...Well done,....I was given a fairly beat up older 1322...there was a .22 bullet stuck in the barrel and the muzzle was horribly beaten up.....I stripped it down and resealed it, put on the 1399 stock and chose a new 14" barrel rather than re-crown the original ....I find this combo works great, being not unwieldy as with an 18" barrel or longer....I prefer the 'speed' of open sights as I do a lot of ratting at a close distance....One thing, the front band can be opened up slightly to slide through a longer barrel,...I did this first, then opted for a 760 barrel band and found the cocking arm would contact it while pumping and, of course, move the barrel....I removed a lot of plastic off both the barrel band and the cocking arm to alleviate this....Just a fore warning....John (west coast,Can.)......( it now hits very hard and is very accurate)
@jake4194
3 жыл бұрын
A folding stock would be awesome!
@agunther08
21 күн бұрын
A folding stock is awesome- my 1322 is way better now… i went with buck rail.
@bruceallen6016
3 жыл бұрын
Thumb up for posting chrono results per pump. Much appreciated.
@ThrHillSeeker
3 жыл бұрын
Thanks for commenting! I've finally got a flat top piston on the way so will do an installation video soon then more power tests.
@bruceallen6016
3 жыл бұрын
@@ThrHillSeeker I'm really interested in 1377 mods and results. Thanks.
@chentequilichini7182
3 жыл бұрын
great guns got quite a few projects of those , lots of accuracy and lot of fun!
@Podcastforthewin
3 жыл бұрын
Good video. Merry Xmas or happy holidays
@ThrHillSeeker
3 жыл бұрын
Thank you and a Merry Christmas to you too!
@blademan175
Ай бұрын
You had me at air guns, subbed!
@MrWeda2
3 жыл бұрын
Hello! Thanks for the detailed information. Sincerely, Alexander.
@ThrHillSeeker
3 жыл бұрын
Thanks for commenting! I'm glad you found the video helpful.
@CharlesNolanArt
3 жыл бұрын
Hello, you have the ideal voice and temperament to do these videos, I thank you, I am interested in the lighter spring and also I want to see the barrel removed. Very good video.
@ThrHillSeeker
3 жыл бұрын
Hi Charles, thanks for commenting! That's really nice feedback. I haven't had much time to film lately but I have some time off work soon so will make some more videos with this gun then.
@PeterAgostiniJdcap26
2 жыл бұрын
Bore sight in your scope again. Check your scope mounts. Good 👍🏻 video. Yes would like to see the internal modes on this rig .
@braddenty503
Жыл бұрын
Wow a rifled barrel? Really? Awesome! That little tid bit of info might have just sold me.
@DL101ca
Жыл бұрын
They come with rifled barrels from factory, that's why they only shoot pellets and not BBs. A longer barrel will offer more accuracy.
@N0B0DY_SP3C14L
2 жыл бұрын
Decent recommendations. I do wish you'd mentioned at what range you were shooting those targets. Or perhaps you did and I missed it, somehow. Definitely good advice for using as a teaching tool for others.
@bayouflats5054
2 жыл бұрын
I got confused at beginning when you showed the transfer port mod. You mentioned drilling out the orifice, but you wanted to remain stock. So, is the new transfer port the same O.D. ( outside diameter) as the original? Just the I.D. Is larger by way of a thinner wall on the new port insert?? Thanks
@933pilgrim
2 жыл бұрын
Please provide links for all modifications you did.
@briandix216
Жыл бұрын
What power is it generating with the increased transfer port ?
@langgbob
2 ай бұрын
Hi, I noticed you push the Bolt in real fast ,,, When I switched over to the steel breach, my pellet would get stuck before it goes into the chamber, does your steel breach give you that problem? It seems to get stuck on top of the screw ,that you said that you switched yours to an Allen head screw
@jet3767
3 жыл бұрын
hey again ! btw that looks like an air pistol with an arm brace
@XCougar85X
3 жыл бұрын
Nice video mate. Have a stock one myself. Will likely add the stock myself and go for a weaver rail mod, so i can swap sights with the Umarex Buck Mark. Would say, i think it really did not like your pellets. As with the right pellet it can easely put hole on hole, this thing has nearly match pistol accuracy with the right pellet. I was quite surprised that it didn't provide more power with that transfer post upgrade tbh. I expected it to be quite a bit over 600fps with that upgrade.
@ThrHillSeeker
3 жыл бұрын
Thanks for commenting! Sounds like a good project. Yeah, the spitfire pellets are awful but they were all I had that day. Now we're coming out of lockdown I'll be able to get out and stock up on more JSBs. It's a pretty old gun and I don't know what the previous owner did (or failed to do) to it, so the valve might not be in great shape.
@XCougar85X
3 жыл бұрын
@@ThrHillSeeker Indeed, it may be leaking a little, not too uncommon, mine does so too. From 6pumps up i always feel a slight rush of air over my trigger finger. That said i mostly just shoot 3-5 pumps. Plenty for my little range
@brandongoutdoors
Жыл бұрын
@@XCougar85X what pellets work with your 1377?
@XCougar85X
Жыл бұрын
@@brandongoutdoors Exite Hammer work fantastic on mine
@brandongoutdoors
Жыл бұрын
@@XCougar85X thanks
@MrVintagePlant
3 жыл бұрын
Well worth watching keep up the great work, Do you have any intention of changing the barrel in the future (not trying to spend your money). I would also like to see figures on the trigger spring, you may have seen a video with a trigger being fired by a feather Dangerous. Best Regards, David
@ThrHillSeeker
3 жыл бұрын
Hi David, Thanks for your kind words. I've considered swapping out the barrel but I quite like how easily it can be reverted to a pistol. I might still pick one at some point. If I can get hold of trigger pull gauge, I'll get some measurements and make a video.
@curacaoz2875
3 жыл бұрын
At 16 minutes, what is the number on the red dot sight u have there? Can it be used on the barrel?
@ThrHillSeeker
3 жыл бұрын
Thanks for commenting and for subscribing! Sorry, I'm not sure I fully understand your question. The red dot sight is branded Field Sports and isn't magnifying but has 4 brightness levels. The SMK scope is 4x20. Both can be mounted onto the barrel using the dovetail adapters shown at 3:27 but they tend to move around even when very tight. I hope this answers your question, let me know if not. Happy new year!
@davidno1minton997
2 жыл бұрын
Bad,ass,gun
@davidtseng5565
Жыл бұрын
It is similar to 2289G. My 2289 equipped with 3-9x40 scope can shoot .22 pellets around 490fps.
@MONKEY-vi7hx
6 ай бұрын
How accurate are they with decent pelkets at 15-20m?
@kirawayway8458
26 күн бұрын
Can you add links to where you purchased the mods?
@John..18
3 жыл бұрын
Did I miss it, ? What was the distance you were shooting at, ???
@ThrHillSeeker
3 жыл бұрын
My bad, I don't think I mention it in the video. Shooting was at 12 meters. Not my finest work I'll admit, hence the long list of excuses.
@ScottHz
3 жыл бұрын
@@ThrHillSeeker I put a Lasso 4x scope on my stock 1322 with the Crossman Intermounts (I added a rubber shim to keep it from slipping. I was amazed how how I was instantly able to get 25-35mm groups at 10 meters - perfect for squirrel eradication! I’ve just upgraded by adding the stock and a 14.6” barrel. Would like to get the transfer port upgrade and steel breech next.
@ThrHillSeeker
3 жыл бұрын
@@ScottHz Very nice indeed. The steel breech is well worth having imo. I've just bitten the bullet and fitted a flat top piston and valve. There'll be a video of it out on Thursday.
@TheWhole36
3 жыл бұрын
Could you tell me where I can get a longer barrel for my 1377
@ThrHillSeeker
3 жыл бұрын
Hi, gmac custom parts sell 18" and 24" barrels for £40 and £44 respectively but it looks like they're out of stock right now. Their customer service is pretty good so you could email and ask when they might have some in. If you're in the UK, bare in mind that air rifle barrels have to be collected in person, sent to a RFD or posted in exchange for your old barrel.
@CharlesNolanArt
3 жыл бұрын
@@ThrHillSeeker I bought a 12-inch barrel on eBay last night. He has all sizes just search 1377 barrels on eBay.
@ThrHillSeeker
3 жыл бұрын
@@CharlesNolanArt Unfortunately airgun barrels have to be sold in person by an RDF in the UK (the same as whole airguns) which makes modding a bit more difficult.
@MilledSteel
Жыл бұрын
I’ve gone full circle where I now prefer more of a stock pistol or carbine with iron sights for the most part
@randyhardy3692
10 ай бұрын
Wonder why yours is so much off on power..my 1377 3 shot chroni tests were with a 7.9 g cphp pellet was 3 pumps 388/373/375 ..5 pumps 455/459/462 ..8 pumps 532/541/531 ...10 pumps 562/565/568...12 pumps 592/595/594 ...15 pumps 625/616/621 ..20 pumps 636/640/637 ..all ive done was steel breech and cleaned the barrel on it ..wonder why ours varies so much
@Supracrm
3 жыл бұрын
You would love the co2 pistol version LOADS of options with that one and lots more power! Ive got 2 I keep playing with.... good vids
@ThrHillSeeker
3 жыл бұрын
I've shot a friend's 2240 and was impressed but I can't really justify buying another gun when I hardly shoot the ones I already own. Maybe once the ranges I use reopen...
@Supracrm
3 жыл бұрын
@@ThrHillSeeker You can never have to many guns! Lol
@ThrHillSeeker
3 жыл бұрын
@@Supracrm Haha. While I share that sentiment, I'm not sure my bank account and my better half would agree.
@ScottHz
3 жыл бұрын
@@ThrHillSeeker One way to save money - print your own targets ;)
@DL101ca
Жыл бұрын
@@ScottHz Or go to the range and shoot other people's targets...😂
@sportsandautomotives4739
2 жыл бұрын
Hi ....Crosman 1377 vs Benjamin trail Mark 2 air pistol 🔫 Which best for small game & bird's pigeons hunting ? Please reply.... I want best Air pistol for hunting...
@ThrHillSeeker
2 жыл бұрын
I'm probably the wrong person to ask. I've never shot a Benjamin Trail Mark 2 and I only really shoot paper targets. I can however say that, with the modifications I have done, the Crosman 1377 can achieve the maximum legal air pistol power (6 ftlb) and very good accuracy. Always remember the importance of close range and shot placement when hunting with air pistols.
@sportsandautomotives4739
2 жыл бұрын
@@ThrHillSeekeryes... Ok... 👍 Thank you so much for replying to our comment 🤝...
@egoldstraw6952
2 жыл бұрын
Can I have your brown grips?
@murfspop
3 жыл бұрын
Try the 1.1# sear from Arizona Airguns. Buy 2 .You will want to convert a 2240.
@ThrHillSeeker
3 жыл бұрын
Thanks for the recommendation. Unfortunately they don't ship to the UK. I might still get in uprated steel sear from gmac. PCP conversations for the 2240 are hard to come by here too because of the 6 ft.lb limit but I'll be on the look out for one!
@ScottHz
3 жыл бұрын
@@ThrHillSeeker 6 ft.lb. limit!? How do they expect you to dispatch squirrels and rabbits?! ;)
@ThrHillSeeker
3 жыл бұрын
@@ScottHz I know, it's a shame. No one really hunts with air pistols in the UK except for dispatching rats at near point blank range. It would be inhumane to try.
@dudespin
2 жыл бұрын
Looks like bobba fetts gun
@Ross13ful
Жыл бұрын
Try different pellets it will probably change the fps and pump it 10 times
@SF_Curious
Ай бұрын
If you don’t leave any links on the mods then is useless for us looking to upgrade
@johnnylightning5633
2 жыл бұрын
WOW, umm so many mods for this airgun I REALLY hope you Brits have ebay... good vid but update it bro..
@rolandomartinez9299
3 жыл бұрын
It’s actually called a carbine an why call it black stock when it only comes in black?
Пікірлер: 70