Excellent video sir! Your thorough explanations have given me the confidence to tackle this project on my 655B.
@justtinkering6054
4 жыл бұрын
I am glad I could help.
@shrillcarder
5 жыл бұрын
Tink mate please keep these brilliant video's coming, I have a 1974 International B165 Drott and I have the exact problem that you have just repaired in this video, you have saved me a heap of head scratching.👏👏👍👍
@justtinkering6054
5 жыл бұрын
I am glad I could help.
@AlphaBobFloridaOverlord
2 жыл бұрын
Outstanding video! Thank you for taking the time to film and edit your work! Good judgement regarding doing what you can accomplish and supplementing with a service truck including the proper tools!
@jeffmckinney4885
3 жыл бұрын
I have watched these videos and read all the posts about how to change these seals. They are very interesting but I can’;ty believe no one has collapsed the adjuster and slid the tracks off the front idler. I have done this with my 175, 125, and a D4C. It is a five minute job and no the tracks do not have to be wore out. It is a 5 minute Job you can do by yourself if you have something to lift the tracks with. You can remove it completely if you want to change idlers or replace rollers. Just lift the tracks off the sprocket. Try this before you take your tracks apart.
@mfmhydro6274
5 жыл бұрын
Love these old Internationals. Did a TD15 today.....One little trick is to take out the fitting, and give it little blast in that hole with a rubber tipped blowgun. It usually blow the puck out to replace the nylon seals.
@kirbymorris2253
3 жыл бұрын
When I was working for a Cat dealer I removed the track adjuster piston with a tipped air nozzle inserted into the hole formerly occupied by the relief valve and used air pressure to blow the piston out.
@zigz0911
4 жыл бұрын
You can get the piston out by using compressed air through the grease hole...
@northrockboy
2 жыл бұрын
Perfect I have to do seal on mine. Thanks for info and videos.
@randallracer
3 жыл бұрын
just got one of these tractors the other day. worked on it today to get it into location. long story. so we cant turn ours because the clutches are screwed. so we had to back it in uphill. got it some way in. got up on a bank n the track slipped off the idler.
@randallracer
3 жыл бұрын
we also have the 4 ton blade on it. and it slid inwards. way before that we noticed the tracks were loose. and way before that we sprayed hydro fluid from an old line. its still not where we need it. gonna try gettin on it next saturday. but im sure this video will help us figure out what we need to do.
@justtinkering6054
3 жыл бұрын
Sounds like you have a lot of work ahead. I hope my videos can help.
@BRIANVANDUYN
5 жыл бұрын
Thanks for the video!
@Geology48
4 жыл бұрын
6
@kevn22
10 ай бұрын
Hahaha quite the portable hydraulic press
@evanpenny348
4 жыл бұрын
Thanks for this vid, but agree that there is a bit too much talking. Also suggest that you mount the camera on a tripod - the picture wobbles all over the place, and this is hard to follow.
@killingoldgrowthsince
4 жыл бұрын
We cut the pin boss with a torch slide the pin in and weld the boss back up. No pin press needed, no beating with hammers. Easy pleasey...
@marksaunders8295
3 жыл бұрын
I usually just pump the piston and rod out with grease.
@Inuktuuk
3 жыл бұрын
Good job!! excellent vid
@BillOtinger
5 жыл бұрын
Thanks Very Good Video
@raymondquave1237
4 жыл бұрын
You Could Of Used A Air Compressor To Blow Out Piston From Inserting hose In Grease Fitting hole
@thaddeustroyer
3 жыл бұрын
Or more grease from the grease gun. Little more to clean up but shoulda pushed it right out.
@kevinleroy2661
3 жыл бұрын
Very good video. Trying to get all the info that I can to replace those seals in a TD8C.
@justtinkering6054
3 жыл бұрын
A piece of advice, if you have a mechanic come to press the pin on one side, go ahead and do the other side too while he’s there. After I did the one side I paid to have my machine hauled to my project site. After a few hours of work, the other side blew out.
@cristianl.347
Жыл бұрын
Exact Same thing happened to me, Replaced the seals on one side. Moved my machine to a job site and blew the seal on the other side. Might as well attack both of them while you’re at it. Great Video!
@rigbymordecai772
2 жыл бұрын
Need help, one track will move but the other side won't
@BRIANVANDUYN
5 жыл бұрын
How much was it to press the pin out and back in?
@justtinkering6054
5 жыл бұрын
It was a family friend that did it on this video. He was able to get me a deal. I actually had the other side go out a few weeks after I fixed this side. I didn't want to bother him again so I called a heavy equipment mechanic that I had used in the past to rebuild the Pilot Control Valve on this same machine. It's been a few months, but I think he quoted me $350 to come out with his press and do all the labor as long as I got him the seal kit. I ended up selling the machine with the track tensioner blown. The new buyers were aware of the issue. I was actually waiting on the seal kit when they inspected the machine. The seal kit came in the day before I shipped the machine to them. I gave them the seal kit when they took delivery of the machine. They were going to have their own mechanic fix it.
@indiankite7358
2 жыл бұрын
I have to do the same job on my cat D5!
@daveprototype6079
4 жыл бұрын
Nice work New subscriber Cheers
@justtinkering6054
4 жыл бұрын
I'm glad you liked the video.
@dieselwrench3621
3 жыл бұрын
Do you still own this track loader? If so how’s it doing? If you still own it post some more videos of it👍
@sighpocket5
4 жыл бұрын
Nice!!!!(very good info!!!)
@justtinkering6054
4 жыл бұрын
Sigh Pocket I’m glad I could help.
@ggem8125
4 жыл бұрын
New be great video
@simushisimushi9260
5 жыл бұрын
hello, what makes the track lose power on one side?
@justtinkering6054
5 жыл бұрын
The plastic seal breaks down and allows the grease to escape. Once the grease can escape, there is no pressure on the track.
@davidwortham466
4 жыл бұрын
It's been awhile but maybe drive clutches
@peterrader5520
2 жыл бұрын
Is there a retainer on the end of the track pin?
@justtinkering6054
2 жыл бұрын
No
@peterrader5520
2 жыл бұрын
Mine looks like there is a washer pressed on the outside, looks like the washers when you show the pin about 1:34
@peterrader5520
2 жыл бұрын
At 1:27 looks like retainers looks like that is what stopping mine from moving,
@celtic1522
4 жыл бұрын
Did the master pin not have link washers?
@justtinkering6054
4 жыл бұрын
I'm not sure what link washers are. There were some kind of washers between the links. I took them out cleaned them and reinstalled them.
@lheejannacorda7188
6 жыл бұрын
@just tinkering,,,,,where can i find the the grease fitting for komatsu d85
@justtinkering6054
6 жыл бұрын
The grease fitting on mine was a regular old fitting that I bought in a kit from my local tractor/farm store. The grease seal came from H Finney. I ordered that online.
@harrytaylor6854
4 жыл бұрын
cool
@indianoladave
4 жыл бұрын
How much for the Anvil
@lewisadkison
4 жыл бұрын
Can steering brakes on 450 J D dozer be bled
@justtinkering6054
4 жыл бұрын
Lewis Adkison sorry, I am not familiar with that model.
@2024s_truth-speaker
3 жыл бұрын
Scares me seeing u having that bucket up like that! Seen man do that b4 and hose busted just sitting there and that bitch came down so quick you would of never gotten out from under it in time.
@justtinkering6054
3 жыл бұрын
I might not have shown it in this video, but I had the loader support brace on the left side lift cylinder. I appreciate your concern. It's good to bring that up.
@10us101
4 жыл бұрын
get a tri pod and then show the camera rather than showing everything with the camera
@lifeingeneral9111
4 жыл бұрын
had you bought a new arm you would have been done before you turned the camera on
@earlhafer8508
4 жыл бұрын
You talked too much! Show me how you do it.
@rico334
4 жыл бұрын
Dude.... Next time don't be a tight wad and just take that thing to the mechanics shop.... They have all the proper tools, not that cheap Harbor Freight crap, they know how to do it all but the big thing is, you don't have to fart with it at all. And you won't have that huge spot of grease in your driveway that will ruin the environment..........
@mohabatkhanmalak1161
4 жыл бұрын
Mechanics, technicians and engineers generally do not outsource their projects. If I had a million bucks, I would also do the job myself, its fun and enhancing. So get off your high horse and welcome to the real world..!!
@rico334
4 жыл бұрын
@@mohabatkhanmalak1161 Well right there is your problem and is why you don't have a million bucks, you waste all your time working on stuff when you could be letting the professionals work on it while you are using your time to make money...........
@godsdozer
2 жыл бұрын
@@rico334 your comments are ruining the environment. , get a life
Пікірлер: 61