Thank for video, I just bought one few weeks ago , the chain tension knob kept on turning counter clockwise and the chain became loose until I figured out the knob has turned really tight clockwise. I also didn't know how to take the knob out for cleaning until I watched your video. The manual that came with chainsaw never mentions any of these.
@Oddstories
4 жыл бұрын
The self adjust chain tightener that you have to roll with your thumb isn't working anymore. Any suggestions?
@HowToDoitright
4 жыл бұрын
Not sure. Try taking it apart. Maybe debris got inside. You can try cleaning it with brake cleaner and then lube it with WD40
@thecrazymanfromireland
4 жыл бұрын
Fantastic video my chainsaw was not oiling the chain so ill try this ..thanks
@robertbattenfeld5239
4 жыл бұрын
Good video but I don’t recommend wearing flip flops when working on a chain saw.
@HowToDoitright
4 жыл бұрын
Haha good advise but I didn’t use it. Was just doing maintenance:)
@gotocustudiofilmsthecheapb3802
4 жыл бұрын
or shorts lol but at least he wore Something hahah :)
@davidfellows1650
4 жыл бұрын
Thanks
@mansourramzey7711
5 жыл бұрын
Great video Do u have any video that shows how to fix oil leak. Tks
@HowToDoitright
5 жыл бұрын
Fixing oil leaks? Maybe it’s just the cap? I never had a leak except the cap which can be changed.
@mansourramzey7711
5 жыл бұрын
@@HowToDoitright tks i check that . Appreciate your response
@HowToDoitright
5 жыл бұрын
Oskar Dirlewanger I would call the company. Many times they will send you a cap as a courtesy. Other alternative-See if there is a rubber washer inside cap. You can also find a similar washer and replace it.
@Sheeeeeeeeeeeeiiitt
3 жыл бұрын
If leaking from under the cap use some Teflon tape around the threads. If the tank has a minor crack wash it with soapy water and apply nail polish or a plastic weld.
@mikeklecker5462
5 жыл бұрын
My Sears electric chainsaw will not start any suggestions?
@HowToDoitright
5 жыл бұрын
Mike Klecker try opening it up as I did like you are about to clean it. Turn the guide (where chain holds). See if you can turn by hand. While chain removed plug it in and try running the motor only without the chain. If motor runs out everything back and it should work. If motor don’t run at all after removing the chain then motor is bad. Not worth replacing motor due to cost.
@mikemarshall5312
4 жыл бұрын
Make sure the kick back safety guard handle handle on top of saw is not in forward position or saw will not turn on.
@bbrigman9382
4 жыл бұрын
What name brand/type of oil do you use?
@HowToDoitright
4 жыл бұрын
Honestly you can use any chain oil
@StevesDIYProjects7
Ай бұрын
you do know all chainsaw bars can be flipped. you can never install 1 wrong..... js.
@HowToDoitright
27 күн бұрын
Ahh. Good to know
@12Radius
5 жыл бұрын
How did it do for ya ..holding up nice so far?
@HowToDoitright
5 жыл бұрын
Love it. So far I cut down 4 trees and still sharp. Just make sure you keep it clean and topped off with chainsaw oil.
@12Radius
5 жыл бұрын
@@HowToDoitright Thanks a lot !!
@bufordmaddogtannen514
4 жыл бұрын
How do you get the kinks out of a chain
@HowToDoitright
4 жыл бұрын
Wash it with brake cleaner spray
@bufordmaddogtannen514
4 жыл бұрын
@@HowToDoitright I figured it out it was easy, Just took some flipping and un raveling.
@ElverCeballos
5 ай бұрын
Cualesel presio
@HowToDoitright
4 ай бұрын
$100
@JVlalice--
2 ай бұрын
"best to clean when fresh and wet, but when its dry is also a time where it can be cleaned" 💀
Пікірлер: 33