One of the outstanding features of this review is her willingness to print some models over again with slight adjustments and most models printed with the same materials from different manufacturers. She also covered a wide spectrum of available filament compositions. 😊The total amount of time that was spent preparing this review was absolutely amazing. This produced a very unemotional and complete review.
@BobDavidsonBerl
Жыл бұрын
Love the fact that you only gave facts and not feelings. So many people inject their feelings into their reviews making their results seem like they are the results of every machine with the same name when in reality they just either didn’t use the machine properly or got a machine with some issues. I feel like the view you represent is scientific and very, very useful. You neither wrote it off nor endorsed it, you just told it as it was. Thank you!
@Soravia
Жыл бұрын
I remember when her head was barely above her work bench table
@galvani4987
Жыл бұрын
they grow up so fast! ❤
@BennyTygohome
Жыл бұрын
She is a genius. Couldn't believe it when i learned she's 8th or 9th grade. Tiger moms are real 😂
@chpunisher2005
4 ай бұрын
@@BennyTygohome wait. Say what now? I thought she was late teens/early 20's. She definitely doesn't talk like an early high schooler. That's super impressive.
@mrmidnight32
10 күн бұрын
I just want to say thank you for showing the product, giving the price, name in the video cover photo. And then following up with direct cut and dry information. Its nice to break up the personalities and jokes with hard information and cut and dry reviews 👍
@dthillafap
Жыл бұрын
Nothing but the facts . Clear thinking analyses . Excellent print/printer comparisons . Vastly more informative than the majority of 3d printer channels. Professional. Subscribed
@ja-no6fx
9 ай бұрын
honestly, great review holy crap
@stephan.scharf
Жыл бұрын
There are tons of other 3d printing channels out there, but Aurora Tech is the best. Unbeatable!
@KZ-yy9pm
Жыл бұрын
Yeah it’s crazy how there are channels with a lot more followers that always get the new new first and they don’t compare to the reviews on ATC. IMO if you are shopping for a printer this is one of the first channels to go to.
@shakkabubba
11 ай бұрын
The gold standard. 🇺🇦
@jakob.k_design
Жыл бұрын
A head to head comparison between the K1 Max and the Qidi X-Max 3 would be nice, with the exact same filament and layer heights.
@MoonDraconian
Жыл бұрын
I'm torn between these two and such a comparison would help me a lot
@DS-pk4eh
5 ай бұрын
I would like to see how it compares with Bambulab P1S, as its almost the same price.
@henrywarren811
9 ай бұрын
One of the best channels about 3D printing. I'm pleased with the frequency of new videos being released
@atlasunit22
Жыл бұрын
no one will mention it, but great looking hair. I've been waiting on this review! thank you!
@thecoffeejesus
5 ай бұрын
This is the kind of KZitem video I remember from around 2010-2014 that I would put on and fall asleep to every night. I always learned something, and it was so peaceful. Thank you so god damn much for making this. I will be a subscriber and supporter of yours for a long, long time.
@UncleJessy
10 ай бұрын
Holy smokes! Will be linking people to your amazing video when I post mine. So indepth!
@AuroraTech
10 ай бұрын
Thanks uncle Jessy! It means a lot to me, and I appreciate your support.
@Nichabod_Crane
Жыл бұрын
Finally! A detailed review. Thank you for putting out the quality videos with awesome information!
@rarbiart
Жыл бұрын
this is the perfect type of review, just facts, a lot of facts. clear statements, , no distracting side stories.
@tyrannicpuppy
Жыл бұрын
Definitely a very helpful review. I had thought when you reviewed the smaller model that it was an interesting options, but I wanted that bigger print volume. And while it very much seems that the hardware still has a way to go to truly fulfil it's potential, I'm still a couple months out from the cash I intended to use to pay for it anyway. So hopefully, in those extra weeks the firmware will come to match the potential. I'll still be giving all the options a good look closer to purchase time, but you've definitely helped me narrow and refine the options. Great work. Really glad I found your channel. Nice and informative with a good list of pros and cons while acknowledging the ever changing nature of the space. It still seems that the Bambuu has the premium feature set crown in this category. But as all I want to do is print my own collectibles, I don't need all the bells and whistles. A shame that it can be cheaper to buy these sorts of machines than to buy legit licensed collectibles from some of the fandoms I love. But what a world we live in where it's possible to make your own.
@rabbidjeremy9193
7 ай бұрын
You have a pleasant voice and gave me a lot of great information, thank you. Especially for the 13:53 comparison shot. Really making me think about the bottom 2 as the machines I want to pursue.
@Liberty4Ever
Жыл бұрын
Thank you. Your reviews are consistently the most thorough and informative. I appreciate the effort you put into testing all of the features and capabilities, including a variety of filaments.
@Jazzzy1975
8 ай бұрын
One of the best review videos I watched. Honest, straightforward, clean. Thanks!
@floodo1
Жыл бұрын
Thx. I really appreciate that you used the Sunlu sponsored filament in comparison with other filaments. Great review as usual, especially as I am in the market for an enclosed “it just works” printer. I think I just settled on P1S with AMS thanks to your recent reviews!
@besttourinrio9
Жыл бұрын
You guys are the best ! Your perceptions and analyses really impress anyone ! You guys are the reference today for reviewing 3D printers!
@AndrewAHayes
Жыл бұрын
agreed!
@MichaelInEast
4 ай бұрын
I really think that this is one of the most best review video i have ever seen in my life. That's so cool
@kyleb4327
Жыл бұрын
Creality finally listened to you and included the high temp nozzle! We all thank you!
@jimkelsall9349
Жыл бұрын
That was a great and detailed printer review. Thank you. I am now subscribed.
@irwinpks
Жыл бұрын
i love your reviews....straight to the point without any fluff that other reviewers have
@Reindeer-ry2lf
Жыл бұрын
Well excellent review. I think I will stick with my X1 carbon. However the added volume is great. Thank you again. 💪😎
@justiciaparaespana7236
Жыл бұрын
There was a rumour that Bambu Lab is going to launch a bigger version of the X1C... So... I will keep my money at home until a new one is released. I have the K1 and it was a complete disaster... Right now I left dissasembled until after summer that I will try again to fix it because It was printing a vase and it stopped in the middle of the printing without any reason and the screen got frozen.
@Cujobob
Жыл бұрын
@@justiciaparaespana7236yeah they filed paperwork for a couple of new models. One is likely a smaller version and the other a larger version. I’m just waiting to see if they update the normal X1 carbon before diving in. I’d consider this K1 Max but it’s hard to support Creality at this price point.
@Finchyboi14470
Жыл бұрын
I’m sure you’ve already got this in the works, but I would love to see a review of the Elegoo Neptune 4 or 4 Pro. Your reviews are so detailed!
@PracticalTechnologist
Жыл бұрын
I am also waiting for this review
@even1007
Жыл бұрын
4pro ! In its hometown of China, it has received overwhelming praise.
@djdesiderium
11 ай бұрын
I would also love this!
@Liberty4Ever
Жыл бұрын
I was initially very enthused about the K1 Max, although I suspected the lidar was added by the Creality marketing department rather than the engineering department, so it would compare favorably with the Bambu Lab X1C on a features comparison chart, and your review seems to confirm that. Hopefully, lidar will be fully enabled in a future firmware upgrade to become a useful feature. I'm convinced that I want to upgrade to a Klipper 3D printer but my only justification for the large build volume is to be able to print multiple copies per batch for a small print farm. I'd like to get back to printing ABS but at this point, I should probably convert my ABS parts to PETG and get a non-enclosed bed slinger for the lower cost, reliability and ease of maintenance. In practice, I mostly print TPU so I'm not going to benefit much from a high speed printer. I'd like Klipper for the input shaping that will hopefully allow TPU printing at the maximum material flow rate while improving print quality. I also want Klipper so I can print over WiFi rather than shuffling a micro SD card. I'm now looking to the newer Klipper bed slingers from Sovol and Elegoo.
@Soravia
Жыл бұрын
Sunlu PLA CF is not as stiff as Hatchbox PLA CF, but less than half the price when ordered in bulk. It works well for high heat print and produces very good quality surfaces. Very good for high temp prints that can vary from high to low speed.
@jakubmacuha624
Жыл бұрын
❤ such a cute hairstyle 😊
@slashsplat
Жыл бұрын
Absolutely THE BEST review. Comprehensive. Subscribed.
@nalacha
Жыл бұрын
another great video! really liked how you called out Creality to get things going :D
@betafoofoo270
3 ай бұрын
Excellent review very professional, dispassionate and informative. Thank you.
@tannerdudeman
11 күн бұрын
You can totally print large functional vase mode objects with a 0.4mm nozzle, you just have to set your outer layer width to anywhere from 0.8mm up to 1mm. I know this sounds like a recipe for an instant clog, but it works like a charm (even on a stock ender 3 pro) and the strength is the same (if not better) than the same print done with a 0.8mm nozzle. the only minor issue i have encountered is sometimes the bottom layers have a problem staying attached to the wall, but that can be solved by adding a raft with 0mm extra margin. that raft becomes your new, stronger vase/container bottom. Vase mode containers printed in PLA+ using this method are nearly indestructible.
@arunchari3866
3 ай бұрын
What a detailed unbiased review, 👍
@ovarb12
10 ай бұрын
Another great video. I like the channel more every video. Keep on trucking. I enjoyed your school speech. Can wait to see your high school grade speech.
@MrHrannsi
8 ай бұрын
Excellent review, to the point without fluff.
@thorntontarr2894
Жыл бұрын
The depth of this review just might point to Creality using you and your team to provide a 'sanity check' of what they have done to date. Most of the cons you present will likely be sorted in a release or two. I await your final judgement before buying this printer for my prototype parts for robotic projects.
@rich9792
Жыл бұрын
You have the BEST reviews!!! Thank you and keep up the great job!!!
@wt29
Жыл бұрын
Easily the best review site on YT. Consistent baselines and printing. Pros and Cons are well measured. Just curious if Aurora is this serious in real life? We need an outtakes video occasionally,
@4340leo
Жыл бұрын
Hi Aurora. Your hair is just lovely!!! Keep with de good work! From Brazil with love...
@cameltoast
10 ай бұрын
I've recently purchased one of these and be aware they have excessive VFA's. I am debating returning it because this quality defect is just not acceptable to me. This appears to be inherent to the design of the printer (and most other corexy printers) however, it seems Creality did nothing to mitigate it. As the stock input shaping out of the box has problems. First,it only runs input shaping on one axis and copies it to the other. You can root and create a Klipper macro that enables both but it did not help me much. In addition there appears to be something wrong with the X axis and damping springs they used on the gantry. People smarter than me have tried replacing the springs with stiffer springs but im not sure how much it helps. The K1 community just tells you to print faster. It all comes down to what you print, if you print highly ornate, large objects, at a fast speed, you will not notice these VFA's. If you try to print functional parts with large flat sides and it has to slow down below 300mms you will see the belts toothed pattern imprinted on the side of your print.
@corlissmedia2.0
Жыл бұрын
A great review tinged with very controlled disdain. Thank you for standing straight up to the challenge.
@garylester55
5 ай бұрын
Also, put the heat bed temperature to 60c. I was told this by a manager at Jaycar, they sell Creality printers. He is printing models in the shop that you wouldn’t believe unless you saw them. He bought 2 K1’s and a K1 Max for himself, they run 24/7. I live in Perth Western Australia. Cheers
@rammone5241
Жыл бұрын
I am convinced I will get a Creality K1. Great tutorial!
@rammone5241
Жыл бұрын
Two weeks later, I regret buy the K1 LOL! Someone hit me please. Had to replace the entire hot end after only printing less than 5 small items. It was easy to set up and printed fast as advertised but the biggest issue is the hot end, matter fact if anyone thinks about buying a KI just get the upgraded hot end and replace that factory, no joke.
@markmalonson7531
Жыл бұрын
Excellent! Thank you Aurora tech.
@even1007
Жыл бұрын
好喜歡這位小姐姐的娓娓道來,不偏不倚 詳實且充滿了經驗。我喜歡……❤❤❤ 謝謝小姐姐的節目!
@3dprintedhardware
Жыл бұрын
Another great review! I like the AI LiDAR calibration system, I know it did not really work in your tests but I'm sure they'll fix that soon.
@YourLocalRaccoon
Жыл бұрын
I would love to see you adding a 0.1mm and 0.05mm benchy prints (slowing down the print speeds as needed of course) to see how the printers handle that resolution. Being able to print at 0.05mm would be a BIG advantage to a printer! My old FLSun Super Racer (after some light mods) was able to print at 0.05mm absolutely perfectly, and I was actually working on printing evn lower with a 0.25mm nozzle but I had to sell it sadly. Anyway good work as always!
@DfrgSeb
Жыл бұрын
Thanks for this review. You did high quality test and review. Thank you much for that.
@marceloandriolo819
10 ай бұрын
Greaty video, very complete about K1s, i have one K1 Max, and in this moment we have less information about it and your problems and solutions, maybe you will have a new videos about this, but your video is very good, greaty information , thanks for share
@aberodriguez4149
Жыл бұрын
Great in-depth review as always guys this printer should be really ready in about 3 months so they can work out any kinks. XD
@HowleRWolF01
Жыл бұрын
just found your channel, what a fantastic review, clear and very informative. Loved all the tests you did with different material. looking forward to watching more of your content.👍👍👍👍👍👍
@wnen8611
Жыл бұрын
Bought my own K1`Max yesterday, cant wait for it to arrive, no more cutting op pieces that are to big for my Ender 3
@Сергейсаблин-т4ю
Жыл бұрын
Спасибо за обзор. Я очень люблю твой канал. Очень правильно и по делу. Вы большие молодцы 👏👏👏 спасибо
@bakingjamsmusic2491
8 ай бұрын
Excellent review with all the info I needed.
@corbymodelboatclub
Жыл бұрын
A very concise and helpful review.
@alessandrob3684
11 ай бұрын
Thank you! Like always awesome reviews , straight to the point!
@laich2
Жыл бұрын
thats a lot of hard work and printing.
@OccultDemonCassette
Жыл бұрын
Good hair day!
@rein813
Жыл бұрын
I'm totally agree with all what she teling us, except extruder! Extruded needs to be upgraded, should be fixed for holding and pushing filament properly to the nuzzle!
@3D_Printing
Жыл бұрын
17:04 Amazing it never failed with that make printed on it :)
@morphine07
Жыл бұрын
Is there a gen 2 version of this printer that comes with a textured PEI build plate?
@olafb.2929
Жыл бұрын
Very good review, thank you.
@michaelmalmborg3479
10 ай бұрын
Hi there! It would be great to get your feedback on the K1 Max after the firmware update that was released a week ago. Have that fixed the issues you adressed in this video? And propelled the K1 Max ahead of the X1 on your recommended list?
@Smokinjoewhite
Жыл бұрын
Great review as always :).
@martinholst1362
Жыл бұрын
Can you make a video on the P1S? Heard that the K1 has had a few problems so would like to hear your opinion on The Best Value fully-enclosed High-Speed 3D Printer (Regular Size). If you change your mind. Now that P1S is here. Super videos😊
@TMS5100
Жыл бұрын
@1:10 Really strange that creality does fully automatic nozzle probing and qidi's latest machines still uses outdated manual offset with paper method.
@atnfn
11 ай бұрын
I watched another review (247 printing) he had a much more negative view of the printer and didn't recommend it. For one the bed heating was terribly uneven.
@starley1807
6 ай бұрын
AMAZING REVIEW.
@SLICEDfinds
Жыл бұрын
Always enjoy your very well put together reviews. Hopefully you get a chance to review the new kingroon KLP1 soon
@nickreif7010
10 ай бұрын
a great, detailed video with lots of example prints! loved the video i would love to see a review on the neptune 4 pro/plus! i'm currently trying to decide between that or the k1 max
@Scriven42
Жыл бұрын
Woot, new sponsor! ❤
@Waltkat
10 ай бұрын
After watching this review, I kind of regret ordering a K1 Max. The Lidar being non-functional and the print quality being just so-so is a turn off. I should have waited until Bambu Lab released a printer with a larger print area, although I'm sure it will cost much more than the K1 Max, particularly if one has to add shipping cost. Maybe I'll just return the K1 Max when it arrives.
@seansersmylie
Жыл бұрын
Which do you think is better, this or the new x-max 3?
@mohistschool1003
Жыл бұрын
Max3, the bigger size and heating chamber
@TheHomecinemaFreak
Жыл бұрын
For me the qidi is the Winner between k1max and xmax3. I dont know why there is not a comparsion with the qidi Lama. But Lidar and other stuff is nice that is build in but it doesnt Work from the Beginning. Its a beta tester printer for me. I will go with the qidi. Thank you for testing the Printers.
@KLONESNETWORK
Жыл бұрын
great review!! it will better if u include like a tweak version of your own setting as most prints from these are only at default, thus it will be a great comparison from default to test quality and speed.
@HN-oq3gf
8 ай бұрын
great video. its on sale at microcenter for 200 bucks off! going to gets one.
@k1u0
Жыл бұрын
Hands down the best 3dp review channel. Thanks auroratech
@qwertyzxaszc6323
11 ай бұрын
Great video! Thankyou!
@GoodScienceForYou
10 ай бұрын
I have had only problems with my K1 Max. It has become a worthless anchor in my shop. I have had many contacts with Creality and they are unable to make this printer work as advertised. I have over 24 printers and all of them work as advertised. This one has never worked as advertised. The Bambu Lab PS1 makes this printer seem really bad. I have never had a problem with the Bambu Lab, and I love my Creality printers so far. This K1 is not fully engineering "baked". The prints from the Bambu Lab are some of the best I have seen. Clean all the lines 'line up" and the print times are amazing. I have asked Creality for a refund or send it back for one that works.
@ericthecyclist
Жыл бұрын
what I'd really like to see reviewed is the blackbox 3d printer as it seems like a competitor for the Prusa XL multi-head printer. Maybe you could get somebody to loan you theirs for the purpose. Side note: on your printer review page, it would be nice if you included a list of the names of the other printers you have evaluated, the ones that didn't make the grade into your top printer in category list.
@austinchong7355
7 ай бұрын
I wish you would mention/show the print speed. especially when comparing the print time vs regular printers. I assumed you were printing at 600m/s but the creatity slicer speed bar did not looked maxed out so now im left with unknown variables.
@adamcboyd
7 ай бұрын
So what's the deal with the lidar now, six months later from this video? I just ordered one tonight but I can't find any good info on this. I am sure most youtubers are just there for the money and getting cool free stuff while not bad mouthing the people who send them free stuff but this is the kind of shit that matters and it breaks my heart we don't have more critically minded people out there. But back to the lidar in Feb of 2004. What's the deal? Any updates? Anyone else actually notice this? Was hers just broken? I would appreciate any info so I know what I am getting into.
@awesomearizona-dino
Жыл бұрын
Hi , if you would like some warm air, we have been about 108-116 recently !!! (42 - 47) Thanks for the Great work and efforts.
@TheDIYer
Ай бұрын
Can you make one video showing which printer in stock config gives the advertised flow rates and what is the actual flow rates of those which don't , using same filament for all tests at same temperature. It would probably make a cool video, Thanks
@sarabandepress
Жыл бұрын
Great review but sadly my unit was defective. I think the bed was so warped that it could never complete the leveling process. It tried for over 10 hours! I decided that Creality still does not have adequate quality control. I got an RMA after a week of fighting with them. No refund has happened yet. More fun for next week. I have 3 Prusa mk3+ machines that just keep cranking out parts. I wanted the K1 Max to do the same. Didn't happen. Other KZitem videos show the same problem that I had.
@chriswaldron2617
Жыл бұрын
Auto bed levelling, wish I knew about this printer before I bought the S1 Plus about 2 months ago.
@TestTest-eb8jr
Жыл бұрын
Good detailed review with valid criticism!!! 🖒@Aurora
@ja-no6fx
9 ай бұрын
This video should have been called ender k1max torture test 😂😂
@Jbobonline
Жыл бұрын
Aurora the wise strikes again 💪. What is your opinion about the filtration system built in to the system?
@AuroraTech
Жыл бұрын
It's the same carbon air filter used in the BambuLab X1C. I can't smell the odor at all, even when printing ABS and Nylon CF with the enclosure fully closed, it works fine.
@3dprintedhardware
Жыл бұрын
@@AuroraTech Does that filter fan circulate the air inside the enclosure or does it move the air to the outside of the printer?
@rsilvers129
Жыл бұрын
This makes more sense than building a Voron. In a world where Bambu exists though, this is still missing AMS and the nicer slicer. Can’t help but feel bad for Prusa as they are now behind Creality.
@rdvanpolat322
Жыл бұрын
Thank you for your review. On the Creality site, it states that the AI lidar measures the first layer and whether there is a problem with the first layer. They didn't mention anything about the print coming out well.
@AuroraTech
Жыл бұрын
So-called AI features on 3D printers, including those on Creality or even on my other BambuLab X1C, have created more problems than they have solved so far. As a result, I have chosen to disable all of them.
@gcerchio
Жыл бұрын
How easy is it to swap the nozzles?
@mrfireclaw
Жыл бұрын
😊 Hey lil 1 which 1 is better the bamboo or this one of the K1 I'm not too familiar with it I am still looking to try to find a decent printer but there's so many out on the market and all of my knockouts or
@DS-pk4eh
5 ай бұрын
Is this model more like K1C than just K1? Because I heard many bad things about K1 but K1C is usually praised for its features and print speed and quality, getting closer to BambuLab printers.
@bluerider0988
Жыл бұрын
Another great review. Thanks. I'm not sure why the filament would load from the back. That's a really bad idea.
@genisphyla
Жыл бұрын
The best!!!!❤
@hermancircus
Жыл бұрын
I have the K1 MAX. where do I get the updated firmware?? it is not on Creality's website...
@RomanShteringarts
Жыл бұрын
I'll be glad to know about firmware too!
@terraexcognita6637
4 ай бұрын
Tronxy bringing the pride filament yo
@NaughtyGoatFarm
7 ай бұрын
OK so 5 months later and multiple firmware updates, has anyone been able verify if the lidar does anything?
@LWJCarroll
4 ай бұрын
06:54. Does it record the results after scanning the zig-zag pattern? So you can have a look for your own info. Thanks. Laurie NZ. 😊
Пікірлер: 305