I mean.... The model A is probably more dangerous than a grinder without a guard. And that's why we are all here.
@RoarS89
2 жыл бұрын
Throughout nearly 20 years of using a angle grinder, I've had 2 cutting discs explode. One of the time it was because I was dumb, and didn't check the disc before use, which was damaged. The other time, the entire batch of discs were rotted because of bad/moist storage. Not cool when it happens, but still, I do not use a guard, just because it's a pain to reach certain areas with the guard on etc. And as you say, it's a risk _I'm_ willing to take. 🤷♂
@StanleyKubick1
2 жыл бұрын
agreed. people shove their discs inch-deep into stock and act surprised when their discs don't last/explode
@yannick6409
2 жыл бұрын
And also cutting discs often got a "best before" date written on them. ☝🏻
@mattpovah5952
2 жыл бұрын
I use mine without a guard also, but only when wearing other protective gear as well, high impact full face shield and heavy gloves. It is more versatile without the guard, no question.
@Scoots1994
2 жыл бұрын
I can't see what I'm cutting AND hold it absolutely steady with the guard on, so I go without the guard. I do wear safety glasses and gloves but other than that I'm just generally careful. People who wish harm on someone for ANY reason are not good people.
@robertbeirne9813
2 жыл бұрын
@@Scoots1994 that’s how I feel. Better to wear the safety gear yourself. A guard on the grinder won’t help if you have to look around it to see what your doing.
@tbruz965
2 жыл бұрын
So I’m currently watching this video. And as a welding teacher. I heard you say you don’t advocate grinding down welds unless for fitment. Yes I agree with this because of aesthetics. But. What isn’t mentioned is that the weld reinforcement adds zero strength to the weld. A weld with a reinforcement of 1” high has the same strength as a weld ground completely flush. It’s when you remove the weld past flush when you start seeing weak point within the weld and could cause stress risers which lead to cracks. But great work man!! Love your projects!!
@pault8591
2 жыл бұрын
Your welding skills have greatly improved Mike.
@bdodson87
2 жыл бұрын
The same guys who gripe about no guards on a grinder are the same guys that lift a car with a jack and crawl under it without using jackstands as a safety. Love the build!
@bennyb.1742
2 жыл бұрын
So stoked on your builds Mike. You're my favorite build channel now. You sounded a bit stressed in the outro, man don't worry about that stuff. Don't sweat the audience pressure, do your thing and we will watch and enjoy! Build it, and they will come. When I used to do social media stuff for my old bike shop, people could be the worst! Haha I once had a guy say I'm a disgrace to my family and should kill myself after I turned my grandpa's race bike into a resto mod, and then won races on it! I'd always say to those guys "I showed you mine, now you show me yours" and they'd usually disappear.
@stanceworks
2 жыл бұрын
Thanks for the support, Ben!
@warrenarmstrong2154
2 жыл бұрын
About accepting the level of danger with the angle grinder. If i remember correctly you said basically the same thing about the model A until you had a near death experience with it and now look at you, taking every precaution to make sure you're as safe a possible while driving it. You do you.
@Sufficient_Distance
Жыл бұрын
The best you tube channel on the planet where half-way is not an option
@HomeBuiltByJeff
2 жыл бұрын
I don't use guards on my grinders either, because of the same reason. The guard is a pain in the ass, although Fitzee does cut his guards down which looks like a better compromise. I did get sick of filling my nose with grinding dust, metal and whatever else so I wear a full face mask with filters which is better protection all round. Nice work as always.
@stanceworks
2 жыл бұрын
That’s smart, honestly. I need to be better about wearing a msdk
@dalvinsingh
2 жыл бұрын
V must respect our tools cos they r helping to put food on the table, beautiful work, God bless you...
@RogueViirus12
2 жыл бұрын
Never such a thing as too complicated of a jig when it comes to getting everything square and true. Your welds look great Mike, much better than anything I can do. No worries about a finished product in an episode. Any fabrication process is a good episode in my book. Stoked for merch news though!
@DeadkingAZ
2 жыл бұрын
Man that pointer came out and brought back some serious memories.... "Jabajang!!"
@FourOff
2 жыл бұрын
I use my Dewalt miter as a chop saw as well, but made a couple modifications that allow me to keep it from being destroyed (since I also swap the blade for wood once in a while). I machined a new throat plate out of aluminum after I melted the plastic one (which kept stock from sitting flat) and a tin plate that protects the plastic tube for sawdust. Since then, it's been great, but I'm looking forward to the day I have room for a proper chop saw (with a proper metal saw blade).
@shawng8396
2 жыл бұрын
I've run without a guard for many years. I have had plenty explode on me. I generally wear a heavy welding jacket, so that's protected me many times. If I have no choice but to have my face in line with the blade I have a full face shield I wear. I also wear safety glasses as I wear glasses to see anyways. Honestly I am often cutting something in a weird spot or angle that the guard becomes a problem. That's part of custom fabrication. So do your thing man
@Armageddon_71
2 жыл бұрын
The grinder part can basicly be summarized as "do what you want as long as its not stupid" which is great PSA XD
@Novice_Mentality
2 жыл бұрын
As far as the guard situation goes, you know the risks, and you are willing to take them. You advocate others to use it and I think that is the most important part. To each their own. People wishing you harm for you choosing to work a certain way is ridiculous. Love the builds, love the vids, keep on keeping on!
@tonigon5767
2 жыл бұрын
Mike says he can't TIG weld, but look at the RESULTS!!!! 👍👍👍
@david_banner055
Жыл бұрын
You're the best fabricator on the Tube bro, 4 real. 💯
@denniscliff2071
2 жыл бұрын
Same here on the no guard on the angle grinder. It would be worthless with the guard on. A long time ago I stuck my thumb into the cutoff blade and needed ER stiches. Luckily I missed the thumbnail. I now have total respect for the guard less tool.
@PuncakeLena
Жыл бұрын
I like your answer on why you choose to run your angle grinder without a guard. Not everyone answers this question while actively saying to run the grinder with a guard at home, and adding to that I respect your higher than usual saftey standards regarding your cutoff wheels. You should be overly cautious with them if there's basically nothing stopping the wheel from launching itself into your face
@cehiiaranaraa6319
2 жыл бұрын
I watched the whole playlist of 87 videos of the k swap ferrari and the model A playlist of 8 videos and have subscribed with within this week can't wait to see what will happen with the ferrari 👏👏🔥
@daleanderson7629
2 жыл бұрын
Great work as usual cobber I love the precision and attention to detail. One thing is bugging me is you cut the fish plates in a way the seems to massively reduce their strength. The continuous part of that plate that passes from one side to the weld to the other looks to be
@kalamabrew5963
2 жыл бұрын
I just sat down and refreshed to see if you had posted, looks like I managed to hit the button the literal minute you posted haha. Cheers.
@heatheverett
Жыл бұрын
I don't know your age, and it really has no relevance... But you seem wise beyond your years, sir. Your remarks on your choice of tool use and decision to take time to step away from projects are the signs of someone who is realistic and self aware of their skills and project assessment. It's your project, therefore it's your job to manage the efficiency and quality. And you certainly have an excellent grasp on what needs to happen for you to complete your project accordingly. All this is to say, I believe you're doing great work and in a manner that works best for you. KEEP IT UP!
@wyatteells9033
2 жыл бұрын
the fact that you have 92k BOGGLES me, this is some of the best content on race car youtube at the moment!
@jgemeinhardt3955
2 жыл бұрын
Mike, just a quick suggestion, if you're making larger parts (or any parts really) like the frame rails out of hot rolled steel, here's a suggestion to get rid of all of the scale. Cut a shallow frame out of wood, line it with a plastic garbage bag and place your piece(s) on the bag. Fill an old coffee can or something similar with muriatic acid then with an old paint brush or steel wool coat the metal parts with the acid for about 15 minutes and presto, no more mill scale. Then take a water hose, spray off all the old scale and acid and your parts are bare metal. Just dry them off and you're ready for paint, welding, etc. A few cautions, first muriatic acid will etch concrete and similar materials so flood the acid when you spray; second, the steel at this point is completely exposed and will flash rust in a few days; third, make sure you wear gloves rated for the acid.
@terribleturtle3489
2 жыл бұрын
Had no clue you know Kyle, but honestly that makes perfect since!
@Bendejo-lm8wo
2 жыл бұрын
I guarantee most of the people complaining about your grinder use has never used one. Complaining is a very popular hobby right now.
@ferkle1980
2 жыл бұрын
Death wheels are, as you say fine if you respect them. I make sure I'm not in the direct firing line of a shattered disk, but 20 or so years and no incidents later its an awareness of my own mortality over a safety issue in the most part. Chassis members are looking great.
@richardpugh3434
2 жыл бұрын
When you get the pointer hand holding a tig torch, I’ll really be impressed 😁 I love this truck and can’t wait to see it back together. It’s just a perfect hot rod.
@theoriginalwallace
2 жыл бұрын
Looking good, Mike! Don't throw your old torch away as you can get the flexi heads separately. We go through them regularly here at work! Cheers. Leigh.
@jamest5149
2 жыл бұрын
Ok, I accept your a pinion on grinder guards… just one point, 95% of the time you can easily use you grinder with a guard, the 5% is due to tight access. guards are very easy to adjust, move or even shorten all of which WILL save you and for the 5% of times the guard comes off easily 🤷
@DDE_ADDICT
2 жыл бұрын
your jig up is more accurate than when the ford left the factory
@mrmoss149
2 жыл бұрын
" You guys are cah- raazy". I could not agree more.
@davidhg117
2 жыл бұрын
4:58 Mike himself said it, flat is justice
@mikea1893
2 жыл бұрын
Yes the bump Steer you have to make the rack hire level with theTyrod ends Add ride height
@SpecRaceM5
2 жыл бұрын
Loving your videos. Great balance of education and entertainment. Keep up the good work. I wish there were more channels like yours.
@uncle_moose6701
2 жыл бұрын
The thing with the grinder is more a personal matter, if you know what you're doing it shouldn't explode. For me i use a grinder with the protector on pretty much all the time, even though when i was young i saw a cutoff wheel explode and fly into my dad's safety glasses and then fly off across his forehead. No real injuries since the glasses took the majority of the hit, that still scared the shit out of me and kept me away from the grinder for 2 years after that. But now i occasionally use a grinder without the protector, sometimes you just gotta do what you gotta do.
@George-zq2sk
2 жыл бұрын
killer work Mike! this truck is going to be the be EVEN more epic than before. and let's face it, this truck was the coolest build on the internet since the internet.
@bullitt_eightyseven
2 жыл бұрын
Seeing mike use the pointing stick for explanation is always a gem
@Goldstandardmachine138
2 жыл бұрын
I have agree with you on the grinder bit! 20 years of classic car customizing and restorations, and many many burnt up grinders. I have never had a wheel explode unless it being misused and haven't been hurt when they do. Although, it'll probably happen to me the next time I turn on one of my grinders....
@michaelnavarro1938
2 жыл бұрын
This answered so many questions for me thank you so much. But I can't help but think you sound like Kermit the frog, who I friggin love hahaha top job mate
@travisschulz6342
2 жыл бұрын
Little pro tip , when you have to use a mitered joint, cut a matching thickness piece of sheet metal and just match the tubing profile minus 1/2 the material thickness, tack it to the one side of your mitered tube then match your second piece up and weld out .. it makes the joint waayyyy stronger .. for example if you have a 2x3 .120 wall tube you’d have a plate that’s 1.875x2.875 .. builds look killer man can’t wait to see them back on the road
@NoClassic
2 жыл бұрын
I have the habit of not running a guard either. Just make sure to wear a full face shield, good gloves, and a bib or other clothing that is thick enough to prevent puncture.
@aaronmayon9164
2 жыл бұрын
Creeping up on 100k. Let's goooooo
@AshGTE
2 жыл бұрын
That is some impressive fabrication. Well done. I'm very happy I found your channel. It helps me learn as a eager novice. I chopped down my grinder guards so they keep my fingers safe, nothing more.
@koltface
2 жыл бұрын
Cross member looks killer! I've measured dozens of oem and aftermarket production units, they are not a square as what you've tried to do! Keep up the solid work.
@futten3230
2 жыл бұрын
personally hate not having a guard on and never really been a restruction for me neither in work or hobby situation
@alansmith7121
2 жыл бұрын
Thank you for soldiering on!!! Love the content
@nicholassammons6360
2 жыл бұрын
People complaining about someone else not using a guard probably never had to use one for any length of time, and should mind their own business. So many people want to nanny everyone else these days. There are times and places when a guard is just in the way. Cool build btw
@Work_G
2 жыл бұрын
Those plates is the money
@jtubach
2 жыл бұрын
You should watch Project Farm, he tests products like oils, grinder wheels and various tools.
@cramiro71
2 жыл бұрын
Good job Mike, And please security first. It is useful to remove the guard sometimes, but that doesn’t mean you have to work always without it. Or if you do so, protect your face/ eyes, anyone can have an accident, just try to minimize risks
@chunkdaddy4733
2 жыл бұрын
Grinders will bite you quickly but damn idk how many times I’d move the guard and stop and move and stop and move. Then just take the damn thing off and get the job done. Always use a full face shield and use it with respect. All good.
@ken8768
2 жыл бұрын
I really enjoy your channel. Be true to yourself. There will always be nay Sayers. It is what they have to do to feel good about themselves. just ask them to see their book of work. I think you will find there is not one. God bless keep having fun. Thank you for sharing.
@billbrisson
2 жыл бұрын
was waiting for you to set the level on there and say "Make the noise" project Binky style :)
@neiljackson5137
2 жыл бұрын
Jealous of how fast your welding is coming along! 👌🏻
@pawpatina
3 ай бұрын
10:45 its not a finger guard its a spray shield to direct the sparks away from your face/balls. I also dont use the handle that screws into the head and both for the same reason. cant get into tight spaces.
@R0yL33
2 жыл бұрын
looks like the field of those plates has provision for more welding. how bout cutting tubing on 3 sides and bending remaining side to save 1 weld instead of 2 separate pieces... stronger too.
@MrRun4cover
2 жыл бұрын
I have an angle grinder that looks EXACTLY like yours. I've had a disc explode and had no problem. The important things to remember are: don't put your face in line with the rotating part and use proper PPE such as safety glasses and face shields.
@juanrafaeltosado1812
2 жыл бұрын
!! GREAT JOB !!! ( SEND MORE) I LOVE TO LEARN " HR" .
@grassegarage
2 жыл бұрын
Love the text under your name each time 😂
@jnreves
2 жыл бұрын
Hey Mike, I am no expert when it comes to power tools (atleast at the extent you use them) but wouldn't it be safer if you used a Face Shield? You would still mantain the usefulness of the tool without the guard but if the disk exploded it wouldn't pierce your face...
@stanceworks
2 жыл бұрын
You’re not wrong
@samfedorka5629
2 жыл бұрын
Yes I was going to recommend this! If an Engineering Control (guard) is not available and Administrative control options (training, etc.) are exhausted, then the safest option is PPE. You can get very clear face shields that will save your head and not block vision or anything. Stay safe out there!
@XiraArien
2 жыл бұрын
@@samfedorka5629 I also uses face shields. It also protects against all that dust and grime getting into your face :). My eyes are the most valuable thing I got. Regarding guard on the angle grinder I use one with and one without. New grinders have quick position of the guards and most of the time I use the guard to protect my hand and redirect the sparks - not for exploding discs
@doomsday751
2 жыл бұрын
@@stanceworks I’m exactly the same way. No guards on any of grinders. Just respect the tool and don’t be dumb
@adrianandrews7424
2 жыл бұрын
Not because you do ,but I also have many hours with an angle grinder guardless the guards limit it’s use severely anyone who says you should bleed out should change their tampon more frequently if they’re scared of a little blood. Love the content.
@MrAppletree318is
2 жыл бұрын
Fair play showing all your welds as your learning, most would only show the very best bits.
@mr.shenanigans597
2 жыл бұрын
That pointer stick gets me every time. When it come to the grinder, if you know what the risks are and have a acceptable level of safety for you then you are good to go. Every ones level of danger they consider safe is different. Being unaware or misinformed about the dangers is well, stupid.
@SavageCatPhoto
2 жыл бұрын
Should check out the metal cut off blades! I also run mine guard less. Figured these would prevent a blow apart, was Leary at first cause they’re salty but the Lenox metal max blades are sick and last forever!
@stanceworks
2 жыл бұрын
I've tried them and hated them, personally. It felt like it couldn't cut anything.
@JimmyJamesMarquees
2 жыл бұрын
No need to explain yourself about the grinders and stuff mate. You’re doing great 💪🏼
@arcadiagreen150
2 жыл бұрын
whenever running grinder with no guard, simply engage safety squints first. safety 3rd.
@eddiea2606
2 жыл бұрын
Loving the way the shop looks with the new storage area
@anthonyhill06
2 жыл бұрын
Been using them without guards for years! One of the best tools I own
@Billyspacerocket
2 жыл бұрын
Nice work welding the bellhousing = Not an easy task / Good stuff!!!
@oldschool1993
2 жыл бұрын
Daily episodes are the thing of the future- there are thousands of people trying to become You tube millionaires and viewers want fast gratification- waiting days or a week for the next episode drives people to those guys who are posting daily. It means the days of the amateur creator are coming to an end and the professionals are taking over.
@roo3973
2 жыл бұрын
I'm not interested in daily content from creators. I don't have the time for that. There'll still be plenty of viewers of high quality content, like Mike is creating.
@oldschool1993
2 жыл бұрын
@@roo3973 Of course that is your personal preference, I am just commenting on the general trend.
@ep3k24
2 жыл бұрын
I’ve never used a guard. They are annoying. I throw it in the trash as soon as I get a new grinder. I’ve never had a disc break. People will always have issue with anything you do. Welcome to the internet haha.
@christianvann4222
2 жыл бұрын
Great work. I don't want you to rush any of your projects! It should always be the best you can do, and if that takes a bit more time, then thats what has to happen. Looking forward to seeing the Ford & Rarri finished though 😁
@hearse-tf8cp
Жыл бұрын
I don't use a guard myself. I've had a few explode & no injuries.
@marchenning5037
2 жыл бұрын
You make me laugh every episode, with the this is the way I do this and if you don't like it well then tough on you
@kennethgamble5498
2 жыл бұрын
Idk if this has been said, but Tony Angelo has a video about bump steer and how to set up rack and pinions.
@Dennis-eh2vx
2 жыл бұрын
I am afraid those fishplates will hold water because the holes aren’t welded shut, it’s no comment. Just wanted to mention it in case you haven’t thought about it. I am a custom build yacht painter and always notice potential areas in new constructions which I see on you tube that will rot eventually. If it’s worth it and people are really motivated and dedicated builders I warn them
@CrankAddict
2 жыл бұрын
It seems those fish plates would be a lot stronger if those vertical cutouts went horizontal instead.
@lesgobrandon9826
2 жыл бұрын
Yep, they're pretty useless with the guard on unless you're cutting flat stuff. You can also get smaller ones for getting into even tighter places, once you remove the guard.. Death wheel for life! lol
@peterhatch1583
2 жыл бұрын
Thank you for the video!!
@benoitdeclercq9722
2 жыл бұрын
Hey Mike, when u said i buy them(discs) in bulk, i had to think about the expiring date on those cutting discs ... in the metal inside edge is the date! people sometimes do sales on 'almost' expired ones :( this is also a common reason for failures (with or without guard ;) )
@stanceworks
2 жыл бұрын
Worry not! My current box is good until 2023
@jdwxly
2 жыл бұрын
Project Binky did an entire episode on steering rack and link location to get proper steering geometry. Might be worth looking that up as an example to help with your project.
@joetheindividual4855
2 жыл бұрын
Forget about having a “finished product” in an episode. I’m here for the process, if I want a finished build in one episode I’ll watch “building a _____ in 15 minutes episode.”
@tonycrispin
2 жыл бұрын
No guard on the grinder ever, like you said, respect the tool and chances are good you won't die.
@frankthieme8724
2 жыл бұрын
Good job, Mike. 👍 🙋♂️🇩🇪
@StanleyKubick1
2 жыл бұрын
excellent progress made and I really like the slotted bracing. I don't understand why you wouldn't save yourself hours and just mig-weld the whole frame, but I suppose knowing it's pretty underneath counts for something.
@capnthepeafarmer
2 жыл бұрын
Awesome work, Mike! You're a much better fabricator than I will probably ever be, and I know I'm my own worst enemy and I'll leave my guards on or wear as much PPE as possible. I've been bitten too many times by being impatient and not doing things the safe way. It may not happen this time or the next 1000 times I use the tool, but eventually it will happen and the only person to blame is yourself. That's my hot take on it.
@ashleyharvey6
2 жыл бұрын
I hope you or anybody is hurt with exploding grinder disc. Also if you are ever worried about your safety, using a full face shield (in addition to safety glasses and hearing protection) will add another layer of safety. Net result is take away one layer and add one, making it just as safe.
@stevemullen8457
2 жыл бұрын
Most of us remove the guard as it's always in the way.
@s3w349
2 жыл бұрын
I subscribed because of your truck love it. Started watching your Ferrari build now I’m hooked. Thanks for the content.
@mcskifter
Жыл бұрын
Use a masonry wheel on mill scale.
@tycorcoran6965
2 жыл бұрын
`Your way, your level of risk. Your responsibility. I am blind, I do think others think I am stupid for doing things but I know the risks and negake them to an acceptable level
@GrindhousePerformance
2 жыл бұрын
That's a hell of a transmission repair dude, jesus. I found a wire wheel on a big pedestal grinder works phenomenally for removing mill scale
@j.d.8593
2 жыл бұрын
A good "Do as i say, not as i do unless you accept the risk" would've been perfect for no guard on the grinder 🤪
@sb-s395
2 жыл бұрын
Still feel like I’m cheating on the Ferrari but the Model A is stunning.
@StraightLineCycles
2 жыл бұрын
The color pattern on the fishmouth plates are so strange looking, just a wierd looking pattern. Looks frigging sweet tho
@danielgrafik
2 жыл бұрын
Good looking welds!
@ttinnovations3310
2 жыл бұрын
Nice ! ( but the plate brace make soo sense, as you cut out so much material its kinda useless lol)
@dougjones4987
2 жыл бұрын
apparently you have cut into your fingers enough with a zip weel to warrant using a guard as I have and boy do they take a while to heel, thats probably why i use guards.
Пікірлер: 217