Could be first. 21:30 Gmt will be watching at leisure. 🇮🇪🇪🇺
@theamerican7080
Күн бұрын
Nice work! I see you still have that Winco!
@Kylebythecreek
Күн бұрын
Yep….still have it. Takes up so much room too
@TimGren-jg4wt
Күн бұрын
You should get rid of it
@Kylebythecreek
Күн бұрын
@@TimGren-jg4wt burn it
@Farmalleric
Күн бұрын
Nice job i keep forgetting to make a video of that statesman I bought
@AnnoyingResdiue6969
Күн бұрын
You should do something about the compression
@Kylebythecreek
Күн бұрын
Always do more about compression, got it!
@DefinitelyNotTomgreen
Күн бұрын
You should do more videos on tractos
@Kylebythecreek
Күн бұрын
@@DefinitelyNotTomgreen done!
@theholyplunger
Күн бұрын
Blown transmission? I barely know her!!
@AnnoyingResdiue6969
Күн бұрын
This guy gets it
@TimGren-jg4wt
Күн бұрын
Not only does he get it, but he definitely doesn't strike out with the ladies
@FakeEmail-gt7ru
Күн бұрын
He does strike out with the guys. Loser
@theholyplunger
Күн бұрын
Leave me alone. You don't even know
@robertmailhos8159
Күн бұрын
Not a bad haul for $30 for each of those mowers Kyle by the creek
@richardsteggall1050
Күн бұрын
just a thought the fluid was probably drained out of that transmission before it was shipped
@philliphall5198
Күн бұрын
It’s a requirement to ship now and some times they check them 😢😢😢 Can’t blame them, who wants oil on the floor 😢
@Kylebythecreek
Күн бұрын
Thanks! I’ll check
@michaelhinkle6648
Күн бұрын
Kyle you need to keep a eye out for a cheap air hammer. When those rear tires are stuck on the axle like those were, you can put one of the blunt bits on the air hammer and put it in the center on the axle and use it and the wheels and tires will come right off. It would also bring the drive pulley right off as well.
@Kylebythecreek
Күн бұрын
I need a bigger air compressor too. My air compressor is tiny!
@tattookid1313
Күн бұрын
that a nice shop
@toroon
Күн бұрын
loved the video. Felt your frustration. Never to long to watch good video
@Kylebythecreek
Күн бұрын
Glad to hear that!
@markfolino6976
Күн бұрын
Enjoyed your sons' commentary great video Kyle
@Kylebythecreek
Күн бұрын
I was waiting for someone to comment about that! He’s great!
@michaelkoon8371
Күн бұрын
Looks and sounds great Kyle great job
@Kylebythecreek
Күн бұрын
Thanks!
@philliphall5198
Күн бұрын
Should bring 600 at least in our area in Texas 😊
@TimGren-jg4wt
Күн бұрын
Male a video about airplanes
@Kylebythecreek
Күн бұрын
@@TimGren-jg4wt just in general?
@thomasfrost6993
14 сағат бұрын
How many kids toys has you lawn tractors found over the years? My son's all grown up now but I still remember the tell tale sounds of something getting it once in a while. You have a lot of patience, I do what you do but with chainsaws mostly.
@Kylebythecreek
6 сағат бұрын
I’ve destroyed so many toys! Haha
@fyfedrum
23 сағат бұрын
Nice job, Kyle...way to stay with it when it would have been easier to quit when things weren't looking great. You remind me a lot of a family friend that lives in southern CT, and just like him, your work ethic is SOLID! Don't listen to anyone that tells you differently. Your channel numbers are growing, so you are obviously on the right path...keep it up!
@Kylebythecreek
22 сағат бұрын
I appreciate that! Thanks so much.
@LIMowersAndMore
Күн бұрын
Nice! I can’t stand those MTD FNR transaxles I literally had piles of them in my yard! Works out good when you know what you’re doing keep it up!
@Kylebythecreek
Күн бұрын
Can’t say I knew what I was doing on that one. But it did work out!
@LIMowersAndMore
Күн бұрын
@@Kylebythecreek looked good on my part!
@philliphall5198
Күн бұрын
There MTD junk trans😢😢😢
@Kylebythecreek
22 сағат бұрын
@@philliphall5198 so are most machines we work on. What are you going to do?!
@malerics3210
Күн бұрын
Hi Kyle Love your videos. I do ride ons in Australia for a hobby also. My bench is messy when I am working (and after also) and I am retired. Those keyboard experts love to give you their wisdom and half probably are just to bone lazy to do anything other than criticise. I say ignore them or they will get you down and instead just keep doing what you are doing. Don't even give the acknowledgement to them and just do what you do.... Mal
@Kylebythecreek
Күн бұрын
Thanks Mal. I really appreciate that!
@andybecker2693
Күн бұрын
That Touch N Mow has a strange starter system that winds up the starter when you shut the mower off. You hit the lever it cranks the starter over the next time you start it. The problem is that you get one crank and if it doesn’t start your pulling the recoil anyway. They are pretty rare and they didn’t make them very long. Usually they don’t work by now. That’s a good engine on that Cubby. I was hoping that it wasn’t a Kohler Courage,lol!
@Kylebythecreek
Күн бұрын
I’ve heard of those types of starters, but I don’t think I’ve ever had one! And yes, I’m glad it was a Briggs and not a Kohler courage on this 1170
@philliphall5198
Күн бұрын
I quit sales last month and keeping everything until next year, it’s going to bring more or at least a fair price 😊, just be fixing them all winter and repairing chainsaws 😊
@Kylebythecreek
Күн бұрын
Not a bad plan. Where abouts do you live?
@toddosterhout9866
Күн бұрын
Great job Kyle. Real ingenuity on the transmission! Hope you get a good return on it. One of those self propelled mowers should get your $150 back
@Kylebythecreek
Күн бұрын
Thanks!
@nighthawk7504
19 сағат бұрын
Thanks a lot for your video love it, I am a small engine mechanic also and that was a good job.
@Kylebythecreek
17 сағат бұрын
Thanks! I appreciate that!
@jasonstarnes3838
Күн бұрын
This takes "not working on the space shuttle" to a whole new level. Great work!
@Kylebythecreek
Күн бұрын
Thank you!
@donaldboley771
Күн бұрын
Thats a lot of work to save a mower.
@Kylebythecreek
Күн бұрын
Yes sir!
@donaldboley771
Күн бұрын
@@Kylebythecreek I love your videos. Keep up the good work
@Kylebythecreek
Күн бұрын
@@donaldboley771 thank you!
@paulmonk7820
Күн бұрын
Is it not possible to fix the hole tn the transmission? 😮
@Kylebythecreek
Күн бұрын
It might be for me!
@philliphall5198
Күн бұрын
I think the spay paint was worth it but dam it’s high 😢
@Kylebythecreek
Күн бұрын
Yea. Very expensive
@user-x2z6r
19 сағат бұрын
Really like the long format Kyle.👍
@Kylebythecreek
16 сағат бұрын
Thanks!
@dylanpowers3629
Күн бұрын
Awesome video keep up the videos can't ever get to much of your content always a learning curve but we all get better with your videos thank you Kyle
@Kylebythecreek
Күн бұрын
Thank you. Yes, definitely still learning and that’s the fun of it
@dylanpowers3629
Күн бұрын
@@Kylebythecreek definitely is the fun part your videos is what got me interested in doing this type of work my self you have an awesome rest of your evening Kyle and can't wait to see you're next video drop I'll be watching always
@Kylebythecreek
Күн бұрын
@@dylanpowers3629 that’s so great to hear. Honestly, that’s why I make these videos- to hopefully inspire people to get into this!
@kennynorris8830
Күн бұрын
great work
@Kylebythecreek
Күн бұрын
Thanks!
@mikemoab
Күн бұрын
Nice job
@Kylebythecreek
Күн бұрын
Thank you!
@philliphall5198
Күн бұрын
I would call a junk yard and buy a used one and sale it 😊
@Rein_Ciarfella
Күн бұрын
I think sometimes you get way ahead of yourself, skipping over the first steps, which in this case was the transmission. I wouldn’t assume it’s a lost cause, even with holes in the case, until I’d investigated further. Who knows - it might have been able to be salvaged and saved you some money! See my next comment.
@Kylebythecreek
Күн бұрын
I went with a reliable transmission instead of the broken one. Figured that was a good choice.
@Rein_Ciarfella
Күн бұрын
This is one of the reasons (I’ve learned the hard way) it’s a good idea to give repaired equipment a really thorough shakedown. Way better, in this case, than having a pissed off customer comeback due to excessive smoking during their very first use back home!
@Kylebythecreek
Күн бұрын
Exactly what I’m doing. I didn’t sell to someone. I discovered the blown head gasket before selling it
@Rein_Ciarfella
Күн бұрын
I always want to know why things fail so I can add to my body of knowledge, so for me failure analysis is a huge plus. For your next video, maybe pull the original trans apart to see exactly what’s happened.
@Kylebythecreek
Күн бұрын
Whatever it was, it was catastrophic enough to blow through the case
@philliphall5198
Күн бұрын
Well it’s just other 20 bucks and praying it’s done and you do to 😊
@Kylebythecreek
Күн бұрын
Referring to?
@philliphall5198
Күн бұрын
I miss part of it , did you change out the big pulley ???😮
@Kylebythecreek
Күн бұрын
No. It wouldn’t swap over
@philliphall5198
Күн бұрын
What does a used bumber sale for off the craftsman???
Пікірлер: 84