I want to buy this from you! Let me know if that’s possible once manufacturers are up and running again. I know of TON of composers that would buy this. There’s a HUGE demand for this exact thing in our world.
@garaiss
3 жыл бұрын
Totally agree with you! I would love to buy too this one!
@joetowers4804
3 жыл бұрын
That's why I'm here as well.
@evanwilliamsss
3 жыл бұрын
exactly why i'm here. there aren't enough small format fader boards with full sized faders
@joaobaptistabrandao
3 жыл бұрын
I plan to make some of that in thd future! I'm currently a student of computer engineering
@NikolausBrocke
3 жыл бұрын
Very good work. I would love to see an (SSL) channel strip that works for all the software strips outside (brainworx, waves, softube, acoustica etc.). Fader, rotary encoder and buttons in one vertical module. Then you can add as much channels as you want. It's so popular. People want to mix hands-on and by ear again. Because it makes more fun.
@Cubik303
5 жыл бұрын
Gorgeous and simple design! Very impressed and thanks for the good ideas, especially the simple 1-button UI.
@NotesAndVolts
5 жыл бұрын
Thanks Cubik!
@officialnoslenj
4 жыл бұрын
believe in Jesus ministries I’m interested as well
@TheGg6422
3 жыл бұрын
Nice project...one build tip from a guy who built custom test fixtures for medical devices(Philips)for over 30 years... use metric PEM studs(like McMaster-Carr #93580A578) that press fit into your panel or case so there is no screw head that shows thru on the top side! PS i just downloaded your code for the Synth project into a Teensy 4.0 and used my Casio USB MIDI as its input. It worked OK but only played the highest one note! Nice channel keep up the great work.
@jamesedinger4956
Жыл бұрын
Stunning build quality...and love the one button scheme...straight forward and elegant, just like the face panel
@NotesAndVolts
Жыл бұрын
Glad you like it!
@iainctduncan
3 жыл бұрын
Oh man, that's beautiful. I wound up here after realizing NONE of the commercial units are nice this way. Minimal, quality, just does the damn job and won't break!!!
@pigpog2307
3 жыл бұрын
This is Awesome! I need this for my composer studio !
@magnusnordbye657
4 жыл бұрын
This looks amazing! Any chance you'll share the code used for this?
@PrinceWesterburg
3 жыл бұрын
I haven't programmed in 30 years and just discovered Arduino as I need, oddly, a fader! This actually looks pretty easy and you probably could cobble something together from other people's code. You just need sub routines for button timing that change global variables via fader output. The rest is just a simple integer output to the LED display and there's boun ot be a library for that.
@sasujuntunen3750
Жыл бұрын
Dude! Do you understand how COOL these boards are? I love them. Why don't you mass produce them? There are many of us who would buy it. How much would one cost?
@clemradio
3 жыл бұрын
Love the whole thing. Would be awesome in digital and analogue radio console, with ON/OFF buttons at the bottom of the faders.
@MarkBowenPiano
4 жыл бұрын
Quite simply and absolutely the best made MIDI controller I've ever come across. Stunning work! Just started getting into Arduino myself and need to build one pretty much like this for expression and dynamics controls. Pretty sure mine won't have a chance of looking as beautiful as yours as I have no knowledge of designing a housing for it but going to do my best. Fantastic work and thank you so much for the brilliant content you've put out on your channel, very much appreciated. Stay safe.
@user-ro2ic4pk9d
3 жыл бұрын
Amazing work! Can you share the code, please? This one button UI looks great.
@sabrilatip7487
3 жыл бұрын
Thanks,I like midi since 80s but as user. hopefully I can make one just like. Video is awesome and well presented
@suntzu6122
Жыл бұрын
That looks amazing
@TheMoeP
2 жыл бұрын
Nice design! I did something very similar to this, with the same brushed steel plate but I added an LCD display and a 4x4 launchpad, I had to use a bigger Teensy because of the amount of outputs I had
@NotesAndVolts
2 жыл бұрын
Very cool!
@massamsdc3444
4 жыл бұрын
Minimalistically Awesome! :) Loved it and gotta make me one with 8 faders (2 hands x 4 fingers) someday! ;)
@gerardhranek5414
3 жыл бұрын
Unless there’s a way to buy this, it’s just a really frustrating tease. I echo all the comments by the composer/orchestrator community.
@loopie007
Жыл бұрын
Really nice. Inspiring..
@NotesAndVolts
Жыл бұрын
Thanks a lot
@manuelserranorodriguez727
Жыл бұрын
Magnifico trabajo!!! Quisiera atreverme a realizar uno, pero necesitaría el esquema con las medidas del panel frontal. Además, del modelo de faders que utilizó. Un saludo desde España!!
@juliev123
4 жыл бұрын
great work Dave!
@imbuildingasynth
4 жыл бұрын
awesome project i am meant o build a very similar box for my studio neighbour, just with motor faders... wanna jump in haha?
@nerolifong1824
4 жыл бұрын
i have learnt so much in watching your videos. thank you very much !
@JohanSamuel
3 жыл бұрын
@Notes and Volts Wow! This looks amazing! 🤩 I would love to buy a DIY-kit if you choose to make that available. Can you please recommend a good set of 100mm faders? Wich one do you use in this project?
@qball8up1968
3 жыл бұрын
A work of art.
@NotesAndVolts
3 жыл бұрын
Thanks Keith!
@lmcriminals
5 жыл бұрын
Do you have a link to the faders you used?
@bobbycurlee3409
3 жыл бұрын
Could I order one of these?
@darrentaylor6967
2 жыл бұрын
Could you add a button For a page change
@djgalawak
Жыл бұрын
ola, nice .. can you make 12 faders with matrix launch pad 12x6 ? without box. best vibes
@kkervinli1180
4 жыл бұрын
hey guys,it‘s simple and useful,can i buy the end product ?thanks
@andrewtmusic
4 жыл бұрын
Looks awesome what's two of those costs or one with 8 faders?
@alexandretravi
4 жыл бұрын
hi !! some with motor fader project?
@janpetersen5341
3 жыл бұрын
Just finishing a similar project I would like to know what would be the advantage of using motorised faders (which I'm considering). Could you enlighten me please?
@vinci3965
4 жыл бұрын
Excellent video !
@nimrod7785
3 жыл бұрын
I would buy this. Looking for large faders for cc for long now. There is a market for that stuff (composers).
@VeGaaS77
2 жыл бұрын
It was great to watch, great job ? Quick question : the fader knobs don't look the same on the client's picture i was wondering if it was a lighting effect in his space or you changed them before shipping ?
@NotesAndVolts
Жыл бұрын
Thank you! The client replaced the faders after delivery.
@domino2205
4 жыл бұрын
another awesome video
@edvinasmomkus785
4 жыл бұрын
Thank you for sharing!
@paulammon9746
Жыл бұрын
Is there any way to get the PCB design that you used to order it from JLCPCB? im Trying to build one my self, but i dont really know how to create a pcb board from the scematic you showed in your updated video. I Love the design and think it would do an awsome job for dynamic and expression controll while scoring.
@weststarr2046
5 жыл бұрын
Just AWESOME ...maan 😎👏🏾👏🏾👏🏾👏🏾!!!
@NotesAndVolts
5 жыл бұрын
Thanks West!
@shmish
4 жыл бұрын
Looks great! What are those two extra chips/boards? It looks like one is needed for controller/interfacing with the LCD? edit: I guess they are multiplexers? I didn't think about that at first because with the Teensy LC and 4 pots, you have enough pins on the Teensy. But maybe if you use common libraries for your devices using a multiplexer, it makes sense to use a mux for all projects?
@NotesAndVolts
4 жыл бұрын
Hi Doug. One chip is a LED driver that makes working with displays way easier, The other chip is a level shifter that interfaces the 3.3v Teensy to the 5v LED chip.
@frenzykitty
5 жыл бұрын
Stunning
@NotesAndVolts
5 жыл бұрын
Thanks Gareth!
@neonvoid
Жыл бұрын
Super cool ;)
@NotesAndVolts
Жыл бұрын
Thanks Neon! Love your synth streams 👍
@lukaskohn2758
2 жыл бұрын
were did you got the faders?
@NotesAndVolts
2 жыл бұрын
Hi Lucas. The fader was specified from the client. They are Alps RSA0N1119A02. I ordered them from Mouser.
@tilleyroadaffairproduction6752
4 жыл бұрын
Hi there what a beauty! How much does it cost to get one? In Canada
@mateobezuh2199
2 жыл бұрын
Hey man, nice project. Great work! :) I was thinking of scrapping my old Akai LPD8 and using its wiring to somehow replace its knobs with 100mm faders in a new enclosure. Do you think that the knobs could be replaced/rewired to a fader. Thank you.
@NotesAndVolts
2 жыл бұрын
I think it should work.
@teentraveller8165
4 жыл бұрын
Can we use this in any software
@hamidzare561
3 жыл бұрын
This is so cool I will be happy if you let me know the model of faders and their Ohm value.Tnx
@manuelreyescanaloficial
23 күн бұрын
Hello I need buy this Ovb but I Dont know with is. Do you send my email the link for buy this pcb? Other components is ok
@nanotrax
3 жыл бұрын
very nice
@NotesAndVolts
3 жыл бұрын
Thanks!
@shmish
4 жыл бұрын
Why do you have 5 pins for the USB connection? Isn't is just vcc, d-, d+, gnd for USB-A? When I connect d- and d+ to header pins in KiCad (eeschema), I get all sorts of warnings about d- and d+ being shared pins.
@ottoinfomusic
4 жыл бұрын
You hove project with motorized fader?
@zachariahabraham3356
3 жыл бұрын
Would be great to see an audrino version of this
@MacyLytle
3 жыл бұрын
This is most likely using teensyduino so is basically Arduino already.
@sashabeep
5 жыл бұрын
PLZ make video with endless rotary encoders for nudging tracks, scratch etc
@NotesAndVolts
5 жыл бұрын
Hi Sasha. That's definitely on my list for the future.
@QMusicUK
Жыл бұрын
Are. you taking orders? How can I get in touch?
@caminglis53
2 жыл бұрын
Is this midi compliant plug and play into anything like pro tools, Logic Pro, etc ? Also could it be Programed so that the name found by the computer could a custom name example ‘midi console’ ? I have a project I’m thinking about where this could be ideal
@rudgns69
6 ай бұрын
Can I buy it? It's Korea.
@bFOURdwZEROlf
4 жыл бұрын
how much would a master fader and 2 arcade buttons, or 2 Linear Key-switches (like o ------I------ o ) be
@Puto73
3 жыл бұрын
Could you build one for a cost of course. I’d really love one.
@ghuinink
4 жыл бұрын
Do you sell more of them, i'm interested
@NotesAndVolts
4 жыл бұрын
Hi Geert. I looking into making a small number of these available but need to work out a lot of logistics. Stay tuned!
@officialnoslenj
4 жыл бұрын
Notes and Volts I’m interested as well.
@JorgeAlmeidadamaged
4 жыл бұрын
@@NotesAndVolts if you ver get some of these available, let me know, I may be interested. Awesome project!
@23Guitardood
3 жыл бұрын
@@NotesAndVolts definitely interested, please let me know!
@lordawesomeTRiBE
3 жыл бұрын
I want to make this dm is where can I download the files
@charlottewilliamcover3568
3 жыл бұрын
Hi. Can you advise how to order this fader box, or only parts, the PCB and the code would be enough for me ? In this case can you link to the display and fader you choose ? Rgds.
@cyrilcalmes4208
2 жыл бұрын
Hello. Fantastic job. What faders did you use ?
@NotesAndVolts
2 жыл бұрын
Alps RSA0N1119A02
@philipp594
3 жыл бұрын
What kind of faders are you using? Yours seem only to have 2 pins connected. Sorry I am totally new to the subject.
@miguel96ANGEL2
5 жыл бұрын
I'd love to see the code for this :D
@NotesAndVolts
5 жыл бұрын
Hi Perez. I'm working on making a configurable version of the code for a future video. Stay tuned!
@SE-144
4 жыл бұрын
Is the code similar to what was used for the teensy synth? Also it would be nice to demo with a simple synth created in PD
@miguel96ANGEL2
4 жыл бұрын
@@NotesAndVolts Thank you so much, I'll wait for it
@guitar1993
3 жыл бұрын
@@NotesAndVolts Is this still happening? I'd love to see the code for this as well
@clemradio
3 жыл бұрын
@@guitar1993 it's frustrating, this guy just made the best fader board ever. As a radio broadcaster, I'd love to make my custom radio digital mixing console, instead of MIDI, but keeping the exact same good design. That would be way cheaper than the current 'industry' standards.
@matthewJ142
3 жыл бұрын
I thought full size was 128mm?
@loopie007
Жыл бұрын
I looked at this very closely and it can't work. I don't see any chip(s) that provides power to the motors (motor controller) or how you received feedback from the slider pots. Unfortunately for me, somehow you confused me as the video shows it working. Hmm... How do you do it??
@NotesAndVolts
Жыл бұрын
These aren't motorized faders. The faders are one way - midi out to the daw. They don't receive feedback.
@Heinz19946
4 жыл бұрын
hey man, i have a question i am doing a project where i have 1 display a buttons(its a sim racing steering wheel) i want to do the conection from arduino to a sort of lumbar connector and then the connector to usb so i can disconnect the steering wheel without disconecting the usb how can i do it? can you plis show me a wiring diagram or something?(i accept recomendatios if what connectors to use) thanks
@studieslessonstheoryetc141
2 жыл бұрын
Do you offer a course in building/programming?
@brianwilson2904
3 жыл бұрын
nice job, just one question will the faders move if you use the faders in the DAW?
@TrueUser2820
2 жыл бұрын
Great! Could you please tell me the part number of the 100mm faders you used for this project? I'm having trouble finding linear potentiometers with that travel distance.
@mickaelmarin1221
2 жыл бұрын
alps or bourns have 100mm linear fader
@LayItProductions202
2 жыл бұрын
Did you release the code for this controller I am trying to make my LCD 16*2 to read values out my DAW I already made the controller using your code it is a 19 pot midi controller with display need display help🤣
@One979
4 жыл бұрын
Would you consider building an 8 fader controller (100mm) for the right price? Two modes, hui for pro tools faders (pitchbend on midi channels 1-8), and ableton mode. How can I get in touch with you?
@BenjaminFrock
3 жыл бұрын
do you use some type of digital processing when editing your voice for your videos?
@znelson32
4 жыл бұрын
Alright stop playing with the faders! lol
@willowwonderbull7100
4 жыл бұрын
i really wish i could do this anyone have a suggestion to a good book to start learning how to build boards
@Fallgrapp
3 жыл бұрын
where i buy?
@raytheonorion
5 жыл бұрын
How much more difficult/ costly would motorised faders have been?
@NotesAndVolts
5 жыл бұрын
HI Raytheon. That would be a whole different project.
@MarkEisenman
4 жыл бұрын
Any chance of buying a unit like that from you? I need a midi controller with a couple (2 or 3) faders. In a housing of some kind... probably it's not worth your time.)
@NotesAndVolts
4 жыл бұрын
Hi Mark. I have been working on the idea of making a kit of this project for people. I have also experimented with 3D printed enclosures instead of wooden ones that really cut down the cost. Unfortunately, the metal fab supplier I used is closed due to Covid-19 and it's really hard to do any manufacturing right now. But I'm still working on it.
@MarkEisenman
4 жыл бұрын
Notes and Volts Thanks for the quick reply. Great work on that unit. Let me know if and when anything changes, and thanks again.
@23Guitardood
3 жыл бұрын
@@NotesAndVolts any updates on this?? Would LOVE to purchase one of these... Or custom order an 8 fader option possibly... Please let me know. Thanks!
@DH-qu8wh
5 жыл бұрын
I love your videos! Do you sell PCBs of any of your projects? I'm specifically looking for a wham jammer PCB Been wanting to build one for a while, but I don't have a great track record with vero/breadboard stuff. Thanks for sharing all your knowledge about making audio gear! OH, BTW, your Amazon links aren't working, both here and on your main site.
@NotesAndVolts
5 жыл бұрын
Hi DH. I have some boards for the WJ project but I haven't got around to testing them. Contact me by email or better yet - on Discord.
@davejohnsonmusic
3 жыл бұрын
Are you selling these?
@machmar
4 жыл бұрын
It will still be better with motorized encoder
@enterthetainment1832
Жыл бұрын
Holly shit I just got pregnant LOL this is SOOOO beautiful. TAKE MY MONEY
@NotesAndVolts
Жыл бұрын
LoL! If it's a boy, Dave is a great name. Just saying.
@enterthetainment1832
Жыл бұрын
@@NotesAndVolts Dave buddy .... that's not even for a debate ..... It's a MUST LOL (also I DM-ed you on almost all the platforms insta FB please check it out)
@angelovintelservis
Жыл бұрын
Hello Dear Channel Creator - Notes and Volts! My name is Andrey - I live in Kazakhstan! I am a very big fan of your art, at the moment I only learn from your videos. Please help me! WHERE CAN I DOWNLOAD YOUR GERBER FILES FOR THIS PROJECT TO SEND THEM TO JLCPCB? I have little knowledge of PCB design - so I ask you to help me - send me a download link - gerber files! With respect to you - Andrey from Kazakhstan!
@prettypointlessvideo
3 жыл бұрын
They always say 5 boards for 2 dollars without includig shipping...
@Bodragon
4 жыл бұрын
I'm sorry but I don't like your design. For just a little more money you could have had a dedicated display for each fader at the top and dedicated buttons for editing at bottom. If there's one thing that really annoys me is pressing and scrolling through options. But that's probably just me. >
@23Guitardood
3 жыл бұрын
Not just you, I completely agree
@alanhightower976
4 жыл бұрын
Could have done a lot more with frontpanelexpress.com on that faceplate. Filled engravings, different anodized aluminum surfaces, photo printing, etc.
Пікірлер: 135