I have the same mower. Having issues with routing the lower drive belt. The one you said needs replacing. Can you show a video or something on how that belt goes around them idler pulleys
@CgAngel96
4 жыл бұрын
How reliable are these mowers?
@lindabradford9591
Жыл бұрын
I have one similar and it takes 2 hands to engage the blade and its still hard to do. Anyway to fix that?
@JohnsonsSmallEngines
Жыл бұрын
If it was like that when the machine is new? Then it is what it is. If the issue just started? I would guess it may be the engagement cable binding up or something the mower deck binding up that is making it difficult to engage. Impossible to diagnose without seeing the machine.
@lindabradford9591
Жыл бұрын
Didn't see you responded. We bought it used so not sure how it should be. It's a 2009 model mower.
@finncampeau4922
6 жыл бұрын
I have a polan with the manual blade engagement. The blades won’t turn off when I put the lever back down. I need help
@wadehuff
6 жыл бұрын
Finn Campeau I had the same problem with a mower last week this video solved the problem kzitem.info/news/bejne/rnyfn66lgneXpG0
@MrRepoman197
3 ай бұрын
I have a similar model. That pto cable is a bitch to re install.
@chrispowell8438
2 жыл бұрын
Mine dies when I ingage my blades it manually
@JohnsonsSmallEngines
2 жыл бұрын
Check to make sure the blades are free to move under the deck, no obstructions or you may have a safety switch issue.
@chrispowell8438
2 жыл бұрын
@@JohnsonsSmallEngines thank you very much
@jefframsay3716
6 жыл бұрын
I have this same mower. I have to hold the lever down to make my blades engage. What could be the problem? I release the handle and it springs back on its own
@JohnsonsSmallEngines
6 жыл бұрын
I would need to see or send me a video to be able to help you with that issue. Sounds very strange. When did the issue start? was it after you did any maintenance?
@aaronmonahan6079
5 жыл бұрын
@@JohnsonsSmallEngines did you guys ever find a solution to this?
@JohnsonsSmallEngines
5 жыл бұрын
@@aaronmonahan6079 The machine was in for a blade engagement cable install. We installed a new cable and put the machine back together. What is your issue with your machine?
@jviews1
Жыл бұрын
MEE TOO same problem. Is it able? blade belt? cannot figure out how and why lever would stay engaged. No cam position. note deck fine and new OEM belt. cable "seems" fine.
@jviews1
Жыл бұрын
ME TOO. MUST HOLD LEVER DOWN TO MOW. Trying pto bearings as only $12 and willing to throw money at it.
Пікірлер: 17