What a super nice job,u have a lot of patience,I respect you for that,Excellent
@DanDModels
4 ай бұрын
Thank you ! 👍
@ableaquariums5480
4 ай бұрын
Fantastic! Thanks for sharing. Please make more videos on the techniques of you can. There are a million videos on painting model car but so few on these low rider paint styles. A series the whole way through a paint project would be great. Thanks again. Looks brilliant.
@theintake8961
3 ай бұрын
Beautiful work Dan! Incredible patience! 😎👍
@DanDModels
3 ай бұрын
Thank you 👍
@benmisner6457
4 ай бұрын
Had to comment again at the end of the video once again amazing sir
@DanDModels
4 ай бұрын
Thank you! 👍
@mrupscale
4 ай бұрын
Great job! that is some amazing paint work for sure!
@DanDModels
4 ай бұрын
Thank you! 👍
@2shoestoo
4 ай бұрын
Stunning work 👏👏👏
@DanDModels
4 ай бұрын
Thank you! 👍
@daviddebaca
4 ай бұрын
Wow! Amazing! What a great paint job, and on a 69 Cadi, that's even better.
@DanDModels
4 ай бұрын
Thank you 👍
@burgas_color_chrome
4 ай бұрын
AWESOME work. Great inspiration for someone getting back into modeling after 30+ years. I'll be posting my first rebuild of my 1980 Turbo Trans Am soon. New Subscriber.
@DanDModels
4 ай бұрын
Sounds like a cool build, and Thank you! 👍
@troydowning3302
4 ай бұрын
Thats patience at its best. Talented bro great work
@DanDModels
4 ай бұрын
Thank you! 👍
@rickzinck9326
4 ай бұрын
I just found your channel. Awesome paint work!
@DanDModels
4 ай бұрын
Thank you! 👍
@Sparkysmodelsalvage
3 ай бұрын
I wish I had this kind of skill. I can only do weathered and wrecked. Lol
@AAWOLFE-zc6ly
4 ай бұрын
get out of my head, i just finished watching low-rider paint jobs and was thinking of doing it scale model 1/25th... thank you thinking of doing some aluminum patterns too... should work.
@modelcar1589
4 ай бұрын
Awesome paint job 👍🏿
@DanDModels
4 ай бұрын
Thank you! 👍
@markjolyn94
3 ай бұрын
Great paint work!! Look's amazing
@DanDModels
3 ай бұрын
Thank you! 👍
@jrsscalemodelz4378
4 ай бұрын
Awesome work & video 👍🏻
@DanDModels
4 ай бұрын
Thank you! 👍
@tomkendall4079
2 ай бұрын
Amazing work and talent. I just picked up a bunch of Createx paint and I'm excited to try it. I've been checking out your vifs for ideas and tips.
@DanDModels
2 ай бұрын
Nice, make sure you are mixing the paint with the Createx 4030 or 4050 for strength. Thank you 👍
@CwalkEntertainment
4 ай бұрын
Amazing work 👌🔥🔥
@DanDModels
4 ай бұрын
Thank you 👍
@garyfishel9612
4 ай бұрын
Fantastic Dan! I just finished the '58 Star Chief that I bought from you. Wanted it white with Tropicana turquoise cove and roof. I sprayed Nason 2 stage clear right over the bare white resin with no problem! On a scale of 1 to ten, your cars are a solid 12!
@DanDModels
4 ай бұрын
Thanks 👍
@robertdiaz9297
Ай бұрын
Beautiful
@DanDModels
Ай бұрын
Thank you 👍
@ToddHLHG
4 ай бұрын
dang this is a great video! Thank you for sharing...I have subbed to your channel
@DanDModels
4 ай бұрын
Thank you! 👍
@Jay-gv9pi
2 ай бұрын
AWESOME!
@DanDModels
2 ай бұрын
Thank you 👍
@TI4438
4 ай бұрын
Seriously awesome paint work.
@DanDModels
4 ай бұрын
Thank you! 👍
@stevecourtneyscalekustomz2602
4 ай бұрын
Looks great
@DanDModels
4 ай бұрын
Thank you 👍
@nathanielbemis2109
4 ай бұрын
Hello DanD, There is a TON of oppurtunity for paint to bleed beneath tape here. Do you have a strategy to mitigate that? A ton 'o burnishing? A clearcoat spray after laying in the mask? Please give a few technical bits? BTW - it's lovely to see. Looking forward to seeing it completed.
@jimmyb6842
3 ай бұрын
Wow
@moparnut6286
4 ай бұрын
Awesome!
@DanDModels
4 ай бұрын
Thank you! 👍
@goforitpainting
3 ай бұрын
WOW
@thescalemodelcarguychannel8681
4 ай бұрын
Amazing paint brother ❤😊
@DanDModels
4 ай бұрын
Thank you! 👍
@hortonshotrodshop2003
4 ай бұрын
Dropped you a sub nice work
@DanDModels
4 ай бұрын
Thank you 👍
@hortonshotrodshop2003
4 ай бұрын
@@DanDModels super sharp paint lines where did you get tape that thin
@Jimmy-sb3fc
Ай бұрын
Wow, that's some phenomenal work right there! Hey, where do you get masking tape that thin? Thanks!
@DanDModels
Ай бұрын
I cut the masking tape down to size. Thanks 👍
@johnconnor_513
4 ай бұрын
Looking good! Did you clear in between colors? Creatix always peels when i try to back mask.
@DanDModels
4 ай бұрын
If you are having pealback problems I would recommend making sure you are adding the 4030 or the 4050 in with your color, it should take care of any adhesion problems. The only clear I spray in-between paint is some of the 4050 if I think a area needs a little more protection. Thanks! 👍
@thebeardedguyjefflawless5887
2 ай бұрын
Just found your channel and subscribed 😀...........loving the paint work
@DanDModels
2 ай бұрын
Thank you 👍
@Memorylanemodelcars2
4 ай бұрын
Nice Job but Better Lighting Would Helo Video Display Better
@kdkustoms
3 ай бұрын
Awesome work Dan!! What tape do u use?
@pappytinkers
4 ай бұрын
I thought i recognized that Tealalicious color, i did a 442 with it last year. Awesome job with that caddy!! What did you spray the metal flake with, it looks too big for most airbrushes? And where did you get that from? You have some skills, and a sub!
@DanDModels
4 ай бұрын
You are right, you can not spray the flake with a airbrush. When I spray .004 flake I use a tuch up paint gun with a 1.0 tip size, And use createx 4030 as the carrier. Thanks 👍
@pappytinkers
4 ай бұрын
@@DanDModels thank you! I'm gonna have to give that a try. Was that a Canadian accent I heard?
@hugheskirby
4 ай бұрын
Way cool video Dan! What kind of tape are you using? I am loving your work!!
@DanDModels
4 ай бұрын
The tape used on this car is the hobby lobby brand, it's a lot like the Tamiya masking tape. Thanks! 👍
@roderickjones1283
4 ай бұрын
Awesome!! What kind of tape you use?
@DanDModels
4 ай бұрын
I use a few different kinds, but on this paint job I used the hobby lobby brand. It is a lot like the Tamiya masking tape. Thanks! 👍
@roderickjones1283
4 ай бұрын
@@DanDModels yea I bought the yellow kind it works well on models font leave that residue look
@shsvoboda
4 ай бұрын
does the tape come that thin or did your trim it down yourself? I'm new to custom painting and not sure where to find tape that thin.@@DanDModels
@DanDModels
4 ай бұрын
@shsvoboda its regular size. It's got to be cut down. 👍
@shsvoboda
4 ай бұрын
how do you cut it down? Is there a trick?Thanks!!! @@DanDModels
Пікірлер: 73