Create-A-Bed® Deluxe Vertical Murphy Bed Kit. Build your own Murphy Bed or Wall Bed with this easy to use kit and instructions.
www.createabed...
CHAPTERS
0:00 Introduction
1:34 Unpacking the Kit
3:15 Jig Saw or Coping Saw Philips Head Screwdriver
3:27 Hammer Clamps Straight Edge or Framing Square
3:33 Buying the Materials
4:22 Identify Components of Bed
5:00 Cutting the Wooden Components
5:35 Construction of Inner Wood Bed Frame
7:20 Preparing the Side Rails
7:37 Not using PLYWOOD for Parts B Side Rails VOIDS WARRANTY
7:47 Marking & Drilling the Tubular Leg Mounting Holes
13:30 Attaching the Leg Support Rail
14:21 Marking & Drilling the One-Inch Pivot Holes
16:02 Mounting the Lower Ball Stud Plates
16:05 Placement of Metal Components Varies with Bed Size
21:57 Mounting the Female Pivot Plates
24:02 Attaching the Foot and Head Rail to the Inner Wood Bed Frame
25:47 Attaching the Left and Right Side Rails to the Inner Wood Bed Frame
28:19 Preparing the Face Panels
28:42 Mounting the Face Panels to the Bed Frame
33:06 Cabinet Verticals: Mounting the Bed Stops
34:14 Cabinet Verticals: Mounting the Upper Ball Stud Plate
36:25 Cabinet Verticals: Mounting the Male Pivot Plate
42:46 Preparing the Headboard
43:01 Assembling the Header
47:45 Sanding and Finishing Your Bed
48:37 Assembly and Installation Instructions
49:40 Tape Measure Philips Head Screwdriver
50:27 Installing the Plywood Mattress Supports
51:35 Assembly Instructions
58:01 Follow Instructions for Removal of Gas Springs
59:23 Anchoring to WOOD STUD Construction
Негізгі бет Create-A-Bed® Deluxe Vertical Murphy Bed Construction, Assembly & Installation Video
Пікірлер