New Channel: www.youtube.com/@Just_Print Ender 3 S1 Pro: geni.us/L1ePy Recommended: geni.us/JustVlads
@devilik3692
Жыл бұрын
high end looking piece while looking at creality extruder 🤡
@JPTV980
7 ай бұрын
What size was that rocket 🚀 ship
@janstrydom5565
6 ай бұрын
Awesome video. Do you have a 1 year later review of this printer?
@SAMZIRRA
8 ай бұрын
No exaggeration, this is the best, easiest to understand build video for this printer I have found. Seriously, thank you so much for making this. I just ordered mine today and needed this video for help.
@FamilyFlippers
Жыл бұрын
You explained this thing as if you invented it. Amazing. We would have never known how to set this up had it not been for this amazing explanation video. Thank you so much.
@EdGodoyPlana
2 жыл бұрын
I purchased this as my second printer and love it. My first printer was the Ender 3v2 and I have significantly upgraded it. This Ender 3S1 Pro is much easier to assemble and has almost all the upgrades I did to the Ender 3V2. This is a better printer than the 3v2 even after all the upgrades. After a few month now of using the PEI bed I found that the bed adhesion was excellent for the first 45 to 60 days of use. After two month of use the PEI bed does not stick as well as it did at the beginning no matter how well I clean it. I now use some washable glue for some prints to get the bed to stick. I simply love this Ender 3S1 pro ! It’s a fabulous printer! I bought a Raspberry Pi and an webcam to install on this printer. The Ender 3V2 I already installed the Raspberry pi and the webcam. I now need to install the new raspberry pi and the webcam on the 3S1 Pro . But I need to figure out how to set up the second printer with the raspberry pi and Octoprint. Your review of this printer is excellent! When I purchased my Ender 3V2 I followed your KZitem video to put it together. Have you installed multiple 3d printers and webcam to use them simultaneously with Octoprint and raspberry pi ? Thanks again for your great KZitem videos!
@JustTechGuyThings
2 жыл бұрын
If you don't wanna buy a raspberry pi and camera, you can use an old Android with Octoprint 4 Android.
@EdGodoyPlana
2 жыл бұрын
@@JustTechGuyThings I got the raspberry pi and a webcam already. I just need to install it on the second printer ( Ender 3S1 Pro) .
@ladykatepyro
2 жыл бұрын
For the PEI bed (and for glass beds) I use Aqua Net. I wipe it down after every print with 90% rubbing alcohol. It retains its stickiness like it did when new. When hot, it sticks. When cool it releases. Don't use Acetone on PEI. I just got my S1 and it is working well right now -- no extra sticky required. This was true for my Prusa and I graduated to alcohol after a month or so of using it.
@rzk2f875
2 жыл бұрын
@@EdGodoyPlana where did you get the pi from? It's out of stock or marked up everywhere I have looked.
@EdGodoyPlana
2 жыл бұрын
@@rzk2f875 I got it at Best Buy but I had to pay $ 135 for the CanaKit - Raspberry Pi 4 Starter MAX Kit 4GB RAM, 64gb card etc! Very expensive!
@barbpaz3636
Жыл бұрын
Thank you so much! I have never used a 3D printer before and you helped me set it up and do my very first print! I am a miniaturist and this is going to be perfect for my needs! Thank you for explaining it all in terms even a beginner like me could understand! Great job!
@keenaheaton8853
2 жыл бұрын
The camera work here is absolutely amazing
@daviddawkins2829
6 ай бұрын
Tripod. Everyone should use one. The audio is great as well. Lav? Shotgun?
@3Dgifts
2 жыл бұрын
This is the best video I have seen for setting up the Ender 3 S1 Pro. Other videos I viewed lacked the detail, for example, when performing bed leveling and adjusting the a axis they did not show the screen or explain the topic accurately. Great job.
@parad0cks
2 жыл бұрын
18 months ago, I watched your review of the Ender 3 Pro, it gave me the confidence I needed to start 3D printing. I purchased the printer, set it up and I've been growing in confidence ever since. With that in mind, I always look forward to you reviews on 3D printers, I've been excited to see you review this one in particular. Many thanks for the inspiration and the great reviews, they have probably helped a lot of people :)
@ElGatoNegroFPV
10 ай бұрын
The manufacturer should include the link to this video into the manual, thanks for taking your time doing this tutorial, you’ve made it easy.
@Flipmeister
2 жыл бұрын
The shots of the printer in the begin of the video are super nice and well made.
@AusSkiller
Жыл бұрын
Thank you for this video, I used it to help me set up my Ender-3 S1 Pro and the first print was absolutely perfect the first layer went down just right, adhered perfectly and popped off easily. I doubt it would have gone as well as it did if I hadn't watched this video and adjusted it as suggested, I found most of the rollers were extremely tight and you could feel the axes get stuck in the positions they shipped in (the rollers might have developed some flat spots from the pressure over time), but after loosening them per your instructions (and making sure to turn them all random amounts so that the potentially flat bits don't all line up at the same spot) it moved SO much smoother.
@bdshack404
2 ай бұрын
Great video, just got my first printer, was absolutely crapping my pants until I watched this, now I'm excited 👌
@muttbone01
Жыл бұрын
That sticker on the screen to check voltage.....single most important in-your-face thing I've seen on Chinesium products. WELL done.
@Fpfpicsandvids
Жыл бұрын
Thank you, i had issues levelling the bed at first but i eventually figured it out. essentially i manual level first, raise the z axis 1.0 at a time until close enough, then spun the physical rings under the table with a paper touch, did the automatic and then a manual test again. I ended up going 3.5 on the z axis in the end but I'm glad I went bit by bit. nearly broke my nozzle by plunging it into the table. but not enough to cause damage.
@ShaggyShaggums
Жыл бұрын
I just got my first 3D printer, an Ender S1 Pro today and I followed your setup guide and PLA settings and my first print came out looking amazing. I printed out a Picoboot holder for the GameCube by HUVUL. Your guide made my first print easy. The only issue I had with my setup and had to repeat was the Auto level. I had to do the auto level twice because there was such a large gap in the center of the bed and I manually compensated all the way down to -5.00 and the extruder never moved. So I zero it out and ran a second auto level and this time I was able to get a manual center level at -3.40 but it prints beautifully. Thank you so much for your video.
@anirban17aug
Жыл бұрын
I have the same issue. Can step out the details on how you rectified it. Also, the manual levelling lever are almost on the looser end
@lorenzh8868
Жыл бұрын
kzitem.info/news/bejne/qKOeqI2FfpRepaQ I found this video, thinking of buying the printer myself. Does this help?
@ShaggyShaggums
Жыл бұрын
@@anirban17aug I'm new to this and I've been printing nice quality prints but what I did that worked for me was to tighten all 4 levers/wheels and then I manually leveled the bed loosening the wheels as you go and using a piece of paper where the nozzle slightly grabs the paper like in the video and afterwards I did the auto leveling and everything came out fine. My level is -3.40 but I have no issues and if you are concerned about that, there is some part you can buy to put on under your bed to push it up but honestly it works fine.
@anirban17aug
Жыл бұрын
@@ShaggyShaggums thanks a lot for your response. I was able to level it and z axis is set at 2.70. Everthing seems to work now.
@Gorzor9
Жыл бұрын
I appreciate you walking through cura settings, have come back here several times just for that.
@ladykatepyro
2 жыл бұрын
Thanks. I got the s1 and followed your video. One thing I found is that I have to be patient. Sometimes it just takes a few seconds to be ready to go on. Getting impatient and pressing a selection more than once often causes it to lock up and I have to reboot. This is true in leveling especially. I also noted that when I pre-heat the PLA sometimes it will think I am printing and I have to stop it and start over. Weird. However, overall it appears to be working fine. I love the new filament feed. Much better than the pro and V2. Overall, I am looking forward to putting some miles on it. Your videos for assembling these are SOOoooo much easier than trying to figure out what the manual wants. Especially when it comes to correct things like a loose bed. Just love them.
@Fortniteslayer2000
8 ай бұрын
Mate my printer was broken and you basically just fixed it for me thank so much mate
@dabruuzer
2 жыл бұрын
Fantastic video, and so helpful. Just about to choose my 1st printer, and this has been invaluable to. This model is now my top choice, out of the three I have narrowed it down to. Thanks!
@sakelaine2953
Жыл бұрын
Have you gotten it yet?
@mrburge232
Жыл бұрын
lessgo, same
@Mr.Thermistor7228
Жыл бұрын
im kinda mad at all the new people being able to jump straight into a direct drive printer. you all have it so easy. that being said im also glad ive gone through the trials of a bowden tube extruded setup, its made me a better printer than you ;]
@Juice_knuckle
6 ай бұрын
Just bought this after having an ender 3 and this video just got saved to my Playlist lol
@pyromantic5709
Жыл бұрын
Super helpful, couldn’t find where the end stop plugged in, thanks a ton
@kaziabdulbaset3543
2 жыл бұрын
This really looks and feels like a finished Ender series product. Easy installation than ever and pretty good prints at stock settings.
@sephirotradmin2016
6 ай бұрын
This is by faaaaaar the best tutorial on this printer!! Thank you!
@811970samson
9 ай бұрын
I followed your video for my ender max neo...my first prints were perfect! Just got the s1 pro, and your video was my first stop! Thanks!
@apuwithit9625
2 ай бұрын
Which one better ender max neo or s1 pro?
@jakewright7804
Жыл бұрын
I want to thank you for your video. All of the quirks you experienced were not present in my unit, i have a theory that it is likely due to fixes based on reviews like yours. It went together fast and easy thanks to your walk through. My first 2 prints went off without a hitch.
@karencollins7076
8 ай бұрын
This video is great and easy to follow ,I don’t have my printer yet but this makes it clear what I need to do.
@inovtechstemcenter
Жыл бұрын
Hey guys! If you are in Europe or Africa maintain the 230 V. Don’t change it to 115V otherwise you’d ruin your printer.
@brato03
7 ай бұрын
Can i put 230v and start it
@inovtechstemcenter
7 ай бұрын
@@brato03 Use 230V only if you’re in Europe or Africa.
@brato03
7 ай бұрын
Im in europe but i fcked it up il buy another psu
@rafa_el9638
7 ай бұрын
@@inovtechstemcenterSA too, I'm from Brazil. Here we use 220V.
@batterynerd8779
6 ай бұрын
Use 230 volt if you are in another country than the us and japan you meant to say? :)
@michaelbehrens5143
9 ай бұрын
Very Helpful - I wish the provided docs said all this!
@okiedoak201
Жыл бұрын
What a Awesome video....very detailed...I must have watched this at least 10 times....and because of this video I bought a creality Ender 3 S1 pro...just finished with assembly...well done and thank you very much
@StuntDoubleFPV
Жыл бұрын
Big thank you. All the rollers on my machine were way too tight and I would have missed this if it wasn't for your vid.
@juliepowell2572
10 ай бұрын
I just got my new printer and would still be tearing my hair out if not for your vid! Thanks so much.
@blackbeardgamer5909
2 жыл бұрын
Dude thank you for the clear video! Made setting up the printer so much easier
@claytonnlambert
Жыл бұрын
Thanks! Used your video to setup my new printer and first print was flawless. My print bed was super loose out of the box and I also had extremely tight belts.
@pinksocksinsandals8016
Жыл бұрын
Thank you very very much for the video. My first 3d printer set up in an hour for a newbie. Well made with all the informations and great quality
@pijanysamuraj
Жыл бұрын
Everytime I want to check new printer I'm checking vlads Chanel, He seems genuine
@PranishBhaskaran
Ай бұрын
Brilliant, you made it look so easy. I am excited now to go for one.
@madderall_dot_com
Жыл бұрын
So it comes with a piece of paper that has text on both sides and it's of high quality on top of that? Wow, how exciting!
@glittalogik
Жыл бұрын
Assembled my printer last night, and this video covered everything I needed to know about the manual levelling steps and Cura setup. I screwed up my first 3DBenchy by leaving spiralizing on but I'll have another crack at it tomorrow :)
@lfaitas
2 жыл бұрын
Fantastic video .. well done! First time owner of a 3d printer so i had no idea how to setup and print on the Ender 3 S1 Pro and so far had mostly print fales due to lack of experience. On the internet could not find any usefull videos on how to setup the new printer and the shop where i bought it from could not help by phone. Friends had other older or more simple printers and then again where no help. This video takes you step by step with the first time setup of this printer and after that i managed to finish my first succesfull complicated print! The printers user manual does not tell you anything about all these asymmetric wheels which need setup and my printer was not ready to print from the box.. the hotbed was moving all over the place so i needed to tighten the wheels underneath and the print head base loose so when i printed it was gong up and down! thank you very much again!
@ftw2011fyi
2 жыл бұрын
Your video skills have improved like crazy! Wishing your channel lots of success
@ladyenyo
Жыл бұрын
THANK YOU SO MUCH for this video, this was fantastic tips and teaching how to set this up correctly!
@jm-po6bs
2 жыл бұрын
I just bought one of these as my first 3d printer. Very informative video, thank you. I will be watching more from you.
@pagemaster4568
Жыл бұрын
Hey yall if you're in North America Most residential outlets set it to 115v had to do some researching on what to set the power supply too !
@jasondeschene8422
15 күн бұрын
This was driving me up a wall thank you
@hendrikjbboss9973
Жыл бұрын
At the point in Cura where you inserted the G29 code you did it incorrectly and way too quickly. You just added 029 to the G28 code as follows which is incorrect: G28029 ; It should have been G28 ; THEN ON THE NEXT LINE G29 ; In actual fact G29 is not needed at all if you use M420 S1 ; in the next line. Eg. G28 ; M420 S1 ;
@JT-st6ui
2 жыл бұрын
Excellent video really clear to follow thank you. I just wanted add to my coment, my first printer was Prusa mk3. The new Creality Pro is worth every penny, the full metal head is perfect. I print mainly in Flex 98 and softer TPU the feed and hotend just work amazing. This my new go to printer solid build and amazing prints, just everything about it has been so well designed and thought out. I am trying to find faults but so far none, great job Creality
@Hanzi2u
2 жыл бұрын
Thanks for your insight!
@MsSamoistina
10 ай бұрын
Thank you so much! My school just got this printer, and, thanks to You, it's almost workinkg! I did not level it well (y) but hopping tomorow will be better day for me.
@marsilt
8 ай бұрын
Much better intro than Creality has for this printer. Thumb up!
@raymondshell8579
Жыл бұрын
thanks for the info... I'm a noob here and this bed leveling part fixed my issues with prints not sticking..
@williamjansen2204
Жыл бұрын
Another fantastic setup vid. This is the second of your set up vids I've use to get my printer up and running with zero issues. Thanks for this!
@f40carz93
Жыл бұрын
Thank you so much! You helped me out a lot with the setup of my ender 3 and you made things a lot easier!
@elvispresley6238
2 жыл бұрын
Thanks for the video, well done. One extremely important step that I didn't see (may have missed it but worth repeating), check the voltage selector switch on the back of the machine. Mine was set to 230v, it was purchased in US so you'd think they would have set this correctly for you... but they didn't. Remove the sticker and set it to 120v if you live in US.
@JayToTheHonest
2 жыл бұрын
As seen @ 20:34
@EvilMetalGod
Жыл бұрын
Wow...the best video about this printer i've come across..man ur giving ur best..i like it so much cuz im gonna buy this printer...u deserve a sub
@outlet6989
Жыл бұрын
You are a natural-born teacher. Your video was probably the best instructional videos I have watched on KZitem. I've been considering buying a 3D printer for a long time. My big hold-back is that they need a file in order to print. I have items with broken parts that I need to reproduce using a 3D printer. Earlier today I watched a video of a small 3D scanner. I thought I had my answer with the 3D scanner and a 3D printer. Would it be feasible to use a 3D scanner and produce a file that a 3D printer could use? Any assistance would be most appreciated.
@Beestieboy1
Жыл бұрын
What a well done video! I was hoping to find a nice walkthrough on my first filament printer setup and this was so perfect! I have never been as impressed with an intro as I was with this one. This was so easy to follow and very thorough. Just had to comment to say thanks!
@AlliDelta
Жыл бұрын
Another reviewer had the same issue with the spiralise mode and he discovered that it is due to the write speed of the memory card. With a quality SD card with a faster write speed this issue goes away.
@SoapMx81
Жыл бұрын
Thank you so much for this, much better than reading the instructions 😁
@Shadowclaw1113
Жыл бұрын
Just followed this video to set up my printer and currently printing the default rabbit. Great video btw and you've earned yourself a new sub!
@josephjolly1957
2 жыл бұрын
Thanks for the review.
@muttbone01
Жыл бұрын
It might be a minor thing in my mind, having used Creality printers for years, but I LOVE the new strain-relief bed cable. That should have been a feature from the GET-GO, imo. Well done.
@TylerFalwell
Жыл бұрын
THANK YOU! I've been avoiding 3D printers up to this point because I really didn't want to put the time into the learning curve. Now they've advanced to the point where there isn't too much and your video gave me the confidence to do it....and I did. Rabbit is printing now! Thank you!
@Mr.Thermistor7228
Жыл бұрын
yea i wouldnt say that there isnt too much to learn yourself. every 3d printer is extremely sensitive to anything you do to it and you need to have a good understanding of the mechanics of 3d printing to be able to set one up yourself and get accurate prints successfully
@gruffnutz
Жыл бұрын
I'm not convinced this is a set and forget, plug and play, no smoke out the ears, never inducing furious wrenching of one's hair type of 3D printer and don't know any of these budget open frame dealies are. I used to own an enclosed printer which happily kept the user out of the environment, levelling the bed, making a coffee while you waited, even told you what sort of filament you had inserted into the inbuilt spool. I had more hair and it printed okay too, but was a lot more pricey for what you got than an ENder which i greatly prefer. I think to have fun printing you inevitably get tired of white PLA and once you branch out to printing PETG, carbon fibers, then metal and finally reels of titanium infused granite, the problems start. HOwever, most of them are manageable and on balance between attacking the printer with an axe in frustration and rewarding tweaking these have it about right.
@TylerFalwell
Жыл бұрын
@@Mr.Thermistor7228 For sure, but if that fear keeps you from doing it, you never will. This video helps the novice get introduced to 3D printing. I've only been at it for a week now and have plenty of spaghetti prints, but without someone like Vlad breaking down how to get started I never would have ventured out to learn all of in's and outs of Cura, etc.
@drakonis271
Жыл бұрын
Thank you for your videos they are very well made and everything is explained perfectly.
@blakelewis5204
2 жыл бұрын
Thank you man. I followed your video to help me set up my printer. Much appreciated!
@MujaChip
Жыл бұрын
You do a wonderful job on reviewing products
@magdalenamilicevic6608
3 ай бұрын
Thank you so much. I just made my first rabbit. :)
@Bob1942ful
8 ай бұрын
Excellent video. Provided exactly what a novice like me needed. From setup to first print.
@kriswingert1662
Жыл бұрын
@ 14:39, I have this printer and the label on the cable is to be inserted in the bracket so it can be pulled out again if you need to. Also, the cable plug ins on the left side, put the stepper motor one in LAST so you cab push the other 2 in front of it towards the left side edge to keep them away from the bed.
@NETBotic
Жыл бұрын
Never thought about heating bed before manual leveling. Great idea.
@kyledarrenhanson
Жыл бұрын
Excellent video. I just ordered this printer and is my first so your easy yet detailed video is greatly appreciated!
@peter6014
Жыл бұрын
the s1 is great printer, however this one was definitely setup by the company before hand knowing it was going to be in a video. I've never seen one come with the z offset already set to something other than 0. still a great printer and the setup isn't all that hard even with it not being preset, only thing I can say is mine is fairly close to the max z offset to get good results which is a bit concerning
@pvtryan
Жыл бұрын
Thinking about upgrading to this from my Ender 3 Pro
@hendrikjbboss9973
Жыл бұрын
A good video up to 30:51. From there you actually fell of the bus until you started printing. You should have made everything clear on the use of the interface. Just saying "you probably cannot see the screen......" just doesn't cut it. You are using an old version of the Cura slicer that needs more inputs than Cura 5.1.1. BTW which version of Cura did you use for this video? 🤔
@Sysshad
2 жыл бұрын
Your G28 G29 code is faulty. They should be on a separate line otherwise the G29 is ignored. That said, you dont have run G29 on every print, i use the menus calibration instead and always only have G28 in my Start GCode
@Drumaier
Жыл бұрын
Yes I was unlucky enough as to follow this instruction for a week or something thinking the g29 was doing something in my ignorance. I thought it was calling out the last saved mesh as later on I learnt the m420 s1 was doing. He should be putting some disclaimer in the video by now, I see several people commenting about this. THe G29 needs to be in a different line.
@ashm2266
Жыл бұрын
thank you for this video, so helpful in getting the leveling figured out.
@wyattstegall4940
Жыл бұрын
Thank you so much I was having so a hard time for the first week of having this printer to get it to level. Every time I printed it would be off level turns out I just didn't level it manually 4 times in a row to get the auto level compensation to work properly. Thank you
@impactza3231
Жыл бұрын
Most helpful video ive ever seen in my life. Thank you for this!
@earios53
Жыл бұрын
Thanks for your video, you helped me to build and configure with my first printer!! Cheers!!
@bigboomer1013
Жыл бұрын
To avoid stringing, your fillament need to be dry. Like it needs to avoid humidity. Have a chamber for your fillament with silica beads. You probably should also have a tube as well so it won't get exposed to humidity as it's going through the feeder.
@flubbernugget888888
Жыл бұрын
Pla ain’t that big of a deal unless your in the swamp
@HydraHunterGamingHHG
Жыл бұрын
@@flubbernugget888888 pla is the worst about absorbing moisture, if its even slightly humid in your house and you forget to properly store it then it can ruin the roll. I had to get a dehumidifier and sealed storage because I was tired of dehydrating my filament each week.
@jean-didierallongue4046
Жыл бұрын
If Val says it is good, it is good enough for me. Thanks for the review really my fav on KZitem!
@HideOut55007
11 ай бұрын
Amazing review Thank You! Looking at this printer as an upgrade to my Easytreed K7
@TafelLager12
Жыл бұрын
jesus the b roll on this intro
@ecobasetech4558
2 жыл бұрын
A tip I figured out with that cable clip that goes on the back of the x axis. Make sure the hook is pointed down, not towards the rear....
@Samson_Customs
7 ай бұрын
The enclosure that Creality recommend is not high enough the line drags the top. Need a flap so the reel stick’s threw. I’m running 4 Ender machines. All r great tools. Keep it up.
@paco2042
Жыл бұрын
During the leveling process, I used the paper to check the 4 corners, then auto leveled and proceeded to the offset. But the offset wouldn’t get close enough to the paper and capped out at 5. Idk what I did wrong. :(
@blindhorizon24
Жыл бұрын
Raise the bed with the large knobs and then start over with the levelling
@bendekoning5120
2 жыл бұрын
This video was SUPER helpful for me to learn how to assemble the printer, get a handle on what belts are adjustable vs not adjustable, and how to use Cura a bit. Thanks so much for the help!!
@Kfoo-dj4md
Жыл бұрын
Absolutely fantastic video, watched the whole thing in one go, thank you so much for all the information in the video
@jessicaalesso3653
Жыл бұрын
So helpful, thank you!
@andyfrankland-davies2164
Жыл бұрын
Thanks for this.... made the whole setup easy and less hassle than reading the maual. Have copied the curs settings and will try some ABS next ;)
@panicartist6033
2 жыл бұрын
Great video very well explained I will be following this when mine turns up
@SeanGildea77
2 жыл бұрын
This was fantastic! Thank you so much for the best tutorial on youtube!
@Drumaier
Жыл бұрын
38:06 I did this of putting g28g29 but it doesn't work like that, you have to put g28 and g29 as separate lines.
@mecheng2409
Жыл бұрын
Thank you. A really useful set up video. Well done.
@mads917
Жыл бұрын
Wauv your printer seems to work out of the box! When I do the corner leveling manually and then auto level it seems like the printer is completely forgetting the setup (and Z height) and stops the nozzle >5mm away from the bed. I cannot adjust the corners any higher, and I cannot compensate that much on the Z height, so now I don't know how to proceed.
@NathanJLaBrake
Жыл бұрын
I have the exact same issue. Did you ever fix it?
@scottfoot6320
Жыл бұрын
@@NathanJLaBrakemy z axis on 1 is more than 5 away. I've tried leveling 5 times now. Still same issue. Any ideas?
@NathanJLaBrake
Жыл бұрын
@@scottfoot6320 What I did to solve the issue was to reset to factory settings. It's a step that's shown in one of the demo videos on leveling that I hadn't watched. After doing that and then re-leveling, it worked properly.
@MujaChip
Жыл бұрын
Dont stop making videos. You going to make it big inshAllah.
@NZCasper
9 ай бұрын
Perfect video - exactly what i was after!
@fortifor5410
Жыл бұрын
Thank you buddy, very clear and helpful
@tcroft
2 жыл бұрын
Those B-Roll shots were amazing!
@frfrmpukn
Жыл бұрын
God bless you man! This video is a life saver!
@trsfc1595
Жыл бұрын
Very informative, I'm think of buying one, my first 3d printer
@ChadLuciano
Жыл бұрын
Thanks for doing the heavy lifting. Awesome video!
@LWJCarroll
2 жыл бұрын
Thanks Vlad for the closeups on the unpacking, I unfortunately have to send min back to our local NZ Creality agent for a warranty repair and needed this to see how to repack it!!!....Today's packaging's are like a very clever puzzle....Regards Laurie NZ
Пікірлер: 478