✅ Materials used in this video (affiliate links): ➡ LOKLiK Crafter Cutting Machine - amzn.to/3Rmtk4y ➡ Primrosia Markers - amzn.to/3U0DXMu ➡ HTVRONT Standard Grip Mat - amzn.to/3O7o4jl ➡ Brayer Tool - amzn.to/3O2209M ➡ Score Board - amzn.to/4b7Ahi2
@chyannriley804
21 күн бұрын
I'm so appreciative for this video. This is the best and most detailed video I've seen, just what I've been looking for.
@craftwithfelicia
15 күн бұрын
Awesome and thank you!! 🙂
@michaelosmon
10 күн бұрын
This was cool to follow. Thank you for sharing your skills knowledge and experience. I appreciate you
@craftwithfelicia
9 күн бұрын
You're welcome and thank you for the positive feedback. 🙂
@michaelosmon
8 күн бұрын
@@craftwithfelicia can you please tell me if the mat that comes with the machine is supposed to be nearly impossible to remove vinyl from? I tried using the paper for the calibration and when i went to remove the paper it shredded. In their video they show the same color mat as you do and i have and regular paper comes off for them so easily. My last attempt it stretched the vinyl super bad because it sticks so hard and i put transfer tape over it first to try and prevent that. Your video was great and i can use the software just fine but the odd size of the machine coupled with this mat being way to difficult to use with vinyl and other options for mats not being available anywhere have me ready to return this machine.
@cheryltracy4433
7 ай бұрын
Thank you Felicia! This was driving me crazy.
@craftwithfelicia
7 ай бұрын
You’re welcome! Glad it helped!
@davidchandler7160
7 ай бұрын
Would be great if LOKLiK could enable Pen or Cut control at the layer level in Idea Studio v2.
@craftwithfelicia
7 ай бұрын
Agree.
@chuckfreshchill8962
7 ай бұрын
Happy Valentines Day!
@craftwithfelicia
7 ай бұрын
You too! ❤️
@davidchandler7160
7 ай бұрын
Looks great
@craftwithfelicia
7 ай бұрын
Thanks 🙂
@Lynn-fb7rg
3 ай бұрын
your design is so cool!! I really love it
@craftwithfelicia
3 ай бұрын
Thank you but not my design. I got it here - designbundles.net/the-t-store-design/2970692-valentine-s-day-joy-card-svg-design-valentine-s-da?ref=AlzBbp 🙂
@carissa4110
5 ай бұрын
I'm so glad you know how to use their software! I find it not to be user friendly as much as Cricut Design Space. I get so frustrated that I end up not using it, and I honestly prefer this cutting machine to my Cricut Maker.
@craftwithfelicia
5 ай бұрын
LOKLiK is supposed to be putting out a major software update in June. I don’t know what’s going to be included but I’m hopeful it will be much better.
@admtim
7 ай бұрын
Great idea! Just went to Target to buy a birthday card and most are like $5!!!
@craftwithfelicia
7 ай бұрын
Thanks. Store bought cards are so expensive.
@sharondeacon8909
7 ай бұрын
Hi, thank you for the video . I am in the UK. Is there an alternative pen I can use, as they are very expensive to buy here. Look forward to more video. X
@craftwithfelicia
7 ай бұрын
I tried my Cricut Joy pens as well as my Cricut Maker pens but they didn't work. The pens have to be skinny. I haven't had a chance to look for others that may work.
@sharondeacon8909
7 ай бұрын
@@craftwithfelicia Thank you.
@ahalysiadavis7971
7 ай бұрын
Can the brush side be used as well in the loklik ?
@craftwithfelicia
7 ай бұрын
Will have to test it and get back to you.
@alejandrorodriguez7790
20 күн бұрын
I’m using the pen that came with my plotter, but when I place it in the holder and try to draw with it, the pen doesn’t touch the paper. It does all the movements, but just won’t touch the paper. Problem is when you pic “Draw” you can’t adjust the parameters.
@craftwithfelicia
15 күн бұрын
Mine didn't come with a pen. Let me do some testing and see if I can figure out what the problem might be.
@patriciaespino6620
6 күн бұрын
The same happens to me the pend missing parte to my letters the dont draw the whole word Here in Usa Also i need buy more pens..i try diferents but any work
@roisinsales2977
6 ай бұрын
Felicia what font did you use? I can’t get a fine line when printing
@craftwithfelicia
6 ай бұрын
Not sure what found that is. It was part of the file I downloaded here - designbundles.net/the-t-store-design/2970692-valentine-s-day-joy-card-svg-design-valentine-s-da?ref=AlzBbp
@jeanmerris7463
5 ай бұрын
How do you get the brush end in the holder? They are 2 different sizes.
@craftwithfelicia
5 ай бұрын
I only used the fine point end. I haven't yet tried the brush end.
@326DONCASTER
4 ай бұрын
What is the other side of the pen used for. Will not fit in the machine
@craftwithfelicia
4 ай бұрын
It will fit but it's a brush tip vs fine tip. I haven't tried use the brush part yet.
@alessiasimone6446
2 ай бұрын
How much gr/m2 is your paper?
@alessiasimone6446
2 ай бұрын
Then, i would like tò know how do you Discover the compatible pens? Are there a sort of list?
@craftwithfelicia
Ай бұрын
No list that I'm aware of. For me, I tried what I had on hand and the ones in this video were what worked for me.
@craftwithfelicia
Ай бұрын
65 lb cardstock
@roisinsales2977
6 ай бұрын
Hey there Felicia, this is probably a real stupid question but what
Пікірлер: 41