CT বা কারেন্ট ট্রান্সফরমার মূলত উচ্চ কারেন্ট পরিমাপ করার জন্য ব্যবহার করা হয়। আমরা জানি হাই পাওয়ার লাইনে কারেন্ট অনেক বেশি থাকে। এক্ষেত্রে সাধারণ এমিটার বা মাল্টিমিটার এই কারেন্ট পরিমাপ করতে পারবে না। একারনে উচ্চ মানের কারেন্টকে নিম্ন রেটিংয়ের মিটার দিয়ে পরিমাপ করার কাজে কারেন্ট ট্রান্সফর্মার ব্যবহার করা হয়।
CT- ৩ ধরনের নিচে আলোচনা করা হলোঃ
1. Wound Type:
The transformers primary winding is physically connected in series with the conductor that carries the measured current flowing in the circuit. The magnitude of the secondary current is dependent on the turns ratio of the transformer.
2. Toroidal Type:
These do not contain a primary winding. Instead, the line that carries the current flowing in the network is threaded through a window or hole in the toroidal transformer. Some current transformers have a “split core” which allows it to be opened, installed, and closed, without disconnecting the circuit to which they are attached.
3. Bar Type:
This type of current transformer uses the actual cable or bus-bar of the main circuit as the primary winding, which is equivalent to a single turn. They are fully insulated from the high operating voltage of the system and are usually bolted to the current carrying device.
Please subscribe and share my channel @banglatech023
#electricalwork #stardelta #housewiring #substation #electrical #electricalengineering #currenttransformer
Негізгі бет Ғылым және технология CT- Current Transformer Type and Working principal ।। CT কি এবং কত প্রকার?
Пікірлер