Still no proper solution is given. The solution is that there is another screw or bolt on the opposite side of this gear shift drum. You need to tight both sides of the shift drum against each other simultaneously. If you tight one side at a time the shift fork will jam to that side. Also the shift lever that is below that detent arm and circular plate has differnet jaw for three speed and 4 speed. Also the adjustments have to be done in neutral
@burrobuddy
7 жыл бұрын
hmm. great idea. I'll have to take a look.
@eddybobea6709
5 жыл бұрын
I tried turning the shifter to either top or bottom gear before doing this so it did lay in between and then tighten both just like he said. I dont know if my comment is clear enough but Im assuming someone who has seen it will have the idea... thanks for the vid and comment, very helpful. Thats another thing, spinning the gears while shifting them... like the person blow states.
@johnwhite192
3 жыл бұрын
Is that really the trick i have same issue currently im installing new clutch and drive gear i bought the kit but honestly don't think it is clutch i took clutch completely apart just lot grime but nothing that would make gears hard to change just like he is explaining my shift star looks new almost i expected lot more wear. Also have question which way is the shift star position in neutral? Thank you wondering if it's not placed correctly or cam lose. But your comment about those two bolts and shift drum made light come on that is totally awesome advice if its correct advice i will update my findings probably couple of weeks after parts arrive. Ty in advance
@johnwhite192
3 жыл бұрын
Also i believe he has correct shift star because mine is definitely 4 speed and it has same star. His looks little odd in video because some of star is hiding behind shift linkage
@johnwhite192
3 жыл бұрын
Yeah that doesn't work on ct70h maybe 3 speed or maybe im missing something
@johnwhite192
3 жыл бұрын
Im having same issue i just bought shift shaft i know that looks bent and im replacing whole transmission im done fooling around with this 30+ year old transmission each part has wear so think about it each part has wear so when assembled imagine how much looseness and play is in there mine runs great and i can ride it but its hard to find neutral but i also hear a gearing sound when its running sounds like maybe shift forks are bent hitting something the clutch on mine is brand new but seems like i can't find sweet spot with adjustments sometimes I can but it doesn't last long then needs adjusting again i think the transmission is so out wack that its screw up everything god only knows but im tearing it apart once i have EVERYTHING i don't want to take it apart then have wait for parts and forget where I left off lol
@burrobuddy
7 жыл бұрын
I got it to work. The solution is not ideal. It does shift better when moving. I found the more I ride the more it worked. But I have to move the shifter up and down a bit to move from 1st to 2nd gear while moving. Only thing I could think of was the return spring was weak. I replaced it with a used one. Still had the same issue.
@johnwhite192
3 жыл бұрын
It could be bent shift shaft try taking it out if it doesn't come out easily it maybe the culprit but im not expert
@brapptv44
Жыл бұрын
i have a simiar issue but i have never opended the case. mine is hard to shift into second and it also like to slip out of gear as well.
@danielparret3623
7 жыл бұрын
Mine dosent go into 3rd, when I shift it just acts like it's in nutrural, do you know what could be wrong with it?
@DillonGaming036
6 жыл бұрын
Daniel Parret i have the same problem i have a 4 speed 1985 70 and mine has trouble going into second and third they act like there in neutral and i think the forks are bad
@silverbeans3779
6 жыл бұрын
+DillonGaming036 Your shift drum is faulty....
@Shortbread7
6 жыл бұрын
Spin the gears while changing gears
@polskatoja
7 жыл бұрын
fucking hell...My ct70H Im rebuilding SAME THING!!!! Got a after market drum and all and shit I think Im doing something wrong
@plusblood5101
Жыл бұрын
Aftermarket shit from chinA Measure the drum vs oem
@fuzzyvision1219
5 жыл бұрын
Hey man cool vid, i have a different question tho. Do you have any idea what that red shaft sticking out of the bikes body above the rear brake spring is? Looks like its slotted for adjustment. I have a 74 ct70h and always wondered what it was
@robertjezek2867
3 жыл бұрын
That is for the rear hand brake cable. I believe. Take care !
@fuzzyvision1219
3 жыл бұрын
Not the holder for the cable, I'm looking right above it, there's a round shaft with a slot in it.
@kingshiloh868
5 жыл бұрын
You help my arc run
@koolkidsRoCk1
10 жыл бұрын
I have the same problem
@1982pantro
7 жыл бұрын
um having the same problem,did yoi figure it out??
@jdparsons1
11 жыл бұрын
Did you ever figure this out?
@burrobuddy
7 жыл бұрын
I posted the solution above. Still not ideal but I can ride it just fine. It's probably a crappy shift aftermarket drum
Пікірлер: 28