Thank you for the video, it is an awesome walkthrough and I learned a lot about sketchup! Small but important thing to note using this method: Using the divide by function to copy the radial lines means the distance between the points on the surface of the sphere is equal, not the distance between the points on the icosahedron edge (the edge of the triangle). Although this will generate a geodesic dome, the geometry is slightly different from dome calculators like domerama. I wasn't quite sure how to use the divide or multiply copy functionality to split the icosahedron edges, so I just divided the edges into five parts and copied the radial length each time to the endpoint of the divided icosahedron edge. It was a bit more work, but resulted in the same geometry as domerama.
@islamicartist7681
2 жыл бұрын
Very informative and interesting. Thank you. Keep uploading these kind of videos 👏👏👏
@Acheiropoietos
6 ай бұрын
Very comprehensive insights. Thank you.
@cristhoferandrade3516
Жыл бұрын
man!!! you are insane!!! thanks for sharing!!
@LBGTR1
Жыл бұрын
At last understandable instructions, many thanks!
@cks2178
Жыл бұрын
Thank you man this video was very much helpful for me for my dome project.
@dawidchabior9777
Ай бұрын
Another way to achieve this is exporting ICOSphere from blender to collada format. Saves a lots of time.
@rraffaell73
Жыл бұрын
What a class! Thank you!
@tonyhawk123
Жыл бұрын
Thanks for an interesting video. I think there's an easier way to do this though. The most complicated part in the video by far is projecting the points (vertices) from the divided triangle onto the surface of the sphere. So another way to do this part would be as follows. Divide a triangle into smaller triangles (as shown in the video), then for each new point just draw a line from the sphere's centre to that point, then type in the radius length! The point should now be on the sphere's surface. Then repeat this for the other points, and once all the points are on the surface of the sphere just connect them with lines.
@30isurfer
Жыл бұрын
Thanks a million Tony! Very informative and detailed for dummy beginners like me.
@mil-fpv4931
Жыл бұрын
Yes, this is must easier way, at least for me.
@GooGoosDad
Жыл бұрын
Very, very good!
@mikemunro7223
Жыл бұрын
that's some great info, thnx
@coderrza117
Жыл бұрын
I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u
@coderrza117
Жыл бұрын
I hope you will continue to train creative architecture , on mega ubran projects , practical application step by step👍✔ And upload all what need tuto
@jimligon1460
Жыл бұрын
thanks... very good..... for a lay person, hard to follow, but I will get it.
@SmeeUncleJoe
7 ай бұрын
That's great for drawing them. Would you know if it could be upgraded to calculate member lengths and angles ?
@cryptocite3366
2 жыл бұрын
thank you Ali.
@madwani
Жыл бұрын
Not impossible but very difficult to follow. I got the main idea how to do it, but it needs deep concentration.... Thanks a lot.
@leszekkubiak9584
4 ай бұрын
good work
@waseem1183
2 жыл бұрын
Thank you so much
@amiralipirzadeh9556
Жыл бұрын
31:23 Instead of ctrl C then delete you can also use ctrl X(cut)
@martinacurto4459
Жыл бұрын
Can i do this with heither pentagon or hexagone?
@leventyukselen9063
Жыл бұрын
Thank you, like you, thanks
@eshosora9339
Жыл бұрын
Easier and faster way is with using mirror insted of (copy+ rotate) in all the oprrations...thanks alot.
@murtadhaarchitect322
2 жыл бұрын
Make course modeling + architecture presentation for support ❤️
@sking7219
6 ай бұрын
Initially when creating the first geodesic sphere shape, he creates the first two triangles and then presses x4 to create the rest on that side. When I do this it doesn't work, do I need to press something else at the same time?
@douglasrodriguez5530
2 ай бұрын
Genial
@myalmamyalma1314
11 ай бұрын
Ctrl alt v ??
@myalmamyalma1314
11 ай бұрын
0:39 size ????
@brigittevanholder2364
5 ай бұрын
why make it simple when it can be more complicated
@zorbeygucluismailgucluogul9470
Жыл бұрын
abonelik paralımı
@fandiiab4491
Жыл бұрын
kzitem.info/news/bejne/rqybk4RqoZ6cnX4 this video has the shortest way to create icosahedron, but his method to create 6v with plugin not quite accurate because it doesn't have equal radius on each vertice, yours is accurate..thanks
@hanily860
Жыл бұрын
MY BRAIN BLOWN ..😓
@thalescatao
Жыл бұрын
that is not a geodesic dome. The sides dont follow the common pattern of segment lenghts
Пікірлер: 36