Chapters: 00:00 Introduction to Cricut Design Space 2022 01:55 Quick look at the LIVE or current version of Design Space 03:42 How to Switch to the Beta Version 05:15 Comparing the New to the Old
@Coral256
2 жыл бұрын
Thank you Delonda, for addressing the new changes in separate parts/episodes. With all the new updates that keep coming out, it can get confusing when everything is explained at once. I love your channel, and your tutorials are very easy to follow. Keep up the good work.
@CraftingwithDelonda
2 жыл бұрын
Thank you so much 😊
@brendaelliott3406
2 жыл бұрын
Hello Delonda, THANK YOU!! You have helped me soooo much in all your videos. I love that you explain everything in terms I can actually understand.... You are the 💣 of tutorials.... Thanks again!!! ❤️
@CraftingwithDelonda
2 жыл бұрын
Thank you very much 💙
@HeatherHunterJ
2 жыл бұрын
We are SO LUCKY to have you Delonda thank you 💯 as always we love it Dr Cricut 😉
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@pamelahall4556
Жыл бұрын
You are an amazing teacher! I just found your KZitem channel a couple of weeks ago and I have learned so much! Thank you!
@CraftingwithDelonda
Жыл бұрын
Thank you so much 😊
@ozellahardy4732
2 жыл бұрын
Hey Delonda. Thank you so much for this. I set mine to the new beta version right along with your video. Not sure if I'm ready for it or not but I wanted to jump in and stay in the loop with everyone else. Plus with you by our sides and helping us along the way I know everything will be alright. Thanks again ❤️
@CraftingwithDelonda
2 жыл бұрын
You’re welcome ☺️
@theresaforte2202
2 жыл бұрын
Hey Delonda I was waiting for your video on these updates! 😊 Thank you so much for simplifying this! You are indeed a teacher at heart! I’m looking forward to the breakdown of the other updates! ☺️
@CraftingwithDelonda
2 жыл бұрын
Thank you so much 😊
@marinavitale8803
2 жыл бұрын
Thank you for slowly introducing us to the Cricut updates. I really appreciate that you showing us in manageable small chunks. I’ve looked at other video tutorials and it’s way too much and extremely confusing. It’s best to assume your audience doesn’t have a degree in graphic design. There’s a reason a lot of crafters like Design Space. It’s user friendly and less intimidating.
@CraftingwithDelonda
2 жыл бұрын
You're welcome 😊
@lashundarice5869
2 жыл бұрын
I'm glad you are taking your time. I watched other videos and they are going so fast.
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@rhondarichard3333
Жыл бұрын
Thanks Delonda for always keeping us abreast!!! I’m playing catch up now since I’ve finally purchased most of my equipment 😂!!!
@CraftingwithDelonda
Жыл бұрын
You are so welcome!
@martymattoon7231
Жыл бұрын
Thankyou,thankyou. Your by far the best teacher.
@CraftingwithDelonda
Жыл бұрын
Thank you so much!
@anniesews
2 жыл бұрын
Thank you very much for this first tutorial on the new Design Space update.
@CraftingwithDelonda
2 жыл бұрын
You're welcome 😊
@hgilmw
2 жыл бұрын
Wow so glad you did this I been waiting for Cricut design space to change over itself not knowing how to go to settings and switch over to Beta. ❤ Thank you for showing this as always you are the BEST 😊
@CraftingwithDelonda
2 жыл бұрын
Thank you Aunt Wanda ❤️
@avongirl328
2 жыл бұрын
Thanks for showing the update in sections. Not as overwhelming.😊
@CraftingwithDelonda
2 жыл бұрын
You're very welcome ❤️
@Angel-TCCrafts2
2 жыл бұрын
This is a good one. I used the beta version today. I didnt use every new update features yet but i love it so far awesome. I cant wait to see the rest… thank you for your time😊
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@MayflowerBA9928
2 жыл бұрын
Great tutorial! Mine has not updated yet. Is it best to wait? I think you mentioned you can slice more than two objects, that would be interesting. Will wait for your other tutorials to see the changes. Please tell me you can do larger images on print and cut!?!? 😁
@CraftingwithDelonda
2 жыл бұрын
No bigger print then cut yet.
@lisacano5234
2 жыл бұрын
I got the update but wasn't aware of the beta. Thank you for sharing, it was very informative.😊
@CraftingwithDelonda
2 жыл бұрын
Thank you for watching 💙
@pattiminta6543
2 жыл бұрын
You make thinks so easy to follow. Thank you. Love your site.
@CraftingwithDelonda
2 жыл бұрын
Thank you very much 😊
@shugamamascreations4567
Жыл бұрын
Heyyyyyyy!👋🏽Delonda, How Are You Doing Sis? Thanks! For Sharing, I Need To Update Mines. As Always Stay Safe And Be Blessed!!!🙏🏽🙏🏽🙏🏽
@CraftingwithDelonda
Жыл бұрын
Thank you 😊
@staynreal4u
2 жыл бұрын
See this is the reason I keep coming back, I watched another vid, on the update and they nvr mention the rename option, thanks 🥰🥰🥰
@CraftingwithDelonda
2 жыл бұрын
Thanks for watching 💙
@AuthenticallyMe6837
2 жыл бұрын
Hi Delonda! New Subscriber here. Thank you for your helpful content!
@CraftingwithDelonda
2 жыл бұрын
Hi there, thank you and welcome aboard.
@SepiaSparkles
2 жыл бұрын
Thanks Delonda for always keeping us on top of things. ❤
@CraftingwithDelonda
2 жыл бұрын
Thank you so much 😊
@sharijohnson1873
2 жыл бұрын
Perfect! Thank you for doing this slowly. It makes more sense now. And I love that you can rename the layers! Mine still hasn’t updated to 20 yet, maybe I’ll be more prepared for when it does. 😁
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@phillipsfamilyadventures1165
2 жыл бұрын
Thank you for this tutorial update. 👍 I'm just waiting for the update where I can "Print Then Cut" larger without error messages or having to do work arounds. 🙏🙂
@CraftingwithDelonda
2 жыл бұрын
I totally understand that. Unfortunately this update didn’t include bigger print then cut.
@margarethopson9810
2 жыл бұрын
Thank you so much for this info. Really appreciate. Yes, give me baby steps 😄
@CraftingwithDelonda
2 жыл бұрын
You’re very welcome ☺️
@deborahworkman5329
2 жыл бұрын
Thank you! 😊 Can't wait for the next one!!
@CraftingwithDelonda
2 жыл бұрын
Thank you!
@notdoneonemore7872
2 жыл бұрын
Thanks you Thank you 🙏 for all you do Blessings
@CraftingwithDelonda
2 жыл бұрын
You’re welcome
@Reneasmallwood
2 жыл бұрын
This was great information. I wasn’t looking for updates, but happy to explore options. Thank you
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@charlenefiumara333
2 жыл бұрын
Thank you! Great tutorial.
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@candacelacy1564
2 жыл бұрын
Thank You SO Much for this video!!!❤
@CraftingwithDelonda
2 жыл бұрын
You’re very welcome 😊
@Faith-qp8us
Жыл бұрын
Just found you..very pleasant teacher
@CraftingwithDelonda
Жыл бұрын
Thank you so much 😊
@kimmiejones440
2 жыл бұрын
I like this update. Thank you for the lesson help
@CraftingwithDelonda
2 жыл бұрын
You're welcome 😊
@dorcascaniz6709
2 жыл бұрын
wow thankyou i appreciate your great, i wondering when are you going to do more videos on the StarCraft 12" x 15" 8 in 1 Swing Away Heat Press - Silver i saw the one when you received it and the cup but no more i hope you still like it cause i order my it gets here tomorrow, your video have help me a lot your great to follow. thanks a lot
@CraftingwithDelonda
2 жыл бұрын
Thank you! I will add one in next week.
@kcarrot2002
2 жыл бұрын
Love your tutorials
@CraftingwithDelonda
2 жыл бұрын
Thank you 😊
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@calmandcollected6021
2 жыл бұрын
So far so good. Can’t wait to see how to use the Combine button. Thank you Delonda
@CraftingwithDelonda
2 жыл бұрын
You're welcome 😊
@laineincolor6937
2 жыл бұрын
Great tutorial!! I’m going to try Beta. I really like the rename feature. 🎉
@CraftingwithDelonda
2 жыл бұрын
Thank you! I like it too!
@sheilagallop1190
2 жыл бұрын
Good evening I enjoy the training you gives. Step by step, my trouble is I have a Air 2. Seems like it's not connecting to print. It's not under the Maker section
@CraftingwithDelonda
2 жыл бұрын
Is your printer connected to your computer?
@sheilagallop1190
2 жыл бұрын
Yes it was connected. I will reinstall and see
@sheilagallop1190
2 жыл бұрын
Ok...I made sure everything is pushed in good. Still say connect your maker. I've been doing the same way
@kellydelvecchio9005
2 жыл бұрын
Delonda, where do I find the other tutorials on the changes?
@CraftingwithDelonda
2 жыл бұрын
Still working on them.
@joyceprice-harvey9272
2 жыл бұрын
I love this, Thank you
@CraftingwithDelonda
2 жыл бұрын
Thank you 😊
@craftycornerplace
2 жыл бұрын
i was so confused but watching your channel made it easy its still a lil confusing but i will get it. 😂😂😂😂😂so much to learn.😂😂
@CraftingwithDelonda
2 жыл бұрын
It’s definitely a lot to learn.
@Beautyfauxthingsandbling
2 жыл бұрын
Wow Thank you 😊
@CraftingwithDelonda
2 жыл бұрын
You’re welcome.
@cecem1430
2 жыл бұрын
I like this.
@CraftingwithDelonda
2 жыл бұрын
Thank you so much ❤️
@jessiegibson9023
2 жыл бұрын
Good video thanks
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@bernettamoss5718
2 жыл бұрын
Hello All from NC
@cecem1430
2 жыл бұрын
I live in North Carolina also.
@wendiwallace9941
Жыл бұрын
Delonda, I just updated my Design Space for my IPad and my version is only 5.22.0, could this be right? I am doing an HTV design with 3 colors and I cannot figure out how to do Beta mode on it.
@CraftingwithDelonda
Жыл бұрын
Let me check on my ipad.
@CraftingwithDelonda
Жыл бұрын
My IPad only updated to version 5.21
@cecem1430
2 жыл бұрын
I need help using my Cricut Joy machine. 🎉😊😊😊😊😊😊
@CraftingwithDelonda
2 жыл бұрын
As soon as I get one, I will help you!
@lindalowery6153
2 жыл бұрын
Hello Delonda!!!
@CraftingwithDelonda
2 жыл бұрын
Hi there!
@Jaden_856
2 жыл бұрын
I think I'm staying with the old unless print n cut is bigger n having a Xtra eraser on our tools then lol but na I'll be staying with old version Lol thank you
@CraftingwithDelonda
2 жыл бұрын
I totally understand
@ruthybarretta7955
2 жыл бұрын
Hi from Ohio
@carnellgeorge2903
2 жыл бұрын
I need help with sawgrass’s 00
@CraftingwithDelonda
2 жыл бұрын
Ooooh, that's out of my budget. I have an Epson ET 15000
@Jaden_856
2 жыл бұрын
Hi great video but I don't think they needed to mess with that part all they had to do is let us make print n cut bigger that's it it's a mess now thank you
@CraftingwithDelonda
2 жыл бұрын
I agree and you’re welcome
@prosperity.
Жыл бұрын
I don't understand, so they removed the color of each design in the panel, which you can clearly see the colors! to now you have to name the color, also what happen to the curve button? I only have one ribbon on top not two anymore. So confusing. Not a fan!
@CraftingwithDelonda
Жыл бұрын
I haven’t noticed that curve is missing. I’m definitely going to check on it when I get home. In the layers panel, I can still see all the colors. I love the fact that you can rename the layers. I really like the pieces that I have played around with so far.
@prosperity.
Жыл бұрын
@@CraftingwithDelonda I figured out the curve button, But for some reason I'm unable to see any color it's all grey. I've been experiencing some problems with design space. When I open the word box and start typing the whole program shuts down. I've tried multiple times... Idk why? but I love your content keep them coming❤
@CraftingwithDelonda
Жыл бұрын
Oh no! Yeah, I found the curve button when I got home. What version of Design Space are you using?
@darlenevenus4398
2 жыл бұрын
I feel this new update is confusing
@CraftingwithDelonda
2 жыл бұрын
It can be. That’s why I want to do one step at a time.
@HillCntrySkies
2 жыл бұрын
Why, why, why do they want to make me lose my mind with updates 🥲. Thank you for helping us step by step. ❤
@CraftingwithDelonda
2 жыл бұрын
You’re very welcome. I will never forget what it felt like to learn all of those technical terms that I don’t use anywhere else, lol! I am going to break it down as much as I can.
Пікірлер: 112