If you'd like to support me in this competition! Join this Discord and ask for the Light Switch fan role!
/ discord
Here's the link to the camp! www.deviantart...
MUSIC: Vexento - Home
YO! CTC time again!!!! This time I had to make a go kart and so i decided to make a heroes vs villains based idea.
i made a yin-yang themed chinese dragon kart, the kart features a tail, legs and two heads that are attached at the front sides of the kart. the white side of the kart is fluffy and soft and the black side of the kart is sharp and rocky. also, the white head shoots water and the black side shoots fire.
if you look at the front of the kart directly, the heads are curved around to sort of face outward, this was to keep the heads out of the way of the driver. you will also be able to see the yin yang symbol, with the dots on the symbol functioning as the primary headlights. there are secondary lights in the eyes of the dragon, which you can sort of use as a torch the light they cast is either blue or red, depending on which head is shining its lights. the lights also have the team logo on them, so you can sort of aim the lights at a wall and the team logo will appear!!!
the kart is also covered in scales, carved out of rock and glued over the entirety of the kart, this gives it the appearance of an actual dragon, as well as serving as a protective layer covering the kart. There are also some gem stones that have been glued into the kart just to help out with making it more colourful and pleasant to look out.
lemme explain what it's all made out of and how it works.
all of the weird appendages and stuff are made and carved out of wood and bolted into the kart to keep them sturdy. metallic framing was also used inside of the appendages as a way of reinforcing the design and keeping things tough. the spines all across the dragon were made out of wood and have been carved into fins!!! everything was spraypainted to be the correct colours.
the chins and tail end of the dragon were made using the feathers from a feather duster, and spray painted to be the correct colours.
the eyes on the dragon were made out of small round light bulbs, which have been spray painted the correct colour, the circuitry is all inside of the head of the dragon and the lights can be activated from inside of the kart.
spikes chiselled out of rock have been bolted all along the dark side of the kart and spray painted over to make them look seamless. cotton was used all over the white side of the dragon and glued on to give it an almost wooly coat.
the jaws on the dragons are made using circular plates that have a hinge, it connects the upper head and the lower jaw together, and with the use of a pedal inside of the kart, can be opened and closed at will, and with the push of another pedal will shoot water or fire.
inside the throat of the white dragon is a nozzle, attached to a modified water gun, when the pedal is pushed it squeezes the trigger of the water gun and this allows it to squirt a small amount of water.
inside the throat of the black dragon is a separate nozzle which is attached to a small mechanism. it is a aerosol canister which is being held next to a lit match, when the pedal is pushed, it presses down on the aerosol canister and this causes fire to be shot into a small piece of metallic tubing and it goes into the nozzle and allows the dragon to shoot a small amount of fire.
the kart has a horn built into it, which creates the sound of a dragon roaring when honked. the seat in the kart is painted red and has a small symbol painted onto it to help it complement the design slightly more, and red rings have been spraypainted around the wheels for the same reason.
Негізгі бет CTC 7 - Challenge 3 - "Yin-Yang Dragon Mobile"
No video
Пікірлер: 119