Man this thing is selling for $3299+ now with a Kawasaki engine. I should’ve bought it two weeks ago at $2999 but I’ve held on for so long trying to be a zero turn because they’re so expensive. Have about an acre of land and I’m tired of spending hours cutting with a push mower so I guess I’ll have to make the sacrifice.
@ultravi7id
3 жыл бұрын
grass
@MCWalsh-zv1vb
3 жыл бұрын
grass
@IdeaStudioBKK
3 жыл бұрын
Zero-turn is the way to go... plus they make you feel like you are flying a pod racer from Star Wars. LoL. I already ran the mulching kit as well, why empty bags, let mother nature do her thang.
@poeonthego
3 жыл бұрын
Agree 100% mulching is the way to go. Yeah it can certainly feel like a pod-racer, till you hit rough ground lol.
@IdeaStudioBKK
3 жыл бұрын
@@poeonthego yeah, suspension isn’t fantastic lol. I had about 3 acrs of land when i lived in RI. I would set the throttle all the way and let her rip. Full pod racer mode 555
@JohnCunningham-sy5ug
Жыл бұрын
Unless you have any hills.got one new 2022 50in like it.
@naemonyoumans4975
5 ай бұрын
I have a 50" zt1 ultimate, the tip of my blades keep breaking off. I have the low lift blades
@ZeekyPoe
3 жыл бұрын
grass
@dahelmer
27 күн бұрын
I just bought that same mower with the Kawasaki engine. The lowest price I could find was $3299 at The Home Depot. My Simplicity zero-turn which is now 20 years old just gave up it ghost. It was an amazing mower all that time. It puts a tear to my eye to have to put her down. Like you , I did a ton of research while looking for a new ZT mower, and came to the same conclusion with the Cub Cadet. This is a great video, very detailed. Thanks!
@hpoe9551
3 жыл бұрын
grass
@rogersmart3537
5 ай бұрын
First of all, Thank you for your service! Much appreciated..... It's been a year now, You have at least a 1 year warranty on the Cub. Did the shop you took it to figure out what the issue was? Do you use it now and how is it doing? I'm surprised that Kawasaki made a bad motor! lol. It's rare and you were just lucky! Thanks for your video tho, I can tell you were just frustrated.
@Olderwiser77
Жыл бұрын
Good video! Wow you only pay $2,499?? Their priced now @ $3,499- Home Depo 9/23 (fjb)
@poeonthego
Жыл бұрын
Thank you, they are even higher around here last time I looked.
@artisboyd807
2 жыл бұрын
Just got a zt1 .Great mower.No vibration awesome cut .Smooth ride.Love it .My cutting time is cut in half.Got it from home depot.
@poeonthego
2 жыл бұрын
Awesome! I agree, is a great machine. Almost a shame that it cuts the job time down so much lol
@donh304
24 күн бұрын
Hey what up Poe!!
@wesdaniells1688
2 жыл бұрын
Thanks ever so much for your detailed intelligent review. Loving your efforts from Cambooya, Australia.
@poeonthego
2 жыл бұрын
Thank you and welcome
@checkyoursix5623
2 жыл бұрын
Just picked up a 2022 ZT1 50" from Home Depot. I liked it because of the Kawasaki engine & my experiences with them. Disappointed about the following: (1) No hour meter - CC dropped that feature about the 2021 model year, (2) the hydrostatic transmissions are the "residential" grade, and aren't designed to be owner-serviceable like my John Deere garden tractors (GT235, GT245), (3) no fuel gauge - you have to peer into the filler cap. Even my old JD L130 had a window you could look through. Price was right, listed at HD for $3,899 and my military discount helped out. Then I get an email from Home Depot telling me my "military discount" has maxed out at $400 for the year, and I have to wait until next January before it's available again for me. Dumb move, as far as I'm concerned. Their biggest competitor (favorite color is blue) gets ALL of my business for a while.
@poeonthego
2 жыл бұрын
Hey there. Yes I was disappointed with the lack of an hour meter as well. I installed one that I purchased aftermarket. The engine have been easy to maintain. I agree a fuel gauge would be nice. I flip the seat up to check the tank before use lol. I hope you get a long life of service from yours. Totally agree that it sucks Home Depot put a limit on Military discounts. I actually find that to be insulting to Vets like you and me. Nice thing is that you have the freedom to NOT give them anymore of your money. Thanks for watching the video and welcome to the channel.
@leechburglights
3 ай бұрын
Yeah, I just learned about the limit of $4k per year at HD. Be careful at Lowes because not everything will be discounted for military veterans. Found that out when doing a railing project around the pools deck. $750 purchase and no discount. I'm looking at a very lightly used one on MarketPlace right now.
@frostcc8536
3 жыл бұрын
Grass
@MichaelKlein-c3p
Жыл бұрын
Getting mine delivered tomorrow from a highly reputable local shop all set up with installed hour meter and mulching kit, fingers crossed. Super excited though…thanks for the great info!!
@Clint0922
5 ай бұрын
What’s better the kohler or Kawasaki engine?
@poeonthego
5 ай бұрын
I am a Koehler fan personally
@danssv8
2 жыл бұрын
Vibration could be un balancing blades. Sure woman won't mind them. They look nice too
@bassiclogic
Ай бұрын
Who the heck mows in the dark? Lights? Ruinously!
@debrasmith9947
5 ай бұрын
Thank you so much for your video! I am looking to get a Cubbie Zero Turn as I have already purchased a regular Cubbie Lawn Tractor style last year. I decided a Zero Turn will be better suited for my 1-1/2 acre property. This is the exact mower I have been looking at and your review convinced me this is the one I should get. Thanks again!
@kennethperian4370
Жыл бұрын
Great job showing and telling, I think I’ll get one of those cub cadets. So thanks again for showing telling have a good day see ya next time see ya bye.
@poeonthego
6 ай бұрын
Thank you. 2 years going strong with it and still very impressed. Unfortunately the prices have gone through the roof on all of the yard equipment.
@danssv8
2 жыл бұрын
You should have gone for a fabricated deck. Oh Deere.
@WellRoundedMBS
3 жыл бұрын
first love the color black & yellow //i still have my push self powered give a good workout i have a hafe acre// good video better then mine
@poeonthego
3 жыл бұрын
That was the first thing that caught my eye. The Cub Cadet stood out against the other makes. It is a beefy strong machine. Very happy with it. btw still have my old push mower (20yrs old) and it is still running like a champ.
@herman5eight
Жыл бұрын
Do yourself a favor and at least get the ZT-3 or above if you want lasting quality.
@wesjeffries9416
3 жыл бұрын
Surprised yours didn’t come with an hourmeter. My ZT1 did.
@poeonthego
2 жыл бұрын
Yeah seems that they aren't including them now. I bought an aftermarket one.
@danssv8
2 жыл бұрын
I got a Rover 46 inch with red paint and round tubing. Not a fan of the red paint but it goes like a Ferrari. Love the solid fabrication deck , more durable in the long run and tougher on rock and stumps lol. However I like the square tubing on yours more and the colours but the Rover was cheaper for the same size and had a Kawasaki motor that is a good motor.
@scotte1153
Жыл бұрын
The Kawasaki is a good motor, but it guzzles gas compared to intek or kohler. Which isn’t that big of a deal if it’s just for your personal yard… but anyone who does side mow jobs with it will appreciate the gas efficiency.
@grandfury5609
6 ай бұрын
So i purchased one yesterday! Zt1 42 w the Kawasaki. First time zero turn owner, so i was pretty blown away by how easy it is to navigate around trees, fences, etc 😂 I previously owned a Husqvarna 46 riding mower and it was a smooth ride. This zero turn beat me down, my back is shot after doing the back yard, the front yard has more of a smoother surface so it didn't bother me but i am getting a spinal fusion in two weeks and idk post surgery if the rods and pins can handle the vibration and ground and pound i took today. I do understand the front wheels are like blocks so its not going to be the best ride on any zero turn i would assume. The vibration wasn't that bad but I might be going back to a riding mower for my lower backs sake.
@poeonthego
6 ай бұрын
I also was amazed by the agility of the zero turn compared to my 1990's craftsman. Yes also agree about the lack of suspension. 2 things I did to help with that are 1. I lowered the tire pressure. This helped a lot. 2. I took the plastic seat bumpers (they call em springs but I don't agree) and replaced them with motorcycle seat springs. This greatly improved the ride. Good luck with your surgery and hopefully you can improve the ride on your new Zero Turn.
@grandfury5609
6 ай бұрын
@@poeonthego Yes! That plastic stuff under the seat does not absorb anything, I will definitely be replacing w springs and I will also tone down the psi level on the front tires. Thanks for the valuable info. As I heal up my wife will be using it, she's never used a lawnmower in her life but really enjoyed learning the zero turn today. 😂
@cw3401
4 ай бұрын
Do you have a video of how to switch to motorcycle springs?@poeonthego Good luck with your back surgery! I have a bad back as well
@bigsonslawncare
3 жыл бұрын
Same mower 2019 version 85hours! Doing good so far for me💪🏽I think they stopped the hour meter on the 2020 onward. I have one on mine.
@poeonthego
3 жыл бұрын
Awesome, glad to hear it is still doing good for you. Welcome to the channel.
@rickwalters3716
3 жыл бұрын
Thanx bud, was on the fence about which one I wanted. Those cubs are pretty machines.
@poeonthego
3 жыл бұрын
Thank you, glad it helped. I was very impressed seeing the Cub Cadet side by side with the John Deere. Hope you enjoy the Cub
@gavinelliot3564
9 ай бұрын
Got at zt1/46/choice never a problem/remember their not bulldozers corncobs???
@poeonthego
8 ай бұрын
I love mine. Has been a real welcomed machine. I have to say though, built a snowplow for mine and it works great. Will have a video up soon.
@timkalvey
Жыл бұрын
I'm in about the exact same situation as you. Had a craftsman lawn tractor for 14 years. It's still running....but I think it's time to let it rest. I'm looking at a 54" deck.
@poeonthego
Жыл бұрын
I hear ya. I hated putting the craftsman down, but, it was really getting old and not performing like I needed. Plus trying to find parts... I looked for several machines and due to the p*ndemic there were not a lot of options. I am very happy with the machine I got.
@wendellharvey5110
10 ай бұрын
I have a new ZT1 42” this summer. I really like it. However when I pill the button to activate the blades it die’s really shake for a second till blades get rotating. No big deal but I assume that’s what the complaint is. I installed their mulch kit and now shopping for their hour meter. Yes surprised there wasn’t one. Thanks good video
@poeonthego
10 ай бұрын
Thank you. Yes mine does the shake when I activate the mower. Yeah it takes a sec or 2 to get used to. But, overall love mine and very happy. Hope you find the same
@grandfury5609
7 ай бұрын
Not sure if I can tell but does the 42" deck exceed the back tire, it looks a bit short? I would like to get a close cut along my fence like I've done with my traditional riding mower.
@poeonthego
7 ай бұрын
I will check tomorrow.
@mmnyr7252
3 жыл бұрын
I appreciate your review. I was also unable to give my money to local shops. Weird. This unit is it. Thanks again!
@poeonthego
3 жыл бұрын
I just could not understand it. I have been a small business owner for a long time. If I didn't/don't have an item on hand to sell, or available to order, I do everything I could to get it for the customer. That included sending them to competition. To literally laugh at a potential customer, who wants to spend THIER money at your business??????
@danssv8
2 жыл бұрын
It vibrates like a Harley because it's a 90 degree v twin motor.
@poeonthego
2 жыл бұрын
Yepper. Mine is actually very smooth running. Having ridden Harley's since I was big enough to hold one up, I am very used to that feeling (and love it). It vibrates less than my old Craftsman.
@jec6379
Жыл бұрын
Thanks for the review. Do you use ethanol free fuel?
@paler1der136
3 жыл бұрын
Hour meter is available for the ZT1 part# 925-06170B, There is a blank where the hour meter is suppose to go and the ZT1 comes prewired. Link kzitem.info/news/bejne/qXeqn6KOipmnZpw&ab_channel=KyleandBaileyGodfrey
@poeonthego
3 жыл бұрын
Thank you. Had not looked into it, but, will do so and if I go that route will be sure to do a video on it.
@TheCragg777
2 жыл бұрын
Just bought it this morning. $3500 usd. Lewiston ID. I wont miss the money, it’s quicker by half. The accuracy and control have reduced the line trimming. 🙏 Have a great week..
@poeonthego
2 жыл бұрын
Awesome. Yes I am so happy with mine. And as you said, it cuts the job down so much. Now I just have to wait till the yard dries up so I can mow lol.
@Nozinbonsai
2 жыл бұрын
Remove the plastic seat bumpers and replace with 3 inch motorcycle seat springs.
@poeonthego
Жыл бұрын
Done and made such a difference. Old Harley seat springs on a Cub Cadet.
@COC785
Жыл бұрын
Thanks for the demo. My 42" Cub Ultima is supposed to be delivered tomorrow. I picked it over others mostly for the 15 1/4" deck height adjustments and the removable floor pan for service. If the 42" Toro had the 15 height settings and removable pan I would have gotten it. The LED lights were also a plus the others didn't have.
@poeonthego
Жыл бұрын
Oh I have to say the removeable floor pan is a great thing. Used my UZT1 today. Still strong
@bbrown6057
Жыл бұрын
Bought the 54" model 2 weeks ago. First thing I did when I got it home was mow the neighbors yard lol. I had just mowed mine and wanted to make sure the one I got didn't have the deck vibration issue. Stupid that they don't put hour meters on them. I have one on order for it. Thanks for the review!
@poeonthego
Жыл бұрын
I hear a lot of folks saying they have the rattle. It took 2 years for mine to start and literally amounted to tightening and lubing the casters
@ciphercode2298
2 жыл бұрын
$3100 at my cub dealer. I can get a john deere z365r for $3500 and it's a 48 in deck,selectable mulch control installed,24hp extended life Briggs engine,13" front wheels,20" rears. For what you gave for it you got a heck of a deal, but the z365r gets better reviews( mostly because of the shaky deck issues) cub has had. I think alot of that can be attributed to their mounting system on the front of the deck. It's only got the one hanger whereas most have 2 in front like the rear has. I doubt the frame size would be an issue because even with a 200lb operator the weights only around 700lbs. The front casters would only be supporting like 125lbs each,because most if the weight sits towards the back. I've never heard any complaints about flexing.
@poeonthego
2 жыл бұрын
By all means go with what you think is best. I just put mine up for the year and have had zero issues with it other than the flat, which is nothing to do with the build or quality. Like I stated in the video I was originally looking at the John Deere, but, couldn't find any. I was in need and the Cub Cadet was available. It has turned out to be a great purchase. I hope you find the same in your choice.
@ltrbuhq
2 жыл бұрын
I have 210 hours on my zt1, I mow commercially in a resort town, none of my properties are flat, got a counter weight on the front and go where no riding mower has went before.
@poeonthego
2 жыл бұрын
Awesome, wait til you see what I am working on. It could be a game changer for lawn maintenance folks.
@markhall3434
Жыл бұрын
ZTS2 50 here. Cost too much but Love it! What's with all that 2x2 mess out back? An Engine Roll bar? Rear bumper is too high, If I back up I can hit the hydros. It's a waste of valuable tool storage space. Some people use their ZT for a work platform around their mountainous property like I do. I need a place for a shovel, chain saw and rake etc, and a trailer just wrecks it's Mobility. Also what's with a $600 bagger that you have to get off to dump? It requires an ASIS (Ass Stays In Seat) Dump basket. I got it all figured out.
@poeonthego
Жыл бұрын
I agree prices have gone out of control. I personally attached mounts to mine to hold objects like rakes, shovels, etc. and has worked out for me. I pull a trailer a lot and it hasn't affected my mobility. As for the bagger, never even looked into them. I have yet to find a bagger system that I have been happy with.
@markhall3434
Жыл бұрын
Point is Cub Cadet went artistic, Not functional. That twisted 2x2 makes that area unusable. Function is everything, they could of done better. That's OK, I cut it up and fixed it all.
@jadensamuelson
Жыл бұрын
How’s she holding up now that you’ve had her for awhile?
@poeonthego
Жыл бұрын
Actually looks and operates like day 1. Now full disclosure it is stored inside a shed and gets monthly maintenance in operating season. But still a great unit for the price I paid
@vanbilly8387
4 ай бұрын
Look at the Cub Cadet and John Deere frames side by side. Cub Cadet welds their side frame rails all the way around where they make contact with the front cross frame. John Deere.... bless their hearts. They didn't even try.
@jrome3264
2 жыл бұрын
Great video. Thank you sir. I bought a ZT1 50 over the weekend. I put an hour meter and deck wash nozzle on last night. So far I love mine.
@poeonthego
2 жыл бұрын
Awesome. hope it brings you years of service.
@mattharriss3835
2 жыл бұрын
how do you like it now 2 months later? I'm about to get that same one
@poeonthego
2 жыл бұрын
@@mattharriss3835 at the 2 month mark it has been wonderful. In fact after a year of running it I am still extremely happy with this machine.
@mattharriss3835
2 жыл бұрын
@@poeonthego AWESOME to hear. I am excited to get the machine.... and I guess that makes me officially old now. LOL!
@poeonthego
2 жыл бұрын
@@mattharriss3835 welcome to THAT club lol. Crazy how time fly's
@lordaresthefirst
Ай бұрын
well done thx
@damarpo5467
2 жыл бұрын
Love my ZT1!... 3 years now with NO issues, just beautiful yard after cutting, ENJOY POTG!
@poeonthego
Жыл бұрын
Awesome. I, unfortunately, am having a major issue and waiting for a shop to have an opening so I can get it figured out. Mine won't start. Good battery you can hear a clunk when you turn the key but that's it. Never been in the rain or snow and I keep a sharp eye on the fluids.
@RoadieWingZZ
Жыл бұрын
Incline grade is more an issue when cutting side to side than up and down. The problem being gravity causing front tire side-slip or actual turning while rear wheel srive struggle to maintain a straight line without rear end drift. Yhis can be minimally annoying or downright dangerous.
@travishoover636
2 жыл бұрын
Just an FYI Cub Cadet is owned and built by MTD as are so many of the others. And now MTD sold out to Dewalt/Stanely. I do like the Cub Cadets, I have had my XT1 LT46 for 7 years. Only repairs are the drivers fault. I have flipped in an 8 foot ditch. My wife hit a steel plate with the blades on, replaced spindle. I smacked full speed into a curb, minor weld repair. And I mow my 1.333 acres and part of my neighbors yard every week. I also loan it out to a neighbor who has 2 acres and this thing still mows like a champ. But, as i have gotten older I want the smoother ride of the zero turn and been looking. Like you I like the fact they have lights. I am in south east Texas and it is hot. I like to mow later in the night. My 2 hang ups with the ZT1 are rear tire size and the stamped decks. I also have hear bad reports on the vibrations.
@poeonthego
2 жыл бұрын
Is crazy how these companies change hands overnight (seems like). Wow you put some wear and tear on yours.
@travishoover636
2 жыл бұрын
@@poeonthego yes sir. In my almost 14 years of marriage my wife has killed every mower ride or push. This is only one that has survived. I did not buy it from box store. I got the almost commercial version from local Wowco.
@poeonthego
2 жыл бұрын
@@travishoover636 lol I hear ya there. Except it is cars my wife burns through. She can't understand a brake pedal is not an on / off switch lmao
@EJ-V8Bikes
Жыл бұрын
Thank you for your very thorough and honest review! Your review has helped me feel more confident with my purchase of my new Cub Cadet. Have you tried the snow plow and if so how did it work out?
@poeonthego
Жыл бұрын
Thank you. No haven't tried the plow, how a full sized tractor I use. But would be interested I trying it out
@EJ-V8Bikes
Жыл бұрын
@@poeonthego are you still just as happy with your Cub Cadet as yoo were last year, or have you run into any problems with it?
@poeonthego
Жыл бұрын
@@EJ-V8Bikes I am still in love with it. There are a few things I am not happy with (wheel rattle from the caster wheels) but over all is holding up nicely and working like it should. Plus it looks good
@danssv8
2 жыл бұрын
Make sure not to put more than 10 psi in your tyres.
@poeonthego
2 жыл бұрын
I am almost ocd when it comes to checking fluids, tightening the nuts and bolts. I also make sure to use recreational gas instead of regular auto gas
@Nozinbonsai
Жыл бұрын
🤔 recreational gas,🤪 .
@vadergtcs6893
2 жыл бұрын
I just got the 42” zt1 with the 7000 Kohler. Only has about 2 hrs on it and when it mowed today I noticed with the choke on it was spitting and sputtering with lots of black smoke. But once I dropped it into the throttle position, it runs smooth and clean.
@poeonthego
2 жыл бұрын
Hello, and welcome. Yes the choke is just to get the engine started and possibly warmed up. When you start to hear it making a chug sound then drop it into the throttle position. Glad it is running good for you. I love mine. Welcome to the channel!
@vadergtcs6893
2 жыл бұрын
@@poeonthego thanks man 🙏🏼
@kenzowin4344
4 ай бұрын
I just got mine 2-3 days ago. I start it today and ride on it for a 30 mins. After 30 mins, i turn it off for my dad to ride on it to cut the grass, while im doing something else. Somehow, we cant get it to start again.
@congaronbo
3 жыл бұрын
Just do a k turn. It's quick, gets rid of turfing marks. Nice review.
@poeonthego
3 жыл бұрын
I was so new to using a zero turn lol. I have stopped digging in when turning. Just a matter of slowing down and not jamming the levers lol. Just have to realize it's not a Tank lol!
@congaronbo
3 жыл бұрын
I have the zt3 60. Front suspension, bigger rear tires and wheels, 24 inch high back seat with arm rests. Commercial grade hydros and engine. I think CC hit a real home run on this line of mowers. You can't beat the Bang for the buck. I'm mowing 2 acres with a lot of obstacles and fencing. Tire pressure can help with your ride. 8 psi rear, 15 to 17 front... Not bad.
@caseynewell4922
2 жыл бұрын
Check your tire pressure also I bought the ZT1 54 inch model seen other videos on KZitem about the manufactures over inflating the tire they’re only supposed to hold 10 pounds I think in the back mine were at 35 Once I lowered the pressure I got better traction when turning and didn’t tear in the grass up as much
@poeonthego
2 жыл бұрын
Thank you, yes I keep mine at the recommended pressure. Although am seriously thinking about trying one of the airless brands.
@johnverschoor7513
2 жыл бұрын
i have the 42 inch also . love it , i do 35 homes a week with mine .did some upgrades , put fenders on mine and put springs for my seat . those plastic bumpers were killing my back .
@poeonthego
2 жыл бұрын
Awesome. Great Idea yeah could put motorcycle seat spring on. I love mine has been an really good piece so far.
@Pantelifts10
2 жыл бұрын
35 homes a week? Damn. Other videos I've watched they say it's not recommended for more than an acre and stuff like that. Glad to hear it's working well for you for commercial purposes
@johnverschoor7513
2 жыл бұрын
@@Pantelifts10 yah it was something i thought about to but needed something at the time . But i baby the machine to lol .when my gauge says clean Air filter i put a new one in and keep the oil changed regularly
@rdotson610
3 ай бұрын
Great video and review
@mattharriss3835
2 жыл бұрын
I think the vibration issue was made about the 50" which has 3 blades and maybe that's it and another complaint was about the engine noise being really loud. You still a Fan of the ZT1 42"?
@poeonthego
2 жыл бұрын
I was finding the complaints on the Ultima ZT1. I hadn't looked at the other units. I also noticed that the complaints seem to have lessened in the year since I bought mine. I set mine up next to a Huskavarna 46" rider and my old craftsman. I feel it is actually a bit quieter, BUT, the craftsman is almost 13yrs old. The Huskie is 2 years old. I am still very happy with it. The simple fact it cut my mow time down by half and honestly is a good looking machine.
@mattharriss3835
2 жыл бұрын
@@poeonthego I actually have a Craftsman 46" now and it's 13 years old as well. I have nothing but respect for that tractor since we have had battles in my lawn. I've ran that thing into so many trees, up the kids slide, got clotheslined by the swing chains you name it and it still going. I've welded the deck back together 3 times. I'm rough on these things.
@damarpo5467
Жыл бұрын
You made the right choice!
@0Zachyt0
Жыл бұрын
Thanks for the review
@lawrencelg13
2 жыл бұрын
Just got this mower yesterday. Overall works like it should when mowing and starts right up every time. I’ve found the throttle doesn’t stay on the full choke position it wants to slide back down on its own. Also when driving around I hear squeaking and not too sure where it is coming from…sounds like it is coming from the front. Last thing I’ve noticed is my left control arm doesn’t go all the way forward.. it goes like 90% of the way. It may just be a simple adjustment on the control arm knob. Not sure if anyone else has had these issues. Would be nice to know.
@poeonthego
2 жыл бұрын
Hello, I had the same problem with the left control arm and was a matter of adjusting it, for me. The squeak I have heard from others and most commonly appears to come from one of the caster wheels. I haven't had an issue with the throttle like that, although I pull it out of choke once started, almost immediately.
@lawrencelg13
2 жыл бұрын
@@poeonthego Hey Man I appreciate the quick reply! I just went and messed around with it and the throttle stayed put but I found eventually it eases it’s way down if not pushed all the way up hard enough.. I just realized (user error). Also I think you may be right because of hearing the squeaking up front just really hard to tell. I looked at the caster on my left side and has no lube so I’m gonna try and out some on to see if that solves my issue!!
@poeonthego
2 жыл бұрын
@@lawrencelg13 awesome glad it is working out for you. Please keep us updated. I am working on some interesting features for mine that could be really cool.
@Mike_VH
2 жыл бұрын
actual width of the entire mower?
@poeonthego
2 жыл бұрын
the mower deck it 42" (just measured it) Actually the width, minus grass shoot, of the CC is 42"
@troopermassie
2 жыл бұрын
I purchased one of these. I had it for less than 8 hours before the drives went out. It is currently sitting in my half mowed yard waiting to be replaced by Home Depot.
@poeonthego
2 жыл бұрын
Sorry to hear. Hopefully Home Depot will do the right thing.
@troopermassie
2 жыл бұрын
@@poeonthego they did. I have a new one and it is running fine.
@poeonthego
2 жыл бұрын
Excellent. Glad it worked out. Please be sure to let me know how it does for you. Always like hearing all points positive or negative.
@tbar1047
2 жыл бұрын
Ariens are a better mower
@poeonthego
2 жыл бұрын
Appreciate your thought. Everyone has their own preferences. Am trying to get my hands on one to review.
@norseguy89
2 жыл бұрын
Really helpful I'm between this and bad boy mz rambler 42
@poeonthego
2 жыл бұрын
I had little to no experience with zero turns. I looked into a lot of models. In the end it came down to price, company history, and availability. The bad boy models had very good reviews but I did not have a local dealer and the price was higher. I hear very good things about bad boy just have no real experience with them.
@norseguy89
2 жыл бұрын
@@poeonthego we do have a local dealer I'm reading the mowers you get direct may be better quality than the big box stores
@poeonthego
2 жыл бұрын
@@norseguy89 oh i wanted to go local "mom n pop" but none had the models I wanted in stock and had no idea when any would be coming in. I prefer the smaller shops.
@blakecraft5143
2 жыл бұрын
You got a steal. Msrp is about $2,800 now days. Let’s go Brandon!
@poeonthego
2 жыл бұрын
Oh yeah prices definitely gone up.
@johnrobattojr6760
Жыл бұрын
Well done review! Price point was my reason for buying the ZT1 42", I wish I got mine for what your price was. I bought mine late Aug '22 so I only have about 8 hrs on it. Had it home delivered and went through all the fun of uncrate and assembly. I do notice I've had to double cut more frequent than I desire. I bought the double bagger and so far I've noticed items are closer than they appear, other than that it works great on dry grass. I did slightly damp once and it clogged the chute of course. Bumped it quite a few times. The deck vibration doesn't seem to be an issue for mine. My tires dig into the turf as well. Still trying to figure that one out. I was going to get the plow attachment but the reviews scare me.
@chinov9445
2 жыл бұрын
Dame treat your grass weeds took over the video 🤦🏽♂️🎯😂
@poeonthego
2 жыл бұрын
we have that under control we finally found a company that actually took care of it
@chinov9445
2 жыл бұрын
@@poeonthego 💯🤙🏽
@richadthompson3655
3 жыл бұрын
Where you got it for that price?
@poeonthego
3 жыл бұрын
At Home Depot in Woodhaven, MI
@richadthompson3655
3 жыл бұрын
I'm thinking to one but it's $3000 here in Port charlotte FL
@poeonthego
3 жыл бұрын
@@richadthompson3655 yep just looked it up from the SAME place I got mine and is now $2,999 for one here.
Пікірлер: 150