Hey guys, if you like the content, please consider supporting the channel below :D Buy me a coffee : buymeacoff.ee/gunplanewbie Twitter : twitter.com/gunplanewbieyt
@nofuxgivens2797
3 жыл бұрын
When you carve out those large areas and then place card pieces back in them...im not understanding why. Wouldn't it save time by just placing a thinner card on the original surface and scribe around it?
@GunplaNewbie
3 жыл бұрын
It might be faster to achieve but it's part of the design that I have in mind. In my thought process carving a wide area was easier than scribing a few notches around the plaplate design.
@nofuxgivens2797
3 жыл бұрын
@@GunplaNewbie I'm new to scribing and I'm just trying to find reasons for certain techniques and I find it more difficult to carve large ares like that. I can't control the depth very well. I also dont have tons of fancy tools. Where did you get the bit/tool to round off edges of panels/cut pieces?
@nofuxgivens2797
3 жыл бұрын
Also while I'm learning and have to correct mistakes...time starts to be an issue 😆
@GunplaNewbie
3 жыл бұрын
I think it's important to identify what you wanna do to achieve the design you have in mind. There are various ways to achieve the same effect so it depends on what you wanna try. In this episode, I wanted to try out lowering surfaces and plaplating. So you can see I explored that quite a bit in my design :D As for fixing mistakes, it's pretty much part of the process. I would say fixing mistake should be a priority for people looking to try out customization. Once you got that down then you're less afraid to try new things. After all, you can just fix it later :D
@vagabond2787
3 жыл бұрын
Bruh, you need to change your channel name to GunplaExpert lol. Amazing work like always, such crazy detail in the customizations!
@GunplaNewbie
3 жыл бұрын
:D thanks for the support! Nah, I still have a lot to learn. Please stay tune for more contents
@0supermoose804
3 жыл бұрын
This is exactly what I look for in build videos. Transformative, relaxing, and educational. Can’t wait to see how you handle the legs!
@GunplaNewbie
3 жыл бұрын
Oh my .. thanks! It's exactly what I wanted to showcase...as for the legs.. I kinda dread having to design and customize it.. lol
@Manictwig
Жыл бұрын
Best guides on KZitem. This is a fresh scribing / customisation style (from what I've seen) and a break for S lines everywhere. I will definitely be attempting to copy 😊😜
@DjagoChannel99
3 жыл бұрын
This is very patient process
@GunplaNewbie
3 жыл бұрын
Sure is but it's an enjoyable process overall ☺️
@TravisKelleher
Жыл бұрын
I'm new to Gunpla, I now see there are many levels to this craft, very inspiring!
@Rissien
3 жыл бұрын
One day... I am still just an out of the box builder. I am about to start delving into the realm of painting though, due to living circumstances will be limited to rattle can but seeing this.. One day!
@GunplaNewbie
3 жыл бұрын
We all gotta start somewhere and I too, started with rattle cans. Good luck and if you got any questions just fire away ☺️
@calebjanzen5658
3 жыл бұрын
For a newbie, yours suspiciously good at this🧐
@GunplaNewbie
3 жыл бұрын
Lol it's just a name at this point. But I legit still have a lot to learn 🤣
@Shin_Lona
3 жыл бұрын
No, sir... You are the Legend. Crisp. That magnetic stirrer though... 😆 I gotta get one now.
@GunplaNewbie
3 жыл бұрын
Oh wow... thank you for watching through the video :D I thought no one would do that lol I have a short review video on that magnetic stirrer... please check it out if you're interest :)
@user-ry9km2iv5x
3 жыл бұрын
so good good good! I wait next JESTA movie!
@GunplaNewbie
3 жыл бұрын
立ち寄っていただきありがとうございます。より多くの動画をお楽しみください!
@tylerhikara2905
3 жыл бұрын
“Here comes the pain” at the masking tape part got me really good , lol Craftsmanship was great and Loved the BGMs as well , dude’s got good taste xD
@GunplaNewbie
3 жыл бұрын
Thanks man. Seems like you've got good taste too :D
@nerios.v
3 жыл бұрын
insane editing and build and the tools, everything, awesome.
@GunplaNewbie
3 жыл бұрын
Thanks a ton!
@derek9047
3 жыл бұрын
Beautiful work my dude. Been loving this build. It’s tater
@GunplaNewbie
3 жыл бұрын
Thanks!
@Reddog08
3 жыл бұрын
Yea, gunpla newbie is an understatement. You sir are on another level. Good stuff.
@GunplaNewbie
3 жыл бұрын
Thank you!
@kaixiang961
3 жыл бұрын
Another epic customization video. Can't wait for the rest of the series.
@GunplaNewbie
3 жыл бұрын
Thanks 😊👍
@rexortuscano926
3 жыл бұрын
Yeeees my man been waiting for this!
@GunplaNewbie
3 жыл бұрын
Awww yeah thanks for the support!
@HiHoFai
3 жыл бұрын
Wow! I'm the first to comment! haha.. seriously nice video leh... keep it up!
@GunplaNewbie
3 жыл бұрын
Thank you 😁
@yuemoon9344
3 жыл бұрын
Damn, impressive as always, that crazy small details feels kimochi bruh... That HG/MG kit went straight to PG kit. Bravo mate!
@GunplaNewbie
3 жыл бұрын
Thanks 👍😊
@GundamCloseUpView
3 жыл бұрын
So many step and detail! Love it!
@GunplaNewbie
3 жыл бұрын
Thanks 😊👍
@niczpla7289
3 жыл бұрын
you inspire me, thank you :)
@GunplaNewbie
3 жыл бұрын
Ah thank you 🙂
@bongkem2723
3 жыл бұрын
that's a looooot of work !!! amazing !!!
@GunplaNewbie
3 жыл бұрын
Thank you... yeah it's a lot of work :D
@monochrome2363
3 жыл бұрын
Nice bro!
@GunplaNewbie
3 жыл бұрын
Thanks man :D
@monochrome2363
3 жыл бұрын
@@GunplaNewbie 👌🏻👌🏻👌🏻
@GunplaNewbie
3 жыл бұрын
Stay safe and take care bro. Selamat berpuasa!
@monochrome2363
3 жыл бұрын
@@GunplaNewbie Thanks! You too bro!✨
@beansworks1417
2 жыл бұрын
This is amazing work, glad I came across your channel. Thanks for sharing, instant subscribe!
@GunplaNewbie
2 жыл бұрын
Thank you ..I may upload slow but I'm still working on it :D
@beansworks1417
2 жыл бұрын
@@GunplaNewbie You’re welcome, slow is ok as long as the quality is great. I’m currently building a GM sniper II and these tips are perfect! Looking forward to more when you can.
@remylordski
Жыл бұрын
Legend
@huytran0613
3 жыл бұрын
Love you skill
@GunplaNewbie
3 жыл бұрын
Thanks 😊
@rhesamentari7371
3 жыл бұрын
I just bought jesta now i know how to upgrade mine. Tq
@GunplaNewbie
3 жыл бұрын
Let me know how it goes 🙂
@rhesamentari7371
3 жыл бұрын
@@GunplaNewbie bro, i dont have all the tools, so i only copy paste panel line with my pen chisel... dang bro, your detail is sick. It looks big on the video, but its quite small in the real life. Just finish today since i try to copy paste 7 days ago.. still waiting for the next video
@GunplaNewbie
3 жыл бұрын
Haha...yeah the scale on the video can be deceiving...I purposely shot the video this way so people could see what I'm actually doing ... But yeah in real life it's absolutely tiny... The next video will not be done anytime soon lol I'm still at the planning and designing phase ...Thanks for the support :D
@rhesamentari7371
3 жыл бұрын
@@GunplaNewbie keep up your good work 👍
@GunplaNewbie
3 жыл бұрын
Thanks 👍😊
@ucnguyenhuu1437
3 жыл бұрын
Still waiting for the next ep
@GunplaNewbie
3 жыл бұрын
I'm still working on it. It's almost finished 😃 thanks for waiting
@kevlthompson8130
2 жыл бұрын
Great video what is the tape called you use ?
@GunplaNewbie
2 жыл бұрын
Hello, sorry for the late reply. If you're asking about the scribing tape, they're the DSPIAE guide tape.
@yihong3944
3 жыл бұрын
where do u buy the pla plate cutter?
@GunplaNewbie
3 жыл бұрын
Here you go : amzn.to/3i6J3QB
@phat_gunpla_etc
3 жыл бұрын
what is the tool you use for cutting pla plate?
@GunplaNewbie
3 жыл бұрын
Here you go : amzn.to/3i6J3QB Also, most of the tools that I used are listed on the description section :)
@phat_gunpla_etc
3 жыл бұрын
@@GunplaNewbie thanks!
@GunplaNewbie
3 жыл бұрын
@@phat_gunpla_etc No problem! Ask away if there's any other problems (not because comments actually helps with youtube algorithm :P )
Пікірлер: 73