Nice! I'm envious. I used to have access to an old Epilog laser at work, not nearly as powerful. I used it to engrave my name on tools, metal pens, phones, laptops, key chains, cool designs on kitchen and pocket knives, and used the rotary attachment for names and sayings on mine and my kids travel mugs. The possibilities are endless. It wasn't powerful enough to etch a PCB out of a blank, let alone cut a piece of plywood. Please have fun!!!😁😁 Just don't attach to a shark, non vacuum type...
@hersch_tool
7 ай бұрын
lol yeah i've been doing the same thing, nothing is safe from getting plastered with my logo at this point. i am really liking having it in the shop, turned out to be a lot more fun than i was even expecting. And the thumbnail for this vid came perilously close to having a shark in it... 🤣 unfortunately my photo editing skills weren't good enough to make it as cool as what was in my head. thanks for watching btw!
@linuxster
7 ай бұрын
@hersch_tool 😆😆 Have fun! I enjoy your channel and always look forward to the next episode. Thanks for sharing!🤛
@wp2492
Ай бұрын
I “think” I want one of these…I appreciate the introduction to this tool. I’ve never used one before either so to see another newbie’s first impressions is helpful. How bad was the smoke it produced? Are you going to have to vent it? Looking forward to you using this in future videos!
@hersch_tool
Ай бұрын
Yeah they are very cool. It wasn't really on my radar either until I got one in my hands and I realized what they're capable of doing. The smoke really depends on the material, and what you're doing with the material. For example, cutting through thick wood produces a good deal of smoke and you'll want to plan for that. So far, just opening a window in the shop has been enough for me, but if I were planning on doing a large project in wood then I'd probably set up some ventilation. They also have a new "pro" version that's fully enclosed and comes with built in ventilation, I have a more recent video on that model too. Thanks very much for taking the time to watch and comment, I appreciate it.
@pikeyMcBarkin
7 ай бұрын
That keychain looks great my friend.
@hersch_tool
7 ай бұрын
Thanks bro :)
@foogee9971
7 ай бұрын
nice new tool! 👍
@hersch_tool
7 ай бұрын
thanks! i'm having a lot of fun with it. didn't know how much i needed a laser, until i got a laser... 😂
@Warped65er
7 ай бұрын
Thx for the vid.
@hersch_tool
7 ай бұрын
you're welcome, thanks very much for watching 😁
@syldysnya
7 ай бұрын
That’s a cool laser
@hersch_tool
7 ай бұрын
👍
@smashke
7 ай бұрын
Wow! Different color engraving based heat input?! Very cool. I’ve always been impressed with my creality 3D printer so this has definitely peaked my interest. Question, any idea what thickness of metal or plexiglass it will cut all the way through?
@hersch_tool
7 ай бұрын
Yep, pretty dang cool right? Having never used a laser before, I was having a lot of fun discovering all the things I could do with one. Having grown up in the 80s and 90s, I just kept thinking that I wished I could go back and tell my 10 year old self that, "one day, you'll be playing with lasers!" I would have been stoked... hahaha. The documentation says that it can cut 20mm wood, and 30mm acrylic, and I believe it. In the video I cut through 1/2" birch no problem. As far as actually "cutting" metal, ie; cutting straight through or cutting shapes out of metal, it can only do pretty thin stuff, like maybe 8 to 10 thou shim stock type thicknesses. Documentation says 0.15mm for actually cutting "through" metal, but I think you could push a bit further than that. I haven't done a lot of testing to see how far I can actually push it though. But it can engrave metal really well. That first metal engraving in the vid felt like it was a good .010" into the surface of that plate. Thanks for watching btw!
@stevemaynard7397
6 ай бұрын
Hi can you tell me the types and thickness of metal you have cut with this laser. I'm looking at getting one for our shop to cut gaskets and rubber seals and some thin metal. And also lexan polycarbonate
@hersch_tool
6 ай бұрын
You can burn natively into steel, but aluminum brass, etc will likely require a layer of etching fluid as it won't absorb the laser without it. As for cutting metals, it's not really meant for cutting metal more than a couple thousandths thick. You could cut steel shim stock, maybe up to .008" or .010" or so. But I don't know how well it would do with cutting metal any thicker than that. Other materials though, it'll cut right plastics and woods etc well over 1/2" easily
@stevemaynard7397
6 ай бұрын
@@hersch_tool thanks for your feedback
@jimsvideos7201
7 ай бұрын
I'd rather watch this work from the next room via camera than trust the provided goggles.
@hersch_tool
7 ай бұрын
Hahahaha! Yeah fair enough. I still can't get over the fact that im literally firing lasers in the shop now.
Пікірлер: 23