video. Never would have assumed it was to be sandwiched for such a small surface space left after mounting the top but Im going to cut mine to size to fit the very top locking compartment and the leftover will go around the bottom compartment. (If you want to place liners in all of your draws, they sell them at the dollar tree) 6. The last figure in the manual is something about a bearing and it’s the picture of the locking wheel, so I think it’s teaching you how to lock the wheel. They say you pay for what you get so let’s see where these $99 gets my husband. 🤷♀️ Happy Birthday Jonathan!! 04/11/2021 Pandemic Love on the Brain
@patriley936
Жыл бұрын
Thanks for posting this and for the comments - I thought this was a good deal when I saw it today for $220 but after I read the comments I think I should wait.
@danide7211
Жыл бұрын
I just purchased this online from Ace for $149. Order online and get it shipped or pickup at a store.
@Murphy007
3 жыл бұрын
I left the made in the USA sticker on the front I’m proud of that .
@RAYNE0912
3 жыл бұрын
Just picked this up online sale from Ace hardware for under $100, wanted to see what it was like before it arrives, guess I won't have issues figuring out how to remove the small toolbox.
@andrewdean1761
3 жыл бұрын
I just bought one too for the same price. Great deal getting for my dad for Father’s Day
@ricardohz5148
3 жыл бұрын
Yup super clean
@joeg816
5 жыл бұрын
Nice job. Unless I am totally missing it, the instructions do not tell you to put the rubber mat between the cabinets. They also do not tell you to remove the bottom drawer from the top cabinet which makes the installation impossible. Thanks for the visuals.
@theartifactory3637
5 жыл бұрын
Yeah. I may have gone a little rogue there. I wanted a buffer between the top and bottom cabinets, and I've seen other toolboxes assembled that way. Sometimes you have to make the things you own your own.
@joeg816
5 жыл бұрын
@@theartifactory3637 no, you actually did it the right way. Their instructions are lacking. Not impressed. If it wasn't for your video this thing would be in the trash heap in the front of my house right now.
@theartifactory3637
5 жыл бұрын
@@joeg816 In that case, I'm really glad the video was helpful!
@mabsonkutz5359
4 жыл бұрын
How do you open the chest
@theartifactory3637
4 жыл бұрын
@@mabsonkutz5359 I'm not sure I understand the question. Can you be more specific?
@Anatidaephobe
10 ай бұрын
Awesome thank you sooo much! I’m missing the instructions, lol.
@pjmisley
3 жыл бұрын
Anyone have any ideas on how to add a locking mechanism for the bottom half?
@whothefoxcares
3 жыл бұрын
Having wheels on a study tool chest will help when it's time to *bug out*
@whothefoxcares
3 жыл бұрын
Can the wheels be locked, if you need to rest on a steep hill when bugging out?
@mynameisman1254
3 жыл бұрын
@@whothefoxcares One wheel locks. One side swivels and one side is stationary. Check out Jason’s Reviews & More.
@julyjo3901
Жыл бұрын
Thank you!!!!!!
@esxcvr
3 жыл бұрын
Thanks
@glocn517
2 жыл бұрын
Bought mine at lowe’s but once I got home I noticed there is no key for the the lock on upper small box, did yours come with one?
@theartifactory3637
2 жыл бұрын
Mine did come with a key. I believe it was in the box with the casters and hardware. I’ve seen missing keys reported as an issue in the comments. Sorry for your trouble!
@bwilson0213
Жыл бұрын
Any idea how to order the parts for these? I've got a jacked up drawer slide I need to replace
@susiegoozie1
3 жыл бұрын
HI! Thanks for the video. I definitely would not have figured out how to get the little tool box out! Do you think there is any downside to not attaching the top box to the bottom one with the screws? The rubber mat seems to stop it from sliding around. Any thoughts? Thanks!
@theartifactory3637
3 жыл бұрын
I’m sure it’s just personal preference. I knew I was likely to be moving the box around a lot, so I wanted the top chest secure. If you feel the top chest is secure enough for your needs, or if you ever want to take it off and use it separately, I’m sure you can skip screwing it down.
@bkeberle
2 жыл бұрын
I can’t get the 4 sheet metal screws to thread at all to get the small box on top of the big box. Any suggestions?
@theartifactory3637
2 жыл бұрын
I had to drill the holes out a little on mine. They were just a bit too small.
@JesusLoverSEQM
2 жыл бұрын
Hey.! How is the material quality? Looks like a cheap material ? Or looks like a real Craftsman tool box ??
@elarr8733
3 жыл бұрын
Somehow everybody who gets one of these and makes a KZitem video about the setup has detents to hold the drawers shut. A lot of people who buy them from Amazon complain there's nothing to hold the drawers shut. That's the boat I'm in.
@theartifactory3637
3 жыл бұрын
Maybe try pushing the drawers closed a little harder?
@elarr8733
3 жыл бұрын
@@theartifactory3637 Thank you for the suggestion. I went out to my shed today and closed them extra hard. If I put my hand on the back of the unit and close the drawer with some extra oomph, it sounds and feels like it hits the back wall of the box. I'll try some little neo magnets.
@theartifactory3637
3 жыл бұрын
Hmm, that’s my only suggestion, unfortunately. I hope you get it figured out! I’m definitely getting reports that these boxes have some variation in the quality of their construction.
@nikilloster
Жыл бұрын
Two casters are fixed and two rotates?
@reddalchemy5970
3 жыл бұрын
Just got this cabinet and the freaking lockbar in the front is bent and will not come out :P Oh well, I will sort that out, but thanks for the video, very informative. I will be putting it together just like this once I get that lockbar out. ;)
@theartifactory3637
3 жыл бұрын
How did this story conclude? Were you able to get the lock bar out?
@j0nam79
2 жыл бұрын
How'd you secure the top cabinet on to it? Mine only came with 4 bolts which were for the wheels. Also, the bottom drawers aren't lockable right? Just the top cabinet.
@theartifactory3637
2 жыл бұрын
When I received mine, the top chest was inside the bottom chest secured with four bolts. I reused those to secure the top chest to the bottom chest. They didn’t fit at first, so I had to drill the holes out a little. I don’t believe there’s a way to lock the bottom set of drawers.
@mrsjoneskj57
3 жыл бұрын
Can you put a locking system on the bottom part
@theartifactory3637
3 жыл бұрын
As far as I can tell, only the top box locks.
@knewman30
3 жыл бұрын
2 of my casters don’t have bolt holes. The ones that don’t swivel. Am I missing something or is that a bad part?
@theartifactory3637
3 жыл бұрын
There should be four holes in each for four bolts to pass through and attach to the body of the toolbox. If they’re not there, I’d say it’s a bad part. Strange!
@donaldcrump6640
Жыл бұрын
What do you use now that 409 is discontinued?
@organfreak
Жыл бұрын
Fantastik is a superior product.
@Michael-so8gl
4 жыл бұрын
Mine came with hooks but I don't see where they go on the unit...
@theartifactory3637
4 жыл бұрын
I'm honestly not sure what hooks you're referring to. Mine didn't come with any that I'm aware of, unless they're in the trash with the packaging.
@kevinbarrow9226
4 жыл бұрын
i'm wondering if you put the wrong bolts in the castors due to the wobble and the other bolts not fitting for the upper unit?
@theartifactory3637
4 жыл бұрын
Kevin Barrow. Not that I’m aware of. The bolts for the castors came in the same box as the castors. There were 16 bolts and nuts, all uniform. There weren’t any others except for the self-tapping screws holding the small chest inside the big chest.
@kevinbarrow9226
4 жыл бұрын
The Artifactory I would assume then that you assembled it correctly. I was looking at possibly getting this for my enclosed trailer. Thank you for the info!
@theartifactory3637
4 жыл бұрын
Kevin Barrow. Great! It’s been a perfectly fine little tool box for the last year.
@Mirracobike12
4 жыл бұрын
how tall are you for reference
@theartifactory3637
4 жыл бұрын
Mirracobike12 I round up to 6 feet.
@theartifactory3637
4 жыл бұрын
But I’m 5’ 9”
@ponyboy2195
3 жыл бұрын
Wait I just bought this today your supposed to screw the top on with what screws
@theartifactory3637
3 жыл бұрын
I reused the screws that they used to screw the smaller chest into the bottom chest. As far as I could tell, they didn’t provide any others. I had to drill the provided holes out slightly to accommodate them.
@ponyboy2195
3 жыл бұрын
@@theartifactory3637 nice I will do that down the road I like the chest it's a 1st for along with some craftsman tools 298 piece set
@jefflax100
3 жыл бұрын
I couldn’t see anything at 6x speed so not much purpose to this.
@theartifactory3637
3 жыл бұрын
Thanks for the input. If it’s helpful, you can go to the drop-down and to “playback speed” and slow the video down to .25x.
Пікірлер: 77