I came here to learn about custom Daz models, and wound up learning how to make hair the CORRECT way, after struggling with it since March 2022 (when I started learning Blender). Thank you so much! You've earned a subscriber!
@salfolio
Жыл бұрын
Glad I could help!
@its_SahaN
Жыл бұрын
bro please record the video with key press viewer .....
@storm_hunnid
4 ай бұрын
Key cast you mean
@kickheavy8982
5 ай бұрын
Thanks!
@YCDesigns
Ай бұрын
brother, I can't sculpt the mesh after importing my mixamo avatar. When I go to editing mode the mesh goes behind the avatar
@lukesky123
11 ай бұрын
No way bro just made 21 with Daz 😭😭. New subscriber, I am definitely trying this. And by the way, you should apply to make music videos for them because this is 🔥🔥🔥🔥
@guiltyflicks
3 ай бұрын
what about game hair? with hair cards
@onlinegladiator5888
3 ай бұрын
THANK. YOU.
@koa8299
20 күн бұрын
how did you add a singular strain of hair at 3:45?
@JLJones4life
5 ай бұрын
thanks for the tutorial . How do you export the hair to use in another program like iclone or character creator?
@salfolio
5 ай бұрын
Yeah hair is always a bit tricky. You can convert it to a mesh geometry but this will significantly increase the poly count of your model. Not sure if there is any other more efficient way
@RichByForce
8 ай бұрын
You've got to make it a little slower next time its the first time for a lot of us
@TheJaviBravo
Жыл бұрын
life saver
@nayuta4108
11 ай бұрын
do you normally do hair first or animation first during the process of creating a character? and tysm for the helpful tutorial!!!
@salfolio
10 ай бұрын
I add hair after animation. Although it depends. If I use the Rig-GNS add on then I can add hair after
@jewshotya9278
Жыл бұрын
Appreciate what you’re doing bro. Have you played with the Rig GNS Lip Meter? I can’t seem to figure it out for the life of me
@salfolio
Жыл бұрын
I have actually! It’s a pain to use tho. I think it’s honestly better to use some sort of face capture to animate the face
@jewshotya9278
Жыл бұрын
@@salfolio yeah I’ve tried a few of the facial rig add ons and the sculpting is killing me. The metahuman facial rigging is legit but harder to get the model to look like the subject.
@salfolio
Жыл бұрын
@@jewshotya9278 metahuman is good but its impossible to get the subject to look how you want. I've been trying a few different options but haven't fully gotten any promising results yet. But if I do, I'll definitely make a video on it.
@cam_if_94
11 ай бұрын
hello, I'm stuck on the part where you have to use the eyedropper with the mirror and the shrinkwrap. When I use it, it doesn't recognize the genesis 8 male mesh. Nothing is displayed. Can you help me? Thanks 🙏
@Skymrreal
7 ай бұрын
bro did u find out the solution?? I'm stuck in that too🥺
@cam_if_94
7 ай бұрын
no I still haven't found it unfortunately. If you have a tip, please let me know 🙏@@Skymrreal
@Nevadem
11 ай бұрын
Hey bro what's is the shortcut for edit mode im lil lost ahaha
@Nevadem
11 ай бұрын
i try but just select me all the mesh i dont have the scalp seelctect im very new you are my first tuto ahaha
@sergiogelas221
9 ай бұрын
You going to fast in your videos, really difficult to follow the steps correclty :(
@rayanvsdaworld
10 ай бұрын
u explain so fast bro we cant understand shi I swear 😭
@timhoward5
6 ай бұрын
You can slow down the video yourself.
@hoodcomicslasvegas
6 ай бұрын
Duuuuude!!! key press viewer, key press viewer bro. You clicking like 20 buttons and talking ahead!! LOL you say Add particles but click on like 20 other buttons. How we suppose to see and hear. Now we have to rewind and worker harder to see what you doing. Good tut tho
@salfolio
6 ай бұрын
Yo appreciate the feedback! This was meant to be straight and to the point but I realized a lot of people found them challenging to follow. I’m actually re-doing these videos sometime next month so they’re gonna be a lot easier to follow. Glad you still liked it tho
@РишатИлиев-с6х
6 ай бұрын
I learned more from this 6 minute video about making hair, than from hours i spend learning the subject. Absolutely amazing. Thank you good sir
@taykfanp
6 ай бұрын
Please remake this awesome series with key press viewer, fullscreen and a deeper breakdown. Going step by step.
@clou6d.editss
6 ай бұрын
After i duplicate the mesh and make it a own object it glitches in his head and is matching with the rest of the head. Can someone pls help me?
@EIendir
19 күн бұрын
Epic tutorial many thanks .
@andresrodriguez3513
Ай бұрын
Hello Sal, I thank you for the tutorial, it is very well done, however I have a problem. When I try to (apply) the modifier (Mirror) it shows me an error message: (Modifier cannot be applied to a mesh with shape keys), I saw that it worked for some using the SSKEEPER plugin, however when installing it it still does not work. The version of Blender I use is 4.1.1, and the file is .fbx. Please help me. Can I skip this part and continue with the hair particles? Thanks for the help
@ticalos3432
18 күн бұрын
Amazing video dude thanks you have mai subscription i am a bighiner in 3D you help me a lot !
@MODMASTERIR
2 ай бұрын
dude can this method works for fifa game characters? please answer me and if you can make a video to show how make a hairs for pes and fifa games ❤❤❤❤
@aidanhester5807
Ай бұрын
I tried to make the afro buzz, but my hair doesn't come out in small curls like yours can you please explain how you did that
@yotxkyo
2 ай бұрын
How do you link the hair to the model so when u animate it, it moves with the model
@ijyy3705
2 ай бұрын
bro i styled the curly hair and then went back to object mode the hair looks the same
@mybfsasha4803
26 күн бұрын
If i was to buy this kit could I take the hair and beards into character creator 4 to use on my own models, im not good at blender *newbie and need some presets
@salfolio
24 күн бұрын
good question, I unfortunately haven’t done it so I’m not fully sure. I think you could export the hair as mesh objects and apply it but I feel like you’d run into other issues. I would personally try to figure out an alternative since I designed these packs to be used primarily in blender.
@bydreaminc
Жыл бұрын
Amazing stuff here man, seriously. Love to see someone doing a similar process to myself but teaching me so many new things I haven't learned yet. Would love to donate to your patreon if you have one. True goat
@salfolio
Жыл бұрын
Appreciate the support! I don’t have one right now but I plan to make one in the future! Cheers!
@TotallyTovar
Жыл бұрын
Thank you so much! I have been trying to learn how to do 2 big braids for males and this is the closest thing i could find for 3.5 would love to see how you would do it if possible
@cosmosnjuwa
Жыл бұрын
You're a very good teacher! Liked and subscribed!
@elijahleftridge
3 ай бұрын
Hey Sal, for the braids, how can we make sure they stay in place? Do we select all and then parent them?
@salfolio
3 ай бұрын
Yes! You have to parent the them to your rig. And also parent the curve object to your rig as well
@ppgf
18 күн бұрын
Genuis
@emeraldmultimediaproductio7392
Жыл бұрын
Great job bro. Can you pls share project blender files
@kickheavy8982
6 ай бұрын
You are the G.O.A.T. 🐐 Thank you for this bomb azz tutorial! Im about to go CRAZY making hair now. Shout out to YOU SIR! You should enable super thanks on your channel so you can accept money on youtube. i want to pay you some money to show my appreciation but it's not enabled. I know you have the buy me a coffee link but i'd prefer to do it here on youtube
@salfolio
6 ай бұрын
Glad you liked the video! I enabled the super thanks feature. Thank you for the support!
@kickheavy8982
5 ай бұрын
@@salfolio just did it! thanks man
@salfolio
5 ай бұрын
@@kickheavy8982 appreciate it a lot! thank you!
@WellBuilt-j8w
21 күн бұрын
Sir hats off really amazing. Please share more tutorials on different topics
@henningmaya
5 ай бұрын
🙏Thanks!
@yourboysil_star2883
11 ай бұрын
Man how did you texture that African skin hope you could make that tut soon it would be appreciated
@yourboysil_star2883
11 ай бұрын
I just watched your tut was amazing fews words and clear I enjoyed watching I have been struggling to make hairs for many years now I think this time will work bcoz I got awesome teacher short and clear LET ME GIVE A TRY
@felipe_gallego11
7 ай бұрын
Hello How much for 21 savage 3d?
@victorcabral5814
10 ай бұрын
Help me, I put the dreads after my animation (mixamo), when my character starts walking, the hair starts be crazy because its dont fixed to the character
@aaronanoos5650
7 ай бұрын
man this is awesome thank you for the video. by the way do you have a course on this specially creating different kind of hairs and beard? where it also explain the different settings. I'd like to buy.
@cfw.9999
7 ай бұрын
how to delete if u selected something wrong while drawing those oranges things
@peterstaker3230
4 ай бұрын
Nice job! Where did you get your character models?
@JamieDudley-k3u
7 ай бұрын
Yo Not able to use this method for the box braids can anyone break it down
@marcus3839
9 ай бұрын
bro - do you know how to do waves, i’m struggling
@3DIYOriginal
Жыл бұрын
Awesome tutorial. Well explained / Subscribed
@arthuraugustuscasado4364
5 ай бұрын
Thanks Bro! U salved my life
@christianthea1059
4 ай бұрын
one of the most valuable 6 minutes I spent in a while on youtube. that's really helpfull, thanks man
@davidanimations9622
2 ай бұрын
thanks, this really helped me alot
@vladtheeditor1
5 ай бұрын
Hey man, I tried doing this with a model already rigged with Rig-gns with animation attached from mixamo. But the hair doesnt stick to the head once the character starts walking. Do you know what can cause the issue?
@flickvfx
2 ай бұрын
Youll need to parent it to the head bone...
@Dubby____
6 ай бұрын
Please can anyone help me out? I duplicated half of the scalp as shown in the tutorial, but there is a shift in position everytime i switch between edit mode and object mode. What can i do to fix this and keep the origin points the same. Any advice would be great. Thanks
@wilfsonproductions
4 ай бұрын
With the scalp selected, press Shift D then hit Enter immediately. This should duplicate the scalp selection without moving it. Then proceed with separating. Hope this helps
@alessandromarostica7767
11 ай бұрын
Unbelievable videos, Dude! Thank you for sharing with us! Great tips! Congrats from Brazil!
@cambodianfarmers168
6 ай бұрын
How to export bro?
@dinotv77w
Жыл бұрын
SO GOOD BEST TEACHER
@mjm2600
Жыл бұрын
Yap for real
@thechris23
10 ай бұрын
From the part where you add roughness to the hair, mine doesn’t make it rough, it just makes separates the hair strands the more I increase the roughness
@c4m5ron
8 ай бұрын
Adjust the "size" value directly under "random" within the roughness settings
@pooh.mi.k
Жыл бұрын
Thank you so much for providing all of the content for free, i wish you all the best. 🥰
@ivar_dgtl
7 ай бұрын
How do we make the hair stay in position once we have rigged the character?
@salfolio
7 ай бұрын
Try changing the order of the hair particle system modifier. It should be moved before the armature modifier.
@armies2446
2 ай бұрын
So helpful
@dhsjshdhdhdh7916
Жыл бұрын
I'm watching you from Russia. bro you are very cool
@salfolio
Жыл бұрын
appreciate it bro!
@emidlux
Жыл бұрын
Why when i rig and put a animation the hair dont follow the model can you help me?
@salfolio
Жыл бұрын
Make sure your scalp mesh is parented to the rig. If you follow the exact steps I did then the mesh will already be parented to the rig because we duplicated it from the original character mesh. But if you use a separate mesh, then you will need to parent it again. If you parent it and the hair still doesn't follow, then you'll just need to re do the hair. This usually solves the problem
@tremony8219
7 ай бұрын
How can i keep the hair on its head after animating the model
@salfolio
7 ай бұрын
If you go into the modifiers for the scalp mesh, make sure that the hair particle system is applied before the armature (animation) that usually fixes the problem.
@CarlosMolina-fn3ep
Жыл бұрын
Thank you
@thebruhstyle
Жыл бұрын
Thank you!!
@nixonmanuel6459
5 ай бұрын
You're amazing! Thank you!!
@ReelLightz
3 ай бұрын
This dude did a whole 4 year college course in 6mins. wow
@kaizabi
Жыл бұрын
KING
@salfolio
Жыл бұрын
thank you king
@yuccievibes
Жыл бұрын
Anyone else having trouble the with the lineup?? All I’m able to do is move and scale the scalp.. how do I shape it?? I have proportional editing on. 0:44
@salfolio
Жыл бұрын
You might need to change your scale for proportional editing. Scroll on your mouse wheel until the scale is smaller
@yuccievibes
Жыл бұрын
Thanks for replying but it’s still not working. Do I need to be in vertex, face or edge mode? And what’s the shortcut you are using right before you start to shape the lineup?
@salfolio
Жыл бұрын
@@yuccievibes You need to be in vertex mode
@herozeaa
Жыл бұрын
im havin this problem did you ever figure it out?
@longliveavi
10 ай бұрын
@@herozeaa you must be in VERTEX MODE. Use the MOVE TOOL. Then click on one of the points to select it, click G once its selected, scroll the middle mouse and then you'll see the grey circle. If you don't see the grey circle try scrolling all the way down to 0 proportional size (you'll see the numbers move on the top left screen) then scroll up again once you've reached 0. It took forever but that worked for me.
@herozeaa
Жыл бұрын
what tool do u click on to start moving the verticles after u mirror and shrink wrap the hairline? when i try to move it,--- it just moves the whole white hair thing
@salfolio
Жыл бұрын
Enter edit mode and click on the proportional editing button. Then use the mouse scroll wheel to adjust the scale of the proportional editing
@amaniinthecut4443
11 ай бұрын
when clcik the vertices click g and scroll down untill you see the grey scroll
@xandercrew6088
11 ай бұрын
@@amaniinthecut4443 AMANLINTHECUT THANK YOU THANK YOU THANK YOU! That is what was missing. This tutorial is great but this part was not explained deeply --- Herozeaa and anyone else who is looking for this ---- AFTER MIRROR AND SHRINK WRAP you must deselect the mesh, click G and then using the middle mouse button you scroll in and out until you see a circle and then proceed as the video explains.
@amaniinthecut4443
11 ай бұрын
@amanimadeit_
@xanii874
10 ай бұрын
@@xandercrew6088 i still dont understand 😭😭 edit: NVM 💚💚
@whoisDML
Жыл бұрын
the locs isn’t working
@xanii874
10 ай бұрын
do we apply the hair on the model with the mixamo animation or the one that we moved behind the one with the mixamo animation and how did you that circle around the cursor when you were selecting the hair
@salfolio
10 ай бұрын
Add hair after your character is already animated. It’s less of a head ache. For the cursor, turn on the proportional editing button at the top (search it if you don’t know where it is)
Пікірлер: 114