Hi, good video, I’m having same issue here. Be waiting for the fuel pump change video.
@rawlinmadaris5712
2 жыл бұрын
Did you ever figure out your problem?
@kennylee9295
2 жыл бұрын
Update from the shop. My fuel lines were pinched due to my fuel tank slowly spinning over time. I've never heard of that. But over time the insulators slowly loosened up over time and fuel tank spun fractions of an inch over time and it caused fuel lines to be pinched.
@pokerman9108
Жыл бұрын
so many test this guy didn't do. he is just tossing parts at a problem. It could be injectors, clogged fuel line somewhere, fuel pump actuator, relief valve, Fuel pump head only, cutoff solenoid, their are test steps to figure out which has the issue. you need about $1200 in test tools plus software to diagnose this issue properly.
@billylewis8597
2 жыл бұрын
Where's update video????
@derecksmith4787
2 жыл бұрын
It could have been the inlet fuel metering valve on the back of the fuel pump its two torx screws and about 10 minutes of work. And not the entire fuel pump. 200 dollar problem not 2 thousand.
@ussenterp65
3 ай бұрын
That pump is more like 6k
@panchovillaz8004
2 жыл бұрын
This fuel pump expensive 😳 to have this new engine
@2131400
Жыл бұрын
2013 T800 ISX 500HP Took the truck to truck wash they wash the engine after that no power on hills very slow with 46000 lb. Same issue everything normal just no power climbing any hill. Any suggestions thank you
@rigmedics5728
3 жыл бұрын
Fuel pump replacement coming soon
@Hacunamattata
2 жыл бұрын
Where is ur shop ... I have an x15 building presure in coolant tank So far 3 shops haven't been able to figured out... They say it's not air compressor or head They both pass test .. So no one knows why it's building presure in coolant tank 😓🤷🏻... Any help?
@rawlinmadaris5712
2 жыл бұрын
I have the same issue with the same truck and motor did replacing the fuel pump resolve the issue? Please let me know if that works and if not what did you do to resolve this issue
@chawiwiss442
2 жыл бұрын
those fuel pumps are well known for failure! porcelain plunger rods break. pretty soon truck will just die and wont start. theres an updated kit for that dimond cut rods
@istratemarian6548
2 жыл бұрын
Fuel filters and the relief valve from ramp are doing the same symptoms
@luqmansalaar8469
2 жыл бұрын
hello sir i have cummins isl euro 5 engine and i want to know which place on that engine oil and diesel
@rigmedics5728
2 жыл бұрын
What is your question?
@kennylee9295
2 жыл бұрын
Replaced my fuel pump, and fuel filters and I still have the same problem
@abrahambennett8427
2 жыл бұрын
any updates?
@kennylee9295
2 жыл бұрын
Still in the shop got a 559 cummins code. It ain't good boys lol
@kennylee9295
2 жыл бұрын
Wrote an update
@kennylee9295
2 жыл бұрын
@Not Necessarily The News Update from the shop. My fuel lines were pinched due to my fuel tank slowly spinning over time. I've never heard of that. But over time the insulators slowly loosened up over time and fuel tank spun fractions of an inch over time and it caused fuel lines to be pinched
@BurtonMotorFreight
Жыл бұрын
@Kenny Lee did you have a check engine light on also.
Пікірлер: 22