Hi everyone! In case you were wondering how to animate your own objects in Twinmotion, here you go! :)
@3dizris-virtualnaprenova29
3 жыл бұрын
Hi.. You have awsome tutorials btw 👍... However i have a probpem that i hope you can solve.. I have object (shadow screen) that can be open on position that i want in archicad. But how can i make that object (screen) to opening in twinnotion video simulation? So how to make a video that shows my object in moving(opening or closing) simulation? Thank you for your help 👍
@wurlitzer7886
3 жыл бұрын
Hi Justin, I am trying to add a bought model on a custom path, but it appears miles away. How can I bring it to the path? Your answer is very much appreciated.
@juanfelipegomezmunoz5552
4 жыл бұрын
MIN 2:25 ''What if you need to animate a boat moving into this water'' OMG i have been looking so badly for this, im into de boat designing bussiness and theres so few material about boat/water interactions out there... Haven't see the whole video but already hyped... lets finish it.
@I.play.Anno.2070
4 ай бұрын
Good job!
@hylanamorais9387
3 жыл бұрын
Nossa finalmente um canal que aborde melhor sobre o twinmotion, estava querendo tanto dar movimentos a outros objetos :)
@katharinefoley
4 жыл бұрын
Nice. I haven't used the custom tool yet, now I'm really looking forward to it. Thanks Justin!! ;)
@TheRenderingEssentials
4 жыл бұрын
Thanks Katharine!
@paafuglify
4 жыл бұрын
very cool ,perhaps you could make the watersplash/ and or the dripping effect follow the same path , to make a more realistic look to the boat sailing through the water ? Thanks for you videos, very helpful
@insanemetalband1277
4 жыл бұрын
Hello, thanks for the useful tips, i am looking to see how can I animate, besides custom paths, more like rotating a door or lifting something with a crane
@TheRenderingEssentials
4 жыл бұрын
It's a feature on their development list
@targetzero100
4 жыл бұрын
Justin, I would like to import an FBX model car exported from FormZ and animate it on a custom path. Is that possible or can I only use objects in TM's library?
@ringoze
2 жыл бұрын
Adding 'motion noise' to the boats pitch and yaw etc would be more helpful than the limited physics feature.
@Moskeeto
4 жыл бұрын
Good video. This animation tool is a great way to also animate section cuts. You should do a video on that as well.
@TheRenderingEssentials
4 жыл бұрын
That's a good topic idea - thanks!
@ericsonsilva7715
4 жыл бұрын
Brother, teus videos são da hora to curtindo muito, aqui no Brasil o Twinmotiom ainda é pouco usado. Parabéns
@MrSoukhoy1000
Жыл бұрын
انت واد عسل و بحب فيدوهاتك لانها سهلة و قصيرة و بسيطة
@saurabhjaiswal3669
4 жыл бұрын
Sir please make a tutorial about door motion🙏
@aethelwolfe3539
2 жыл бұрын
That only shows you how to animate objects already in the TwinMotion library. How do you animate your own imported models? And how can you import your own custom models that you animated already with Mixamo?
@cristinajb2507
3 жыл бұрын
Great channel with useful tips! I was wondering where one can get further animated objects specifically farm-animals (chickens, cattle, calves, pigs etc.) Is there a platform where I could download/purchase further objects for custom animations? Thanks for your help!
@wurlitzer7886
3 жыл бұрын
Hi everyone here! I am trying to add a bought model on a custom path, but it appears miles away. How can I bring it to the path? Your answer is very much appreciated.
@joshuapetrino
4 жыл бұрын
Loving this channel so far! Is there a way to keyframe the animation properties such as speed, delay, etc? ie; if I wanted to have a car stop at a stop sign and then continue through or stop before making a turn. Thanks so much!
@seance0
Жыл бұрын
Only one boat is there na?Can we add another model boat too in this motion path ? Increasing boats count.
@terrymortimer
Жыл бұрын
is there a way add my camera with my object like a car so it looks like I'm in the car
@jameschang7274
4 жыл бұрын
yeah just awesome! 3d should be this way for most of the none 3d modeler designers.
@TheRenderingEssentials
4 жыл бұрын
:)
@runtothehills04
2 жыл бұрын
I’d be interested in if you could animate a sitting human going down a zip wire/deathslide?
@joyddeyto5345
2 жыл бұрын
hi, can i ask, how can i import my escalator with animation? thanks
@tonysansone
4 жыл бұрын
Simply awesome bro!
@TheRenderingEssentials
4 жыл бұрын
Glad you like it!
@fahmeeddarwesh787
4 жыл бұрын
Hello. I would like to export video with sound like Rain,Highway. Etc. I tried more times but in video there is no sound coming after video render.please help for this.
@nadamaher59
4 жыл бұрын
Can we make the video start with the movement of the boat?
@TheRenderingEssentials
4 жыл бұрын
What do you mean exactly
@michaelgortsilas8637
4 жыл бұрын
Hi I want to do a Building Sequence Animation starting with earthworks, foundations, framework, walls, windows, doors and roof. Is there a tutorial that shows this? I want to drop these elements from above so they can work with physics gravity. Hope you can help?
@hunter7777
3 жыл бұрын
You said in your video that we could download the city you were using from sketchup 3d warehouse, but can you provide a direct link as to where that is found on that site. I have searched there, but can't find it. Thanks.
@juanfelipegomezmunoz5552
4 жыл бұрын
OK, it was helpful, not quite what i was looking for like creating the interaction of wake and foam in the water while the hull is moving into it or the wake that the ship leaves while it passes, BUT it was GREAT to understand the ''phisics'' button cause in my latest boat im having big problems trying to put people walking on the boat deck: For some reason, when I try to ''paint'' the people path, the orange ball goes trought it, like nothing was in there. However if I isolate the deck and start ''painting'' from BELOW the deck (camera facing from down the surface) it detects the patch inmediatly. So, OK, I just paint the paths I need upside down and the result is perfect but when I enable ''Show all objects'' the people start walking half meter below... With this ''phisics'' option at least I will be able to edit that final error and turn this in my favor..., Thanks man.
@TheRenderingEssentials
4 жыл бұрын
Glad it helped at least a bit :)
@juanfelipegomezmunoz5552
4 жыл бұрын
The Rendering Essentials HELPED A LOT SIR!!! I would love to post here the animation I did but This Yacht hasnt been aproved yet so... If I post anything public they fire me :(
@WaqasKhan-qr2se
4 жыл бұрын
Really helpful 👍
@TheRenderingEssentials
3 жыл бұрын
Glad to hear that!
@krischmiel2231
4 жыл бұрын
Hi. Is it possible to scale the object during its custom path? I can't find this option
@camilarabines1844
Жыл бұрын
Hi! Your videos are so helpful! I have a question, instead of putting a yacht, I have my own floating module i made on sketchup, in that case is it possible to import that module/object on twinmotion for it to be the one moving on the path i created?
@lega3855
3 жыл бұрын
can i make a skydorp effect in twimotion like lumion ?
@TheRenderingEssentials
3 жыл бұрын
I don't know what this means
@kathieleeolson
4 жыл бұрын
Is there a way to keep the object at the end of the animation without disappearing?? So say a vehicle driving and parking in a stall...
@TheRenderingEssentials
4 жыл бұрын
Not sure - I'd have to look into this a bit more
@stevejarrett1883
4 жыл бұрын
Hi Justin, Thank you for doing the video series Excellent summaries! Had a question for you as well. I have always been able to download in 19 from 3d warehouse but 20 for some reason won't? Has anyone else had an issue with this? Thanks Steve
@TheRenderingEssentials
4 жыл бұрын
I haven't experienced this issue, so I can't really speak to it...
@jessebrubacher4191
4 жыл бұрын
I'm trying this with an imported object, but the import has an origin that is far from the object. I can't seem to move the control gizmo or import with a centered origin, which makes the origin, not the object, follow the path. Any idea what I'm doing wrong?
@jessebrubacher4191
4 жыл бұрын
If anyone else is having this problem; hide object, right click origin, select reset. Then move your object to the origin.
@georgespapillon364
4 жыл бұрын
Thank you Justin !
@TheRenderingEssentials
4 жыл бұрын
Thanks George! :)
@hamzagok370
4 жыл бұрын
hi Justin, id a question. when the density of the vehicle path is low (4%) only the same car in the same color popups everytime.. do you know how to solve this? its a bit annoying when u make a timelaps with a road infront of u when in the timelaps the same car drives like 5 times.. thanku
@TheRenderingEssentials
4 жыл бұрын
I'm not really sure on this one honestly
@hamzagok370
4 жыл бұрын
@@TheRenderingEssentials thx for ur reply. Ill reproduce it in a capture nd shall send a video to unreal.
@AmilaCKumarasinghe
4 жыл бұрын
I had an issue while adding a candle in twinmotion. how can we add a candle flame? no any asset with a candle flame inbuilt right?
@TheRenderingEssentials
4 жыл бұрын
Correct - this one is a bit tricky - I'm not sure exactly how to simulate this with the tools available
@nulnoh219
4 жыл бұрын
Is it possible to add more than one custom path?
@lynxu2578
4 жыл бұрын
Ooh whatsapp guys, i really like it
@TheRenderingEssentials
4 жыл бұрын
:)
@fahmeeddarwesh787
4 жыл бұрын
Great....Thank you
@TheRenderingEssentials
4 жыл бұрын
Glad you liked it!
@Reinaldo_Ruiz
4 жыл бұрын
Hi! Justin, I have a question... If I made a custom animation in 3ds max can I import this animation to twinmotion?
@dmrm2161
4 жыл бұрын
Cool! Is there a way to animate an object once? Like open a door before we enter in a home, for example.
@NineOneOneFx
4 жыл бұрын
4:09
@TheRenderingEssentials
4 жыл бұрын
Under the animation type select the option for "once"
@KrissLafay
4 жыл бұрын
Hello, Can we turn on an AXIS an object and animate it? Like a windturbine?
@TheRenderingEssentials
4 жыл бұрын
At the moment I don't believe so in Twinmotion. Lumion can, and Vray can with Animator, but Twinmotion is basically limited to paths at the moment
@TheNickH1982
3 жыл бұрын
Hi, I'm looking to use twin motion to create some kind of MEP plantroom animation maybe showing water running through pipes or maybe an arrow or lines to show fluid movement, have you done any videos for this kind of movement or have any tips?
@TheRenderingEssentials
3 жыл бұрын
There's no fluid simulation option I'm aware of. Theoretically you could add a model of an arrow and move that along a path to indicate movement
@TheNickH1982
3 жыл бұрын
The Rendering Essentials I had a little go at that with the pipe only being small diameters like 70mm at most. And the pathing tool being big and lump it was quite hard to get it to look right
@project3dstudios99
4 жыл бұрын
Hey Justin! Quick question. Any way to bring my own object from SketchUp, and use it for my animated path? Thanks in advance 🙏
@lulus7511
3 жыл бұрын
Hi there, I can’t speak for Justin but from my experience, the answer is YES; open the panel showing all the elements you imported by clicking the small white arrow in the top right, in this panel click on the name of the element you want to use on your path, right click or click the 3 dots beside that element to see the menu and chose: add to user library. Now, when you open the left panel (where Justin found his boat) under Library, you’ll find “user library” and your element will be there. Basically you have to save your element from your model panel on the right to your library panel on the left before being able to use it. You then just do as Justin shows: drag and drop it on the white cube. Hope this helps.
@gharnakshacom
4 жыл бұрын
Sir how do I import sketchup to lumion sketchup to lumion when I am importing. But sometimes a whole heavy model is also running well and a box sometimes is not working. Plz help me sir While the system configuration is also good. (4gb graphics i5)
@lynxu2578
4 жыл бұрын
Forget avout Lumion. Start with TWINMOTION.
@TheRenderingEssentials
4 жыл бұрын
Here you go - kzitem.info/news/bejne/pX14336ks2pzd6A
@roniebernal8683
4 жыл бұрын
Hi justin, How do you capture objects moving on a custom path so it could be shown in a clip or movie?
@TheRenderingEssentials
4 жыл бұрын
I don't understand - isn't that what this video is about?
@Alipk1947
4 жыл бұрын
@@TheRenderingEssentials if i am not mistaken the question is about creating a scene the camera follow the object while following path and then we export that clip as a scene.
@AloneVFX
4 жыл бұрын
what is your system configuration
@TheRenderingEssentials
4 жыл бұрын
I talk about it here - kzitem.info/news/bejne/km2qyqmEkp9npYY - I think it might be listed in the notes below my video as well
Пікірлер: 86