Hey guys, Jim from Import Image Racing here! Welcome back to the channel. In this week’s video, we’re installing the Crawford Performance Overland Series Rear Bumper on our 2018+ Subaru Crosstrek. We'll cover both the easy and hard methods of installation. For the easy method, following Crawford's instructions, we'll show you how to modify the frontmost hole to fit the anchoring hardware. For the hard method, we'll be removing the rear bumper and crash beam to access the frame rails from the back, avoiding the need for special tools like a Dremel.
We start by removing all the plastic push pins in the rear wheel well and the lower perimeter of the bumper using a flathead screwdriver or a pick. Next, we detach the bumper by pulling it slightly to release the clips and then pushing it towards the rear to snap the clips underneath the hatch. Don’t forget to disconnect the parking sensor harness if your vehicle is equipped with one. Then, we remove the crash beam, which is held by three 14mm bolts on each side. After that, we remove the rear-facing grommets and install the provided threaded anchors. Reassembling involves reattaching the crash beam and bumper, ensuring the threaded anchors are secure.
Here are some pro tips: secure the nuts onto the studs before reassembly to prevent losing the anchors in the frame rail. Seek help from a friend or neighbor for the final alignment and tightening of the bumper. For the final adjustments, use the slotted holes to adjust the bumper’s position for perfect fitment, and tighten everything to Crawford's recommended torque of 100 foot-pounds.
FIND IT HERE!
Crawford Overland Series Rear Bumper - 2018-2023 Subaru Crosstrek | B22501:
www.importimageracing.com/pro...
Thank you for joining us for this installation of the Crawford Performance Overland Series Rear Bumper on the 2018+ Subaru Crosstrek. For thousands of parts just like this, plus tons more, be sure to visit importimageracing.com for the best deals on the web and in the world. If you enjoyed this video, please give it a thumbs up, subscribe to our channel, and hit the bell icon to stay updated on all our latest content. See you in the next one!
#CrawfordPerformance #SubaruCrosstrek #ImportImageRacing #CarMods #OverlandSeries #RearBumperInstall
Негізгі бет Автокөліктер мен көлік құралдары Crawford Performance Overland Series Rear Bumper Installation | 2018+ Subaru Crosstrek | B22501
Пікірлер: 1