CruzinMoto start installing the left mirror : focus has left the chat ....
@steelsporty
Жыл бұрын
The groove machined into the flats of the right hand mirror indicates that it's got a left hand thread. This is standard practice on L/H thread fasteners to save people from heaving on them in the wrong direction.
@shashank_mittal
3 жыл бұрын
Do you realize that you have threaded bars, which is why your stock bar ends were threaded? You replaced them with expansion sleeve inserts and that's an incorrect fitment. You should get threaded bar inserts for your bike that are compatible with bar end mirrors. As some other folks have suggested, Rhinomoto makes some and there are other brands too.
@dcolt5335
10 ай бұрын
This was helpful. Called up Rhinomoto and they are sending me bar end adapters. Thank you very much! This was very helpful! 🙌🏼
@dale-fi1fi
4 жыл бұрын
what I did on my throttle side is buy some washers so youcan put it real tight but still have to space away from the throttle
@Kajbaj123
2 жыл бұрын
They tell you specifically not to tighten them the way you have
@purgehappens
2 жыл бұрын
Hey have the driven d axis mirrors off rev zilla for my MT07 22 and where did you get that adapter for bar end can’t find one to fit just right when I back it out to tighten it up on throttle side ;/ ????
@StarCustom-pk5ff
4 жыл бұрын
Now you just need the block off screws for the original mount holes. They are on Amazon for like $13, they are aluminum so be gentle when putting them on.
@cruzinmoto
4 жыл бұрын
Sweet thanks for the heads up I wondered if there were screws to cap them off
@portis1965
4 жыл бұрын
Your video was a great help to me! Thank you
@sandstau
4 жыл бұрын
Guys can you flick the mirrors in traffic then back to the same position with out adjusting to correct position again.cheers
@cruzinmoto
4 жыл бұрын
Yes
@MrOpticKat
Жыл бұрын
I’m curious did you have to order 2 mirrors? As all the websites I’ve been on look like they only sell 1 mirror
@cruzinmoto
Жыл бұрын
Yes you have to buy 2 they are not sold as a set
@POPETINRacing
3 жыл бұрын
Bought the adapter on Amazon for $20 and it didn’t come with a screw nice
@cruzinmoto
3 жыл бұрын
That sucks lol try local homedepot
@POPETINRacing
3 жыл бұрын
@@cruzinmoto I will thanks lol
@armystrong123g
4 жыл бұрын
You should get Rhino moto bar end mounts Theo are Made for crg mirrors. Much safer en netter thee thia
@cruzinmoto
4 жыл бұрын
There site had a error and wouldn't process my card. So not buying them
@victorchen5090
2 жыл бұрын
which one should i get? because the ones made for mts dont fit the new model, should iget the one made for r1s?
@demetriospapavasiliou8167
4 жыл бұрын
How's the vibration in the bars now that you've removed the bar end weights?
@cruzinmoto
4 жыл бұрын
0 vibration
@bishalshrestha2379
3 жыл бұрын
Man where can I get Allen key like yours ?
@lovesautodetail
3 жыл бұрын
Thanks man.
@Itzp4tt
4 жыл бұрын
Where's the link where you got the adapter at couldn't find them.
@cruzinmoto
4 жыл бұрын
They are on Amazon under CRG mirrors adapter CRG Internal Mirror Adapter - --/-- www.amazon.com/dp/B001CI94DS/ref=cm_sw_r_cp_apa_i_7-3zEb0RV77SN
@kaimurray5656
4 жыл бұрын
I found you on a video about mortars, rad
@baba_smallz
3 жыл бұрын
Bought these from Wish for about 17 USD, came without a manual. Thanks for the video!
@cruzinmoto
3 жыл бұрын
Lol no you didn't
@multiban
3 жыл бұрын
No, definitely not.
@Tvalss
3 жыл бұрын
What size bar end did you get? 7/8 or 1"?
@cruzinmoto
3 жыл бұрын
7/8
@ToothlessCBR
4 жыл бұрын
That bike came with shorty shift levers :O
@cruzinmoto
4 жыл бұрын
No those are the ones off the fz07 I bought
@ToothlessCBR
4 жыл бұрын
On no report not the vary vary vary vary first install/mod :p
@cruzinmoto
4 жыл бұрын
@@ToothlessCBR this was supposed to be the first one but I accidentally did the 2nd one first
@DeanosAAAA
4 жыл бұрын
I recommend getting rhinomoto bar-ends which couples to oem *vibration damping bar inner- (if your bike has them, my r1 does), they are heavier than most oem bar-ends, and is a perfect fit made for crg mirrors it seems. without all that weight you gonna have shaky ass mirrors and tingly dead hands/fingers. Peace.
@captainmayday3361
3 жыл бұрын
Can u nut a link
@ruvdan
Жыл бұрын
yea add a link if you can
@hkbornin1995
Жыл бұрын
it comes with 1 pair for each or i need to buy 2 for a pair of mirrors?
@cruzinmoto
Жыл бұрын
Need to buy 2 they are sold separately
@hkbornin1995
Жыл бұрын
@@cruzinmoto thank you
@Jnlix_Cvstrx
Жыл бұрын
Def not paying that much for each and not get the adapters included lol. Call me broke i call it spending money wisely
@cruzinmoto
Жыл бұрын
I’m I big believe in get get what you pay for I’ve seen plenty of people with the knock of versions of these and they break easily. You get what you can afford
@chefriz5486
4 жыл бұрын
a piece! i was about to order i thought $107 for the pair!!! omg now i have to second think it... i have a 2019 mt07
@cruzinmoto
4 жыл бұрын
Yep 107 each totally worth it though. They fit on the mt07
@chefriz5486
4 жыл бұрын
@@cruzinmoto funny i would have thought 1 was missing from the package.. i just ordered 2 from rev. Going to look sick with my yoshimura fender elim and CRG clutch/break leavers.. what else are you going to mod?
@michaelschmidt4494
3 жыл бұрын
how can i remove them?
@jetstream_GS
4 жыл бұрын
Which adapters are you using?
@cruzinmoto
4 жыл бұрын
I think I said it in the video but they are from CRG same people that make the mirrors
@jetstream_GS
4 жыл бұрын
CruzinMoto that’s what I figured but I didn’t hear it, my bad!
@jetstream_GS
4 жыл бұрын
@@cruzinmoto do you know which part number you ordered? I got the CRG IA-300 7/8'' ones and they were just barely too big.
@UnburdenedByWhatHasBeen
2 жыл бұрын
oems are ugly but they actually work😂
@rodas_gsxs9780
4 жыл бұрын
Did you quad lock mount damage your phone camera
@cruzinmoto
4 жыл бұрын
Nope
@rodas_gsxs9780
4 жыл бұрын
CruzinMoto damn lucky my quad lock ended up messing up the stabilization on my iPhone 11.
@MrDeepseadweller
4 жыл бұрын
@@rodas_gsxs9780 They now have a dampener which they will send you for free if you contact them. It fixes the camera issue and is backward compatible with all QuadLock mounts (including the new wireless charging mount).
@rodas_gsxs9780
4 жыл бұрын
MrDeepseadweller damn im scared to try them again paid $500 to fix my phone the first time.
@MrDeepseadweller
4 жыл бұрын
Rodas_gsxs That’s odd. In Australia Apple will fix it for free or replace the whole phone if the camera is damaged from vibration.
@bikesandfamily3082
3 жыл бұрын
Is this a universal? Ty
@cruzinmoto
3 жыл бұрын
Yes
@bobfrankfurt9449
4 жыл бұрын
Why wouldnt u include link to bar end adapters on amazon.......
@cruzinmoto
4 жыл бұрын
Because I'm assuming people are smart enough to put 2 and 2 together sir and search it themself. People these days are too reliant on others to provide things easy to them such as links for things.
@diamondheat9
4 жыл бұрын
@@bobfrankfurt9449 well of course they would be lighter than stock bar weights....they are not bar weights by design. They are adapters to attach a mirror. Would think that would be self explanatory
@bobfrankfurt9449
4 жыл бұрын
@@diamondheat9 another moron commenting for no reason.
@moto_tech_braap_itout9852
4 жыл бұрын
Sturdy my ass they stay moving
@cruzinmoto
4 жыл бұрын
You probably didn't install them correctly then mine never move
@Aydam-mc2kh
4 жыл бұрын
When i am 18 years old i hope to meet you in the US
Пікірлер: 81