I've just bought the Creality Falcon 2 40w ... hope that the enclosure will be sold separate .
@s3sebastian
7 ай бұрын
Yes it will be. And they have the giveaway for 3 enclosures going on (link in the video description), maybe you can try to win one there.
@MrFRANCISCO316
7 ай бұрын
Sadly I’m in the USA where the Pro still is not sold. I really wish they bring it soon. I’ll would buy it for the enclosure alone, over an xtool D1 pro.
@bentoombs
3 ай бұрын
I just bought a pro 2. Game on
@ericcaginicolau
5 ай бұрын
Nice video thanks. About the rotary tool: I see on their website that they've removed the bottom of the engraver and raised its height with additional feet when using the rotary tool, so that maybe by doing this you can greatly increase the sizeof what you can engrave.
@s3sebastian
5 ай бұрын
Yes, I mentioned it shortly at 4:28, but didn't do it myself since I also have the standard Laser Falcon 2. Kind of defeats the purpose though (safety, full smoke containment). For those who buy it because of the CE or FDA classification it's probably not what they want to to when using it for a business. For hobby use it's good to have the option though, if one does not have an open frame laser engraver as well.
@scrampker
5 ай бұрын
@@s3sebastian The Falcon2 Pro 40w cannot work without the tray installed as there are magnetic sensors to prevent this. There's no way, out-of-the-box, to increase the z-height. It's very frustrating. Another annoyance is that in all the promo videos and photos from Creality, the combo kit comes with a CHUCK style rotary, not the junk roller-style. For the price, this should come with the feet, a magnetic bypass, and the chuck rotary. No question.
@zeroease
17 күн бұрын
Hey! This is super helpful for newbies like me. I’m stuck choosing between the Acmer P3 and the Falcon 2 Pro. What should I focus on? I really want to carve faster and get good precision since I need to make a bunch of wooden keychains. Any tips? Thanks!
@s3sebastian
17 күн бұрын
The Falcon comes with an additional 1.6W laser head if you buy the 40W, it has a higher precision but is slower of course, the lower power modules can have a finer laser spot because they just use one diode. I also have an Acmer, but the P2. The engraving speed between the 40W Falcon, the 48W Acmer or the new 60W Falcon is not so relevant IMO on this kind of laser. The only advantage I see with the Acmer is that they have the IR module. Not sure where you would want to buy one, here in Europe the Falcon 2 is now available from resellers for quite good prices too, way below the launch price.
@jacquelinebriggs7153
5 ай бұрын
Where did you get the air extractor from?
@Robert-fr7xt
7 ай бұрын
Is it possible that the enclosure it self will be available and when ? Thank you
@s3sebastian
7 ай бұрын
Yes, you can win one of three enclosures for the non-pro version of the Laser Falcon 2 in the Creality giveaway (link in the description). It will also be sold of course. Not sure when it will become available where though.
@BlackDim100
7 ай бұрын
When will the Pro version be available?
@s3sebastian
7 ай бұрын
Around the 20. February
@BLUEMOONENTERPRISES
6 ай бұрын
It looks like cleaning the acrylic will be problematic. When the front rolls back, it covers the part in the back. Would be much easier if the lid lifted completely.
@s3sebastian
6 ай бұрын
I did not have much smoke settle on the acrylic, it like to go onto the kind of rough/brushed surface of the aluminum parts the most. Also there is an airflow from the front to the back. If you really like to keep the acrylic clean you have to clean it from fingerprints though, lol.
@Enjoyer713
5 ай бұрын
Hi Sebastian, vielen Dank für das tolle Video! Ich habe seit ein paar Tagen den Pro in der 22W Variante und versuche damit Kartons zu schneiden. Funktioniert an sich aber ich bekomme die Schmauchspuren nicht weg, hast du da zufällig ein paar Tipps? Danke!
@s3sebastian
5 ай бұрын
Schneller, weniger Leistung und dafür 3-4 Passes funktioniert manchmal. Hängt aber vom speziellen Karton ab (Bastelkarton, Wellpappe usw.), auch wie viel Air-Assist Luftgeschwindigkeit am besten ist. Schneller und mehr Luftgeschwindigkeit ist generell das was ich probieren würde um weniger Rauch dran zu haben.
@custosdesign1053
6 ай бұрын
Where did you get the fume extractor? I can't find it anywhere on their website.
@s3sebastian
6 ай бұрын
It will be released later, you can join the Laser Falcon 2 Pro FB group there are usually updates. On Aliexpress, if you search for 240W or 350W smoke extractor you can find very similar models already if you want one now, I would assume it's some kind of OEM product.
@fraschfrasch9101
7 ай бұрын
Hallo Sebastian, danke für das tolle Video. Wie bist du an diesen tollen Lasercuter gelangt? Liebe Grüße aus Hamburg Frank
@s3sebastian
7 ай бұрын
Das ist das Vorführmodell von der Formnext-Messe in Frankfurt letzten November. Die ganzen 3D-Drucker (von den richtig teuren Industriemodellen mal abgesehen) usw. werden da meistens auch am späten Nachmittag des letzten Messetages günstig angeboten, weil insbesondere die Hersteller aus Fernost die nicht wieder teuer zurückschicken wollen. Kleinere Sachen wie Filament oder 3D-Druck-Stifte wurden auch verschenkt. Wenn man etwas herumfragt bei den Ausstellern bekommt man meistens auch einen Ticket-Voucher, weil relativ viele da welche übrig haben.
@fraschfrasch9101
7 ай бұрын
Danke für die Antwort 😊
@Nicole-qp6xc
6 ай бұрын
Will this product be launched on the official website on February 20th or will it be launched on Kickstarter?
@s3sebastian
6 ай бұрын
On the website. If you look at Creality's FB page or their YT channel there is now also a live stream announced for the launch where you can win one. Depending on your time zone either on Monday or Tuesday (in about one day).
@samirakazempour7567
7 ай бұрын
Hello, thank you for sharing the video. I have some questions about the availability of the Laster Falcon 2 Pro. Could you please provide information on when it will be released in the market? I've been searching online to make a purchase but haven't been able to find it anywhere. I would like to receive it in the UAE. Additionally, could you provide details on its cost?
@s3sebastian
7 ай бұрын
At Formnext it was said that the Pro would be around 2000 USD, but I don't know who distributes these in the UAE unfortunately. Maybe write an email directly to the CrealityFalcon team, the URL is in the video description.
@samirakazempour7567
7 ай бұрын
@@s3sebastian Thank you for your prompt response! It appears that the Falcon 2 Pro is currently unavailable in any market worldwide. Would it be possible to provide information on its anticipated release date? appreciate your help!
@mikem2403
6 ай бұрын
Any thoughts on this vs the regular 40w non-pro?
@s3sebastian
5 ай бұрын
Pretty much the same unit between the drawer at the bottom and the top part of the enclosure, so the laser performance is the same. Only that the Pro 40W will also include a 1.6W module for fine detailed engravings (even finer than changing the mode to 22W). All depends if you a) need the CE/FDA complying machine for work or so and b) if you want to add an enclosure on your own or use it outside anyway.
@markusschicker8539
6 ай бұрын
Hallo Sebastian, von wem kommt die große Absaugung? Hast du bitte einen Link für mich. Vielen Dank.
@s3sebastian
6 ай бұрын
Der Filter mit der Absaugung ist auch von Creality, der ist auch auf der Produktseite zu sehen und wird dann am 20.2. vermutlich auch verfügbar sein. Das ist aber denke ich ein OEM-Produkt, weil man findet z.B. bei Aliexpress (nach 350W oder 240W Fume Extractor suchen) sehr ähnlich aussehende Absaugungen mit den drei gleichen Filterelementen.
@etog143
7 ай бұрын
enclosure is not in website
@s3sebastian
7 ай бұрын
Yes not yet, but you can try to enter the giveaway already.
Пікірлер: 35