I just came upon this, Kasper. I think I'm going to repeat your build. I loved the drilled holes mistake - it was truly a human moment - and made the success that much sweeter. I don't understand the flight control systems out there, so I'm still doing research. I just wanted to tell you the video was great.
@kaspersorensen
6 ай бұрын
Hi Kurt Thanks, I really appreciate that. I hope you succeed in your build.
@taylormayhew369
3 ай бұрын
Hey thanks for the detailed parts list and the advice about the drill press!!!
@ajpereira2868
Жыл бұрын
The GPS being farther away from the electronics will help. You can also twist the cable for EMF mitigation.
@kaspersorensen
Жыл бұрын
I will try that!
@gabegutz1151
Ай бұрын
@@kaspersorensen did it work?
@RicardoReyes-hl6be
Ай бұрын
Only 320 likes he definitely deserves more
@X862go
Күн бұрын
So cool 😎
@alonzo2339
7 ай бұрын
Great build! Glad you went into detail in the manufacturing process. Would you mind sharing what dimensions you cut your carbon fiber arms and landing gear to? I'd like to do a similar build.
@kaspersorensen
7 ай бұрын
Thanks man. The legs are 25 cm, and the arms protrude 32 cm from the hub so their total lenght is about 35 cm
@markwilliams6200
16 күн бұрын
Kasper, great video. I am having trouble finding Tom's design files, can you send me a link?
@slyasastech
4 ай бұрын
Use the naza m lite FC you will never hve flip over problems😊
@boxgreen333
21 күн бұрын
what's the time of this drone to fly
@Richie-t5p
20 күн бұрын
Hi, great drone! How did you calculate how much battery you needed as far as amps and mah
@1993VolkswagenPassatGLXVR6
3 ай бұрын
I was planning to build myself a massive drone with a separate propellor in the rear, like a mashup behind a mq9 and a drone, but my 3d printer crapped itself, so I have to buy a new one.
@hielkovisser4753
Ай бұрын
maby some cushoning in the legs but great video and great build, and he I am just a backseat driver ha
@caldercleavelin
Жыл бұрын
Great video, thanks for taking the time to make it. I'm working on designing my own heavy lift system based off of this design, and I have one question about your arm mount issue at 7:40 - would it have worked to simply shim the top plate up with some washers to give the proper clearance over the arms? As I understand it, angled arms offer some stability advantages. Is there any reason why some washers or a slightly taller top half of the arm mounts would have caused problems?
@kaspersorensen
11 ай бұрын
You are right, and I also think washers could have solved it, still I believe it is a design flaw.
@magiliangaming
24 күн бұрын
How much weight can this thing lift?
@josephherring4633
4 ай бұрын
Kasper - great video! Do you have any issue running those motors with the 4-in-1 50A esc? I have the same FC/ESC combo and I am considering reproducing your build in the next few weeks.
@AaravBlogs394
Ай бұрын
Do you have a wiring diagram? I am trying to figure out the wiring between the receiver and the speedy bee, and the DJI unit with the speedy bee.
@wompstopm123
Күн бұрын
It's doesn't need to be carbon fiber or CNC machine. Aluminum is just as good
@porte3530
4 сағат бұрын
it’s heavier
@robertparrish5542
Ай бұрын
Hi grate build.
@a2js2
19 күн бұрын
Would you sale a kit?
@eprohoda
Жыл бұрын
Kasper! interesting ,📽
@kaspersorensen
Жыл бұрын
Thanks!
@Gutentag-tr5hr
Ай бұрын
Can I put M2 Browning on it?
@robertparrish5542
Ай бұрын
Is it possible to contact you ? I have some questions. As i am looking to build my own drone as well.
@BB-cw2ru
2 ай бұрын
Hey how do I inquire about a purchase?
@jjmcwill1881
9 ай бұрын
HOW MUCH IS THE BUILD
@kaspersorensen
8 ай бұрын
About 1000 USD excluding radio and DJI goggles. If you have a 3D printer you can shave about 200 dollers off.
@asmrworld8301
8 ай бұрын
I want to start a business so that why i need drone
@timlehnhardt6980
8 ай бұрын
If you buy a drone at the beginning its easier to start
@anismessaoud131
9 ай бұрын
Can u share the 3d file please, id like to build it
@kaspersorensen
9 ай бұрын
www.thingiverse.com/thing:4089842
@hoangvanthong8493
6 ай бұрын
What is the maximum weight it can lift?
@kaspersorensen
6 ай бұрын
I have not done any max test, but it easily lifts 2,2 kg.
@JoshByrd-Nashville
8 ай бұрын
How much does the whole thing weigh?
@kaspersorensen
8 ай бұрын
Hi Josh Total flying weight is 2850 gram. Where the batteri is 750 gram of that
@yoyogi52
Жыл бұрын
How much can it lift
@kaspersorensen
11 ай бұрын
I have not done any max test, but it easily lifts 2,2 kg.
@woodpeckereconomics
Жыл бұрын
Have you tested its payload yet ?!
@kaspersorensen
11 ай бұрын
I have not done any max test, but it easily lifts 2,2 kg.
@ProspectorFrank
4 ай бұрын
@@kaspersorensenDo you mean 2.2 KG ?
@mokshthesaxlord527
9 ай бұрын
How much does it cost?
@kaspersorensen
8 ай бұрын
About 1000 USD excluding radio and DJI goggles. If you have a 3D printer you can shave about 200 dollars off.
@mokshthesaxlord527
8 ай бұрын
@@kaspersorensen sick man! thats quite a bargain for a drone with such great utility. nice work
Пікірлер: 48