I purchased the HD Signature LEDs. The Dealership I went to had both the Signature & ProBeam on display so I used a light meter to see which one was the brightest. The Signature was about 400 lumens brighter than the ProBeam. That’s why I decided on them.
@mldiode
Жыл бұрын
I good tip is when removing the bulb (w/cloth to keep hand oil off bulb) is to make note of the orientation of the 1157 bulb pins as you remove them. This way when installing the led lights will make for an easier insert into holder.
@NoodlesNJ1
3 жыл бұрын
A dime works and fits perfect in the tab to remove the Lens covers
@commonmanbagger9165
3 жыл бұрын
Good idea!! Never even thought of that. Thanks for the comment. -Chad
@streetglidesteve7315
3 жыл бұрын
I was recently at my local HD dealer and saw a real time side by side comparison of the new H-D led turn signals and CD pro beam and I gotta say the outer white ring on the H-D’s were blinding me as they were much brighter on the display stand than the CD I currently have the CD pro beam turn signals on my 2020 Streetglide and I’m thinking of upgrading to the new H-D ‘s much brighter
@PolPopCult
3 жыл бұрын
Thank you for showing these lights side by side! Helped me decide to just do the HD lights for my CVO Street Glide.
@commonmanbagger9165
3 жыл бұрын
You are welcome. Thanks for watching. -Chad
@brianmedeiros417
2 жыл бұрын
Nice job. Samantha is great. I always say hi to her and butch when I stop by.
@commonmanbagger9165
2 жыл бұрын
We love Sam!! Thanks for watching! -Chad
@jimmybobberharley
Жыл бұрын
CD makes these for Harley, true story
@johnmatero234
3 жыл бұрын
2021 Road Glide and the Harley fronts went on, but the backs would not snap into the housings. Seems to be a known issue, so went with CD for the rears. The advantage of the Harley is that the halo ring is continuous like a light pipe while the CD is a collection of LEDs to make the circle. Also, the signal lights from the sides can be seen better on the HD.
@commonmanbagger9165
3 жыл бұрын
My rears are still on order. They had the fronts but were back ordered on the rears. Hopefully they fit!! Thanks for watching. -Chad
@GameJit
3 жыл бұрын
Probably just the seal. Gotta remove it it push it in farther
@FranBunnyFFXII
3 жыл бұрын
dang, I wanna see the rear ones.
@commonmanbagger9165
3 жыл бұрын
Check back in a week or two. I ordered them in April from H-D. They didn’t arrive until about a week ago. Back ordered for months. I’ll make a video though. Thanks for watching. -Chad
@FranBunnyFFXII
3 жыл бұрын
@@commonmanbagger9165 Oh cool thanks! Ill check back then.
@Iron_Bagger
3 жыл бұрын
I have popcorn ready for the video on the Factory 47’s so I can watch how you rework the clutch cable before I do mine.
@commonmanbagger9165
3 жыл бұрын
I did them last weekend. Unfortunately we didn't film it. The cable actually wasn't an issue with the 12" bars. I did have to cut the zip tie that ties the cable to the top of the fork down tube. Just needed a little bit more slack. But overall not an issue. -Chad
@Iron_Bagger
3 жыл бұрын
That’s helpful, thanks!
@commonmanbagger9165
3 жыл бұрын
@@Iron_Bagger I had to readjust those bars a bit today. Just the pitch on them. But I took a couple pictures if you want to email me commonmanbagger@gmail.com I’ll send them to you
@motorcycleden
3 жыл бұрын
Thanks for the comparison! It looks like the Harley version has some clear or smoke on the side of the bezel that would allow some light to shine through where the Custom Dynamics don't. Is that accurate?
@commonmanbagger9165
3 жыл бұрын
The Harley lens is clear and the halo is solid as compared to the pro beam.
@ErikR1979
2 жыл бұрын
Hey, great video. Just curious, some of the reviews on Harley's website are confusing. Judging by your video it doesn't look like I need either, but I thought I would ask anyway. 1. Will I need a load equalizer for this to work? 2. Do you need an ECM update for it to work? Thanks
@commonmanbagger9165
2 жыл бұрын
What year is your bike? If it is an older bike you will need a load equalizer.
@ErikR1979
2 жыл бұрын
@@commonmanbagger9165 I have a 2021 Fat Bob... So I should be in the clear. Thanks man. I'm ordering front and rear now.
@commonmanbagger9165
2 жыл бұрын
You are correct no load equalizer needed. Good luck and thanks for watching! -Chad
@MainyMitsu
3 жыл бұрын
Did you have any BCM codes thrown after doing this? I just added the same lights front blinkers and now I'm seeing two codes for left and right blinkers open.
@commonmanbagger9165
3 жыл бұрын
I did throw two codes. I cleared them and they did not come back.
@MainyMitsu
3 жыл бұрын
@@commonmanbagger9165 I keep resetting mine but they come back when I turn the ignition off
@commonmanbagger9165
3 жыл бұрын
Did you replace the fronts and the backs? If you are running LED in the front and incandescent in the back the bike will get confused and could continue throwing the code.
@MainyMitsu
3 жыл бұрын
@@commonmanbagger9165 I did the fronts only! That makes a ton of sense! Gonna pick up the backs tomorrow!
@iujmedw
2 жыл бұрын
I know Custom Dynamics has a lifetime warranty. Not sure about HD.
@commonmanbagger9165
2 жыл бұрын
Unfortunately HD only provides a 1yr Warranty. Custom Dynamics warranty is much better. Thanks for watching. -Chad
@mrchalco
2 жыл бұрын
New sub here. I also have the hd led front and back. I like the HD bc they are all in one and seal pretty good. The rear ones are tougher to install . Great video I’m A new KZitemr would love ur input on my vids. Ride safe bros
@commonmanbagger9165
2 жыл бұрын
Mr Chalco Welcome to the channel!! The rear LED lights really are a tight fit but totally worth it. We are a newish channel as well. Looks like yours is coming along! I find with every video I make I learn something new and there has been a lot of learning as I go. Big thing is to just stick with it. Good luck and thanks for the comment. -Chad.
Пікірлер: 36