Gonna definitely do this bought a Bambu lab and ender 3v2 has been collecting dust this is a great idea!
@Soghoezl
Жыл бұрын
You installed the bracket incorrectly. the bracket is hung under the upper rollers and fixed with a screw from below. but otherwise a nice and informative video. Greetings😊
@Keepitunknown123-j2g
Жыл бұрын
Hello can u please help me set up my 10 watt laser module in ender 3 s1 pro
@Soghoezl
Жыл бұрын
@@Keepitunknown123-j2g no, sorry haven't done it by myself on a Ender 3 S1...😉
@LokiCustomz
9 ай бұрын
For anyone watching this that dont want to do all the extra cutting and drilling, it is way simpler than this. the mount he has is made to mouth WITH the extruder still on the printer. he has it installed wrong. he has it turn the wrong way. it sits along the the top railing under the back side and clamps in. then tighten the screw under the bottom and it will not move at all!
@gdub8409
7 ай бұрын
I just installed a laser on my Sovol SV-06 plus but havent had a change to use it. How does the machine know to use the laser instead of the hot end when laser negraving? I was 3d printing something and it 3d printed and lasered my build plate when it wasnt suppose to . thanks
@malaythakkar8772
5 ай бұрын
@@gdub8409you have to switch the cables out evyertime
@The.diydad
9 ай бұрын
READ BEFORE INSTALL. Do not go cutting and drilling the bracket! It comes perfectly ready for install even with the extruder left on. I will give him some slack though, the instruction booklet doesn't do a great job showing how the bracket goes on.
@williamsturgess9191
Жыл бұрын
Could you possibly add a link to the honeycomb bed for me? I have been looking for one for my Ender 3 S1 pro but can’t find one. Thanks
@AZREDFERN
Жыл бұрын
I don't like that shield. I feel like it should be hovering 1mm above the surface with no peep hole, and a corridor for the air to get out, but no direct line of sight.
@EvPv
Жыл бұрын
I feel like drilling out the two threaded holes was a much easier fix
@grahamwhitehead5629
Жыл бұрын
good idea, but what a mess of wiring, think they need to sort that out
@tophlaw4274
Жыл бұрын
this is very informative. thank you so much for this as it will help inform my choice for getting one for my Ender 3 ;)
@dineshraghuwanshi5359
Жыл бұрын
can we make PCBs using this...
@brentscoggins8084
Жыл бұрын
this is what i want to know!
@lvanek2011
Жыл бұрын
Have a link to that honeycomb bed?
@user-du2of3lh1g
Жыл бұрын
I actually like the first laser print lol
@u2bist
Жыл бұрын
Excellent video, very helpful!
@mr_geometrikz
8 ай бұрын
What type of acrylic you used for cutting? Extruded or casted? Thanks for helping. 😊
@rioghantorrin3968
11 ай бұрын
"Im not going to install the bracket properly..." "Theres too much wobble in the bracket so I have to cut it up and drill" Maybe just install the bracket properly.
@yonphys
Жыл бұрын
Thanks for this awesome video, I have a question, is 10w enough power to engrave in acrilic material for acrilic light lamp? Thanks
@malaythakkar8772
5 ай бұрын
Yes
@BigRift
7 ай бұрын
The bracket is installed wrong.
@crossthreadaeroindustries8554
Жыл бұрын
Great share, excellent.
@rhalphaugusto
Жыл бұрын
N I C E
@WubbinDubbin
Жыл бұрын
Please can I know the link for the honeycomb bed, I’ve searched online for hours for a 200mmx200mm honeycomb bed but I can’t find it anywhere, none of the creality stores in any countries have this, please reply.
@TwistedSix85
8 ай бұрын
What printer do you have? If it’s this one you should be looking for a 235x235. Your print volume is 200x200 but the actual bed size is 235x235.
@richardmolano5538
Жыл бұрын
Instead of my laptop/iPad can I use it with my iPhone?
@مراد-ش8ط
Жыл бұрын
Amezing stuff and great vid. Thanks.
@escrabio123
3 ай бұрын
which material can you cut with this laser?
@100xminimum8
Жыл бұрын
ik this is a longshot, My Engraver Got burnt a while back while cutting a bunch of phone stands in wood, the wood caught on fire... Anyways I got all the parts I need besides the red Magnetic Lense/Sheild that attaches to the bottom of the laser module, I want to 3d print one but need to know the dimensions, more specifically just the height of the red shield, I can measure the laser module for the with, but cannot just guess the height because the beam needs to be focused. If anybody can measure the height of the red Sheild with a caliper and tell me how many mm it is i would appreciate it more than you could imagine!!
@TDO17775
9 ай бұрын
Just happened to have both the shield and calipers within arms reach lol. Just basic ass calipers, but I got 38mm height for my shield
@parsec3d
10 ай бұрын
Do you know if the rotary module for the other creality engravers can be used with this adapter?
@MyTechFun
10 ай бұрын
Yes, they just replace the Y stepper motor. You just have to plug cable to rotary unit.
@manuguerin9657
Жыл бұрын
Good morning. Thank you for your sharing. I am about to order the 10w laser. Is it delivered directly with the 3 boxes (laser + honey bed + compressor) or do I have to order them in addition? I can't find it on their site...
@MyTechFun
Жыл бұрын
Those are sold separatly.
@TommasoDiDonatophoto
9 ай бұрын
Thank you very much for the video! Just an information: did you find air assistance useful in entgraving steel? or is it "mandatory" only for cutting? Thank you!
@MyTechFun
9 ай бұрын
Air assist I use ONLY for cutting wood.
@TommasoDiDonatophoto
9 ай бұрын
@@MyTechFun thanks sooo much!
@ricardogarciasoria6026
8 ай бұрын
Does anyone know why the laser stays on without me giving instructions?
@CadAxe3D
Жыл бұрын
Well done
@lecorpsduchris
Жыл бұрын
Hello, where buy laser honey bed? I'm looking on internet and I don't see the right size. Thanks ni advanced
@alisonklein_ergo
Жыл бұрын
I'm having trouble using the laser, my ender-3-v2 keeps going down (z axis doesn't lock), could someone help me?
@Berstain_
Жыл бұрын
Can these laser cut EVA foam or will it burn it? im planning on using my Ender 3 to create pattern for my cosplay prop
@Rodamyot
Жыл бұрын
Where did you get that honeycomb bed (230x230) there's only a 300x300 on creality site ????
@MyTechFun
Жыл бұрын
This one was in the review package, but I don't know where is it in webshop.
@Rodamyot
Жыл бұрын
@@MyTechFun OK they ship it to you ? I'm going to ask them if it's available. Do you mind me mentioning you as reference ?
@JaimeGonzalez-tt4kk
Жыл бұрын
I just bought one at Aliexpress
@Shakamui62
Жыл бұрын
Thank you and great job on this video!!! I currently have an Ender-3 S1 and am starting out with a 10W laser module. I followed your advice, printed your shim with my Saturn S but I could use a little help on the setup whether on LightBurn or LaserGRBL as I am getting beeps and error messages. Would it be possible to chat to see this together? Thanks for your feedback.
@jamesbonnici7907
Жыл бұрын
I can't find the 10w laser on their website
@100xminimum8
Жыл бұрын
ik this is a longshot, My Engraver Got burnt a while back while cutting a bunch of phone stands in wood, the wood caught on fire... Anyways I got all the parts I need besides the red Magnetic Lense/Sheild that attaches to the bottom of the laser module, I want to 3d print one but need to know the dimensions, more specifically just the height of the red shield, I can measure the laser module for the with, but cannot just guess the height because the beam needs to be focused. If anybody can measure the height of the red Sheild with a caliper and tell me how many mm it is i would appreciate it more than you could imagine!!
@Daepilin
Жыл бұрын
yeah no... lasers on an open machine in a normal, non actively ventilated room seems like a really bad idea...
@dangerous8333
Жыл бұрын
😆 This is a demonstration.
@Daepilin
Жыл бұрын
@@dangerous8333 and it's advertised to people who might not know better and use it just like this...
@TwistedSix85
8 ай бұрын
Why would you make a video like this and not do your research enough to even mount the laser bracket the right way?
@Centaurin
Жыл бұрын
Was the honeycomb grid from the 10W/5W Falcon Engraver Accessory Kit, looking at getting it but it shows no dimensions, don't want to get it then it doesn't fit the bed
@alandh5400
6 ай бұрын
235mm X 235mm, AliExpress has the Creality one.
@HerraHazar
8 ай бұрын
How do you make sure that the engraving is positioned on the right spot of the material?
@MyTechFun
8 ай бұрын
Boundary check in lasergrbl or framing in lightburn
@mahendradhungel8011
Жыл бұрын
I wouldn't use laser on an open ended printer many blinding issues can happen. Fires are also possible.
@dangerous8333
Жыл бұрын
He knows.
@JaimeGonzalez-tt4kk
Жыл бұрын
I use mine on a table in my backyard. Plenty of air and low risk of fire.
@seiwat8564
Жыл бұрын
Can i just buy the engrave module without the control box kit? Did the machine still work?
@JaimeGonzalez-tt4kk
Жыл бұрын
No. The CV module can only manage 5W from the services port.
@mrKitels
2 ай бұрын
спасибо за обзор
@MegaRockfever
7 ай бұрын
does it support Ender v3 KE model?
@julienlessire18
5 ай бұрын
I looking also for the same 3D printer model but I don't know if it's compatible. do you finally try this ?
@garydemarco2454
Жыл бұрын
I can't find that honeycomb bed anywhere. Can you link where you got it. Creality doesn't have it on there site.
@agata7976
Жыл бұрын
On the website in the description it can be found as "10W/5W Falcon Engraver Accessory Kit". I got it too :)
@agata7976
Жыл бұрын
update: it doesn't fit ender 3 S1, lol
@Djkommode
2 ай бұрын
Can I use any air assist with this unit?
@MyTechFun
2 ай бұрын
"any" is too wide world, but yes, you can use many other air assist pumps, like fish tank air pump etc.
@Djkommode
2 ай бұрын
@@MyTechFun :))) that is true. Reason I asked is because my mother in law found a elegoo air assist pump with no tube… I’m going to install this creality laser module for my ender 3. I didn’t find anything about different pushing more or less air so I had to ask.
@ryannnn_nelson
9 ай бұрын
you know what is a better material than both stainless steel and aluminum?.. eyeballs. 👌😆
@KayDee73
Жыл бұрын
Wow. Anyone who has used a laser cutter with a LID will tell you how important it is to have effective extraction. This is just downright dangerous.
@RYTHMICRIOT
Жыл бұрын
Plenty of test mules in this community to go out and make all the mistakes that drive improvements for the rest of us who wait for the tech become more usable.
@pauldowell6925
9 ай бұрын
Do you know if they make a rotary roller for the ender s1 pro?
@MyTechFun
9 ай бұрын
You can use rotary roller from Atomstack and connect it here to Y axis cable. With that roller you will get different cables for compatibility with other units
@gordon1201
10 ай бұрын
Can you engrave PCBs?
@MyTechFun
10 ай бұрын
Not with this laser directly, but you can engrave some cover surface and finish with etching or similar.
@dylan8442
5 ай бұрын
8:08 "ah the exact reason I'm here I wonder how he'll fix this" Mfw this mf whips out the damned drill press-_-
@GreenAppelPie
Жыл бұрын
I have little faith in creality accessories after trying their sonic pad. If anything I’d just buy a standalone unit
@sibrend2820
Жыл бұрын
I have also bought this the 10w laser And i made an bracket to attach the motherboard box to my ender 3v2 neo printer I also routed the cables together with the ones from the 3d printer Now i just have to undo the z axis motor and limit switch an plug in the ones from the laser that i gave a red zip tie i also have to do it for my y axis motor and limit switch Then attach the laser plug in the cable Plug in power to the motherboard and im done it takes max 2 minutes . And it works exxelent i can engrave everything .metal,glass,plastic,wood stone,leather,everything .with the proper settings They also give manuals on the sd card like with any creality printer where you can find an diagram for what speed and power you need to set the laser to for engraving all kinds of matterial and also an diagram for cutting some matterials I am pretty happy with it and the air assist u only need it with wood and different matterial than may burn a little .
Пікірлер: 83