I don't need to see your face. just keep the camera on the frame and don't jerk it every 1 second.
@jamesn9139
Жыл бұрын
I might have missed it but do you have to build have to builg on top of a sub foor? I have 5/8" wood flooring that is glued down on top of gypsum
@CavitySlidersUSA
Жыл бұрын
Hi there! Thank you for your question. All of our formulas are based on installing the Cavity Slider on the subfloor. When installed per the instructions, the door will have a 1" clearance to the substrate floor. Our recommended clearance is 1/2" when the floors are installed. To achieve this with an already installed floor, you will need to trim the vertical extrusions of the pocket frame accordingly. If you need help calculating this or have any questions, please feel free to call our customer service team at (888) 466-0030 or email us at info@cavitysliders.com. :)
@toddtoo971
Жыл бұрын
All you need is an engineering degree and you can put this pocket door in really easy. Way to make something hard way harder.
@jessicahughes6964
Жыл бұрын
This may be a dumb question but I have a mobile home and I am wanting to use sliding doors, would this fit a standard mobile home door frame?
@CavitySlidersUSA
Жыл бұрын
Not a dumb question at all! The CS Cavity Slider Pocket Frame can be cut down on-site to fit your space. On the first page of our instructions, we provide a formula to calculate your rough opening to prep your home. From here, you can use the Extrusion Cut length formulas, also listed on the front page, to determine the length you should cut your back stud, jambs, track, slats, and fixing blocks. Check out our other assembly/installation video for more details on framing your rough opening and preparing your kitset: kzitem.info/news/bejne/sGp5qIeafKWcmJw If you have further questions, please feel free to call us at (888) 466 0030 or email info@cavitysliders.com, and we'll be happy to assist!
@orielalmeida8016
Ай бұрын
I Installed mine, it works well (single closing) but to open the door is hard...like I have to do a lot of force to reengage the mechanism...any tips is a dummy door that is really, thx
@pocketsoundpictures
Жыл бұрын
Since cavity sliders don't provide a door, how about showing how to prepare a solid core door and then attaching that to the frame? Every video skips over that and it would be VERY helpful. thanks!
@CavitySlidersUSA
Жыл бұрын
Hi there! Thank you for your comment. To prepare your door, please check out our other installation video that will show you how to attach your mount plates and hang your door in the cavity: kzitem.info/news/bejne/sGp5qIeafKWcmJw For further troubleshooting, please give us a call at (888) 466 0030, and we'll be happy to walk you through!
@artdeco5464
Жыл бұрын
would also be nice to see them installing drywall... instructions are great but seeing it done smooths out the learning curve
@AmandaJV248
9 ай бұрын
@@artdeco5464 agree that would be useful - as would be breaking down an existing drywall to install a cavity door frame.
@CasperDigital
6 ай бұрын
We just recently got it installed with soft close, but opening the door is so hard, while pulling back, first it gets stuck at activator and then when you pull hard to open, it hits the back stud really hard. so disappointed.
@orielalmeida8016
Ай бұрын
HI! this is happening to me too, did you find any solution ?thx!
@jerryleejohnsonjr1377
Жыл бұрын
Where do I find the trim kit for this unit?, does it need to be special made by a door shop?
@CavitySlidersUSA
Жыл бұрын
Hi there! Thanks so much for your question. On page 10 of our instructions, we provide a suggested wooden jamb detail to be installed with our frame. Many commercial trim kits are also compatible with the CS Cavity Slider. For recommendations, feel free to give us a call at (888) 466 0030 or email us your door specs at info@cavitysliders.com. CS Cavity Slider Instructions: www.cavitysliders.com/Portals/7/PDFs/Installation%20Instructions/Cavity%20Slider%20Kitset%20Installation%20Instructions.pdf
@bradcouden
Жыл бұрын
excellent explanation thank you
@joenotarantonio6149
Жыл бұрын
Just ordered a kit for my new addition. Can't wait to have it installed! Looks much better than your standard door kit.
@CavitySlidersUSA
Жыл бұрын
Excellent! We would love to see photos/videos of the completed installation! ☺
@joenotarantonio6149
Жыл бұрын
@@CavitySlidersUSA Absolutely! And please get into a vendor in RI! I had to order a kit for my house but the closest vendor was in the Boston area. Hoping a local place picks you up
@TheSquidmark
Жыл бұрын
I am looking to create a more solid pocket wall. So I bought your 4" wall frame kit with the intention of furring it out to 6". I plan to add 3/4 plywood to each side of the 4" frame for extra sturdiness, and then drywall over that. Any advise on how to do this, for example, how to attach the plywood so nothing warps or rattles?
@CavitySlidersUSA
Жыл бұрын
Hi there! In this commercial project, it was furred out with 1/4" drywall on either side: kzitem.info/news/bejne/t59juXykp4WZpqQsi=ZsRDj5LAwr7nW1K2&t=45 If you need further assistance you can reach out at (888) 466 0030 or email us at info@cavitysliders.com
@franciscovaldez8709
Жыл бұрын
If my rough opening is 99 inches and the CS frame assembled height is about 99 11/16” Can I cut the vertical pieces 1 inch and still be good without having to redo the rough opening?? I bought 2 frames got lucky and one door RO was a 100” the other 99” 😅
@CavitySlidersUSA
Жыл бұрын
Hi there! Thanks for your comment. Our pocket frame can be cut down to size based on your Door Width and Door Height. Check out the "Sizes" tab on our CS Cavity Slider page here: www.cavitysliders.com/Products/Pocket-Frames/CS-Cavity-Slider-Pocket-Frame to see the lengths you should cut your extrusions, or you can use the formulas on the first page of our installation instructions to calculate this manually. If you have further questions, please call our customer service line at (888) 466 0030 or email us at info@cavitysliders.com, and we will be happy to troubleshoot!
@Sean-y8f
5 ай бұрын
Thank you. I might be in love. lol
@jamesbrock36
10 ай бұрын
How far off the end of the door is the mounting plate bore?
@CavitySlidersUSA
10 ай бұрын
Hi there! For Mountplate placement, check out our full installation video here: kzitem.info/news/bejne/sGp5qIeafKWcmJwsi=Dp4EQM8RsvPTyjun&t=566 If you have further questions, call us at (888) 466 0030, and we'll be happy to assist.
@91ryangentile
Жыл бұрын
Still not clear directions
@CavitySlidersUSA
Жыл бұрын
Hi Ryan! If you're looking for more resources on how to assemble and install the Cavity Slider Pocket Frame, please check out our full assembly and installation video: kzitem.info/news/bejne/sGp5qIeafKWcmJw. If you still need help, please contact us, and we'll be happy to assist! Call our team at (888) 466 0030 or email us at info@cavitysliders.com, and one of our specialists can walk you through the process.
@91ryangentile
Жыл бұрын
Well I figured it out and come out great
@franciscovaldez8709
Жыл бұрын
If my rough opening is 99 inches and the CS frame assembled height is about 99 11/16” Can I cut the vertical pieces 1 inch and still be good without having to redo the rough opening?? I bought 2 frames got lucky and one door RO was a 100” the other 99” 😅
@prdwite6992
Жыл бұрын
Does it come with the slow close and rollers?
@CavitySlidersUSA
Жыл бұрын
Hi there! Thanks for your comment. We offer both standard and Sofstop (soft close/soft open) Carriage packs to be paired with the Cavity Slider Pocket Frame. If you are using the CS SofStop, there are minimum door width requirements depending on if you'd like your door to soft open, soft close, or both! Check out the last page of our overview brochure for the list of door widths: www.cavitysliders.com/Portals/7/PDFs/Brochures/2021/CavitySlider-PocketFrame-KitSet.pdf If you have further questions, feel free to call us at 888.466.0030.
Пікірлер: 32