I'm so glad I did this install! We can now start tuning the F33 and have confidence that we've got a great infrastructure in place for the added boost. :) ⬇️PRODUCTS USED 🛒 Get your CSF Front Mount Intercooler here ↙️ ↙️ www.kiesmotorsports.com/products/csf-front-mount-intercooler-for-bmw-m2-m235i-328i-335i-428i-435i-f87-f22-f30-32-n55-n20-engine?variant=18067806748787 Get your FTP Charge/Boost Pipe Combo Package here↙️ ↙️ www.kiesmotorsports.com/collections/engine-exhaust/products/ftp-f2x-f3x-n55-charge-pipe-boost-pipe-combination-packages?variant=29558204039283 V-Brace Paint Dupli-Color Ocean Blue: amzn.to/2GcgCUA Dupli-Color Clear Coat: amzn.to/3nck1Dc Cquartz Ceramic Coating: amzn.to/3nfB7A4 ⬇️TOOLS 🛠 Digital Torque Angle Wrench: amzn.to/36svHfp 60pc Torx set: amzn.to/2Gqv3UB Right angle attachment: amzn.to/2HTixOb Loctite Blue 242: amzn.to/3cTQBVK Trim Tool Set: amzn.to/33iJkM1 Dewalt Cordless Drill: amzn.to/2Goc7Ge Dewalt Mechanics Tool Set 247pc: amzn.to/3n91tUF
@kyriekristian2933
3 жыл бұрын
sorry to be so offtopic but does any of you know a tool to get back into an instagram account..? I was dumb lost the account password. I would appreciate any assistance you can offer me!
@harveycaiden8644
3 жыл бұрын
@Kyrie Kristian Instablaster =)
@kyriekristian2933
3 жыл бұрын
@Harvey Caiden Thanks for your reply. I got to the site through google and I'm in the hacking process atm. I see it takes a while so I will get back to you later with my results.
@kyriekristian2933
3 жыл бұрын
@Harvey Caiden it worked and I actually got access to my account again. Im so happy! Thanks so much you saved my account!
@harveycaiden8644
3 жыл бұрын
@Kyrie Kristian No problem :D
@KiesMotorsports
4 жыл бұрын
Great job! You’re doing awesome with your videos!
@fthirty3
4 жыл бұрын
Thank you so much, that means a lot!
@essence9392
4 жыл бұрын
Just ordered about 3k worth of parts for my F30 off of your website. Cannot wait to get them installed into my F30! Thanks so much for your stellar content on this platform and inspiring me to add some power to my Bimmer! 💪🏼
@Dark_whisper_92
3 жыл бұрын
Finally found F33 DIY Guy. I've been looking for this. Much appreciated for the detailed demonstration. Well done !
@fthirty3
3 жыл бұрын
Thanks! Glad to have you here 👍 I created this channel because there wasn't any F33 content put there. Glad you found this video helpful! 😀
@madreus
2 жыл бұрын
Thank you! Just followed your video to install the 5" VSRF IC. This is the only F33 guide I could find. Thank you!
@fthirty3
2 жыл бұрын
Glad my video helped! More F33 content is on the way 👍
@AdamLaceyGolden
2 жыл бұрын
Just brilliant idea to use a jack to help place the intercooler into position as you need to mess with improvised hardware. #12 1 inch screws work great, used a small door hinge as a rectangular washer. I didn't remove the front bumper and ended up cutting slits in the bottom cowl to fit in the new intercooler. This can be repaired with JB weld if it really bugs anybody. Great video.
@BR-xh1ql
3 жыл бұрын
Can someone please explain what the vacuum hose on the chargepipe does? Because it goes strait to the air filter intake tube. Does it not make the car loose boost as some of pressure is going strait in to the air filter pipe?
@xjship
10 ай бұрын
Just bought a f33 and am loving this content. You were able to fit that CSF intercooler which I believe is 6.5” thick without modifying the front support brace? From a bimmerpost thread I read, it looks like I need to go with 5” intercooler or I’ll have fitment issues.
@fthirty3
10 ай бұрын
Hey, welcome to the F33 club! Glad to have ya :) No fitment issues at all with the 6.5 inch. It's a tight fit, but no modification needed.
@carsonkresevich1136
3 жыл бұрын
Great video well explained
@fthirty3
3 жыл бұрын
Thanks! 👍
@drkwsherrill
2 жыл бұрын
Appreciate the effort, but I have the same car and you can drop the intercooler out the bottom after removing two screws. No front clip removal is required. Likewise, the charge pipe can be taken apart in the middle and removed through the top or the bottom of the car. You likely could have removed the Z braces by simply removing the grill covers and reaching through to loosen, then removing them through the bottom once the intercooler was out.
@fthirty3
2 жыл бұрын
Not sure how that's possible. The brace on the bottom completely blocks the intercooler and has to be removed. The stock charge pipe is one large plastic piece. There's no way to take it a part from the middle. There's not enough room to take the v brace out via grills. You could wrap them from there but not paint them. Maybe your car wasn't stock when you purchased it? Not sure. 🤔
@glacierf309
3 жыл бұрын
Noticeable difference in drivability from before and after? Got the same charge and boost pipe. Have you tuned it yet?
@fthirty3
3 жыл бұрын
I did notice that the throttle response was a lot better with less turbo lag and just overall more smooth. I did tune it using BM3, just haven't done a video on that yet. Tuning made a HUGE difference. :)
@davidpham7543
9 ай бұрын
@fthirty3 I want to upgrade my F33 as well but I couldn't fit the aftermarket intercooler because of that lower V-brace, does it fit when I take it off first and then reattach it? I was reading some threads about this and people said the intercooler does not fit and that they might need to refabricate it..
@fthirty3
9 ай бұрын
Mine fit without issue, I did remove the lower brace before installing it. Maybe that's your issue? I can confirm that it does indeed feet though.
@davidpham7543
9 ай бұрын
Thank you! I will try this and see, if not I will refund and just grab the CSF since your video was so helpful! Because right now I just received my ARM product and it was pretty cheap so thats why I went this route! @@fthirty3
@SensezzzTv
2 жыл бұрын
So if I have a 2014 435i Xdrive F32 I can go a bit more bigger for competition purposes, since we dnt have that plate ? … there’s a few out there a big bigger.
@fthirty3
2 жыл бұрын
Yeah, you should be able to if you've got an F32. The F33's brace on the bottom restricts the size of the intercooler.
@SensezzzTv
2 жыл бұрын
@@fthirty3 thank you!
@fthirty3
2 жыл бұрын
Glad to help 👍
@cal79
4 жыл бұрын
Have you removed your rear headrests ? I did asitlooks betterwhen wind deflector fittex..what did you bung the holes with if so?? cheers
@fthirty3
4 жыл бұрын
Good Question, I need to leave the headrests in because my daughter sits back there :)
@NightmarishPT
2 жыл бұрын
Does the f33 bring the vbrace only on 435? My 420 doesnt have it from stock
@fthirty3
2 жыл бұрын
Thats a great question. I know the 428 and 435 have it stock. I looked up a few photos of the 420d and it looks like in the photos atleast that they also include the upper and lower vbrace. Did you get your f33 used?
@NightmarishPT
2 жыл бұрын
@@fthirty3 it came to my hand used indeed. I need to check closer if it had or something. Should be visible in the attachment points.
@fthirty3
2 жыл бұрын
You should see attachment points under the car. Even non f33 4 series models can accommodate this setup, so I suspect that you'll be able to install the lower plate and v brace without issue
@stormtrooper.g83
3 жыл бұрын
Can I fit the intercooler in without removing the front bumper and the f33 v brace? Can I just do everything by jacking the car up?
@fthirty3
3 жыл бұрын
You should be able to yes. I only removed the braces because I wanted to paint them. 👍
@stormtrooper.g83
3 жыл бұрын
F Thirty3 awesome sounds good!!!
@cal79
4 жыл бұрын
Hi...I just fitted a stepped intercooler to my 435d f33...updating the remap this week and she should be at 401bhp and 730 tq.... keep up the great vids
@fthirty3
4 жыл бұрын
Nice!
@djay90547
4 жыл бұрын
Do you need a tune for those mods?
@fthirty3
4 жыл бұрын
Nope, no tuning necessary!
@yankiyuksel
3 жыл бұрын
Is this an xdrive 435i or just the rear drive?
@fthirty3
3 жыл бұрын
This is a rwd 435i
@CreationTV903
4 жыл бұрын
Very good #pandaplus
@fthirty3
4 жыл бұрын
Glad you enjoyed the video!
@CalmingVibes
4 жыл бұрын
loved it wanna be friends
@fthirty3
4 жыл бұрын
Glad you enjoyed the video!
@q.khaiopphitso3719
4 жыл бұрын
*_loved it_* wanna be friends?
@fthirty3
4 жыл бұрын
Glad you enjoyed the video!
@cameronballard7610
Жыл бұрын
bruh i’ve been trying to get my charge pipe out all day idk what to do
@fthirty3
Жыл бұрын
Are you trying to bring it out from the top? How much of it have you gotten it out so far?
@projectsuperman
3 жыл бұрын
I cant wait to do mine!!
@64drmario1
4 жыл бұрын
Did you remove your wheel spacers?
@fthirty3
4 жыл бұрын
Hey Lux_f36, Thanks for watching and for the question! Spacers are still on and I really like how they help with the overall wheel fitment.
@syoung3602
2 жыл бұрын
I have a 435 convertible like yours was it absolutely necessary to take the bumper off to install the intercooler? I saw many regular 435 installs and they didn't pull the bumper off.
@fthirty3
2 жыл бұрын
It makes things much easier since you have to pull out a piece of ducting. I took the bumper off specifically though so that I could paint the vbrace. As long as you can pull out that duct work, than you should be good 👍
@syoung3602
2 жыл бұрын
@@fthirty3 What was the best upgrade for power other than stage 1. performance CATTED down pipe stage 2 flash?
@fthirty3
2 жыл бұрын
High flow cat for sure would help. That combined with the intercooler and charge pipe would get you to stage 2
Пікірлер: 61