These do not for the CRF50. I forgot the clutch is on the end of the crank on that model. While the pump itself fits, the pickup tube is too high and interferes with the clutch housing. Next batch I'm gonna try to see if I can get the tube to lay down lower so it will fit that engine. Not expecting to find a solution, but worth trying. I'll update here if I can get it to work👍
@daynuhbraps
3 ай бұрын
No worries thanks for the reply! How about for the gen 2/3 groms? I know the gen 3s have an issue as is, but would the high flow cause the bottom end to starve? [Stock motor]
@GromBeardo
3 ай бұрын
@@daynuhbraps Nope all good. I have all the gens of the Grom and all have high flows, no issues🤘
@josephsaucedo8691
Жыл бұрын
Hay buddy I just wanted to add a idea wear the oil screen at its not A bad idea to add/ put a Earth magnet in that cavity to it will catch all small metal partials that maybe in the engine oil it's extra pertection.😉🛠️💯🏍️🎇👍✌️ Great stuff keep it coming
@GromBeardo
Жыл бұрын
Yeah, there's no oil flow through that cavity anymore though. Wouldn't hurt, but it's not gonna see much oil. I have put filter screens on the ends of tubes and have people running those pumps on Groms, but it's a pain in the ass to make them, so I'm not offering them 🤪
@grumpystunts
Жыл бұрын
🔥🔥 Mine should be here Monday. Much better design than the plug on the CS one. And a hose and clamp 🤦🏻♂️
@GromBeardo
Жыл бұрын
Right, ha, ha. I saw that and was like, WTF!?!?
@grumpystunts
Жыл бұрын
@@GromBeardo I mean no hate on them they make some cool stuff but they rushed that pump capitalizing on the fact no one else made them. Either way stellar write up in the install 🤙🏼
@anglegrinder4630
4 ай бұрын
Hey beardo For the hole you have to drill on the side,how far do you drill?just a hole through the first wall?
@GromBeardo
4 ай бұрын
Hole is through the base and down into the cavity in the case.
@thegreatone582
Жыл бұрын
Great video.
@GromBeardo
Жыл бұрын
Thanks for watching and taking the time to comment! Appreciate you!🤜💥🤛
@Bananaips
18 сағат бұрын
Can I still? Ride it on trails or do I have to ride like a stunt bike?
@GromBeardo
12 сағат бұрын
I still ride mine on trails. Some worry about long down hill sections, but I figure the oil is gonna stay in the head at those times and the bottom end isn't really under load.
@daynuhbraps
4 ай бұрын
Would a high flow pump cause issues on a stock motor? Mainly for wheelies here. Thanks in advance!
@GromBeardo
3 ай бұрын
Nope. I have high flows in all my bikes, even the stock ones. I know a guy that hooks me up though🤪🤣 Never had any issues.
@soundsgood5824
4 ай бұрын
any way to order just the pipe?i have the yuminashi but saw this after
@GromBeardo
4 ай бұрын
Nope.
@connermonell9371
4 ай бұрын
Does this change how you change the oil?
@GromBeardo
4 ай бұрын
You need to change it more often, but it's changed the same way.
@outon2s
Жыл бұрын
Great video bro. I need to grab a pump or 2 off you at some point. I got a new 23 with an hr meter on it. What would you say the break in point is on the CRF 110 10hr?
@GromBeardo
Жыл бұрын
Yeah, like 10-12hrs is probably a good reference point for break-in. I'm not sure what Honda says as far as hrs.
@gromhub
Жыл бұрын
Pro tip 😂 Pro tip 2:05
@GromBeardo
Жыл бұрын
😁
@Tr3nt9_
Жыл бұрын
🔥🔥🔥
@GromBeardo
Жыл бұрын
🤜💥🤛
@Tr3nt9_
Жыл бұрын
@@GromBeardo I have 2023 grom, probably need to snag one soon.
@GromBeardo
Жыл бұрын
Awesome! I'll be here when you need one💪
@Tr3nt9_
Жыл бұрын
@@GromBeardo absolutely, thank you!
@gromhub
Жыл бұрын
I need a 110 now then is what your really telling beardo? 😅
Пікірлер: 32