Don't forget to click the *Show More* link above for the SHX font download!
@srae40
8 ай бұрын
OK, I don't know the problem with me here, but cannot find the link for the SHX Fonts, I am new to all this laser and such, and has increased my use of KZitem so I know about expanding the section from the presenter. But mine shows no link, The actual expander is just ...more, so I don't even have the show more. Am I missing it or just losing it? thanx
@TheKennMan88
7 ай бұрын
@@srae40Same here.
@rafaelcueva6786
8 күн бұрын
Thanks for you great tutorial, can you display to customise the Palette bar in a vertical position. Thanks
@LegrejLeforlivet
11 күн бұрын
You´re my absolute favorite Lightburn teacher. You make it at a speed and so detailed, that even I, as one with minor IT-skills is getting into the laser world with solid comfort. Thanks a lot.
@TheLouisianaHobbyGuy
11 күн бұрын
Wow, thanks!
@AcryliWoodDesigns
2 ай бұрын
Thanks Rich! Sometimes you forget how to do this stuff. The reset to default layout was quick and very helpful!
@TheLouisianaHobbyGuy
2 ай бұрын
Glad it helped!
@user-ho7fs7vw6q
3 ай бұрын
Thank you so much. You saved me from resetting my whole program.
@TheLouisianaHobbyGuy
3 ай бұрын
You're welcome! If you liked this video, this one is a must! kzitem.info/news/bejne/tKqvvmSErWZenn4
@trevorcarter9036
10 күн бұрын
Thank you. This made setting up some of my tools a bit easier.
@TheLouisianaHobbyGuy
10 күн бұрын
Glad it helped Trevor!
@bigfranksworld
4 ай бұрын
Thanks Rich. I updated Lightburn recently, and all my tabs went away. This video fixed that. Thanks for all your work and help to the community
@TheLouisianaHobbyGuy
4 ай бұрын
Glad to help!
@karlriley1314
Жыл бұрын
This is exactly why I watch these video's, you HELP us NEWBIES a lot. I was having a problem with this exact issue and now it's all explained. Thanks a lot Rich. I love this channel.
@TheLouisianaHobbyGuy
Жыл бұрын
Believe it or not, I come back and watch a lot of the videos I make as "refreshers". 🤪 Lots of things slip my mind as I get older!
@karlriley1314
Жыл бұрын
@@TheLouisianaHobbyGuy HAHA, so do I. hehe
@sigh_of_the_times
6 ай бұрын
I'm glad I watched this video it fixed an issue I had.
@TheLouisianaHobbyGuy
6 ай бұрын
Awesome! 👍 Thanks for watching!
@BW-xz6ol
11 ай бұрын
You are the man. I’m cruising the videos. Ty
@TheLouisianaHobbyGuy
11 ай бұрын
Thanks so much!
@dkolars
4 ай бұрын
Thanks... I've never had the tabs, even with a new install on Win 10 on HP laptop!! Screen will be a LOT less crowded now!!
@TheLouisianaHobbyGuy
4 ай бұрын
Awesome! 👍 Thanks for watching!
@gwenbest9375
6 ай бұрын
Thank you for all your help!!!!
@TheLouisianaHobbyGuy
6 ай бұрын
Happy to help!
@sharonsimonson5392
Жыл бұрын
Thanks, that will help a lot!
@TheLouisianaHobbyGuy
Жыл бұрын
Glad it helped Sharon!
@davidelder5399
Жыл бұрын
Great video, Rich I was just looking the other week at one of your older videos regarding visual grid spacing as i was struggling with nudging things closer together. This was a great refresher for us newbies 👍
@TheLouisianaHobbyGuy
Жыл бұрын
Glad it was helpful David! These are some of my most asked questions.
@slowpilot6817
Жыл бұрын
Hey Rich! Another direct hit! You have covered most of this in one or another videos, but this was a great sub 10 minute refresher - exactly what I needed. Also, THANKS for the great review of the Roly!!! Just got mine set up and looking forward to burning things with light 🙂
@TheLouisianaHobbyGuy
Жыл бұрын
Awesome, thank you! You're going to love the LaserMATIC 10!
@BigHWorks
Жыл бұрын
Very good tutorial Rich! I am not a newbie to Lightburn but I found this to be a very helpful video. Thank you.
@TheLouisianaHobbyGuy
Жыл бұрын
Glad it helped! Sometimes just a refresher makes you remember little things you forgot!
@Essentialvideophoto
Жыл бұрын
Hi Rich. There are always some tricks and favours that come with the time of using it. Thank you for making it available for us with out the time we would have to spend it on getting that experience. You are awesome. 🙏👍
@TheLouisianaHobbyGuy
Жыл бұрын
Glad it was helpful Bob! I was giving myself a refresher course! 🤪
@ericeinsmann5559
Жыл бұрын
Very helpful video! Thanks!
@TheLouisianaHobbyGuy
Жыл бұрын
You're welcome Eric! Thanks for watching!
@brunocampos8841
Жыл бұрын
Top as always 👌
@TheLouisianaHobbyGuy
Жыл бұрын
Thanks Bruno✌
@emacmillen
10 ай бұрын
Great info! Thank you.
@TheLouisianaHobbyGuy
10 ай бұрын
Glad it was helpful!
@damarysgonzalez63
11 ай бұрын
Thank you so much for putting in the time and effort on these videos, to help us who aren't as savvy with these things out. Awesome job as always
@TheLouisianaHobbyGuy
11 ай бұрын
You are so welcome!
@patrickdjebar9225
Жыл бұрын
Very usefull many thx
@TheLouisianaHobbyGuy
Жыл бұрын
Glad it was helpful Patrick!
@bryanblissett2066
Жыл бұрын
Hey Rich, you are so correct about some laptops being a challenge, mine is in this category, thanks again for another great video, you are the man! :)
@TheLouisianaHobbyGuy
Жыл бұрын
Glad to help Bryan!
@ericeinsmann5559
Жыл бұрын
Hey Rich, you probably already know this... But just in case you don't... If you double click the frame button in lightburn, it will frame twice.. Forgive me, but I found it by accident and it actually comes in handy.
@TheLouisianaHobbyGuy
Жыл бұрын
Only on some machines, that's why I don't mention it.
@rickpouley2857
Жыл бұрын
Than you very much for this video.. You answered my biggest question about the set up of my screen, and why mine looks so different than yours or other peoples screens!
@TheLouisianaHobbyGuy
Жыл бұрын
Yes Sir! Thanks for watching! 👍
@alakaolushola5556
9 ай бұрын
Thanks very much
@TheLouisianaHobbyGuy
9 ай бұрын
You are welcome
@carmenvittoni5580
6 ай бұрын
Thanks!
@TheLouisianaHobbyGuy
5 ай бұрын
You bet! Thanks for the support! 👍
@lonniedupont
Жыл бұрын
Good one
@TheLouisianaHobbyGuy
Жыл бұрын
Thanks Lonnie!
@michaelgonzalez8863
Жыл бұрын
Thank you
@TheLouisianaHobbyGuy
Жыл бұрын
You're welcome Michael! Thanks for watching!
@davidlinzenmeyer6748
Жыл бұрын
Great video Rich. How do I set my Frame Speed?
@TheLouisianaHobbyGuy
Жыл бұрын
The speed setting on the Move tab David.
@oldguyonacouch7216
4 күн бұрын
I struggle with tabs on my laptop. As you mentioned some laptops don't play nice with lightburn. Mine is one of them. own a Toshiba Tecra A50-E, 15,6”- Intel Quad Core 8th Gen i7- 8650U-32GB RAM-Super Fast 1TB M.2 SSD, Full HD - 1920 X 1080 - Windows 11 Pro. It does get very frustrating trying to find a tab that has a check mark and is no where to be found.
@TheLouisianaHobbyGuy
3 күн бұрын
Yeah, anything less than a 17" screen is not going to work right. This is why I tell everyone to use a dedicated desktop. A good Core i5 can be sourced used on eBay for around $100.
@luvwud
Жыл бұрын
Thanks Rich far better explanation than the lightburn version of the tabs . Why did lightburn make minimum screen resolution over 800 in the vertical which makes tab setup challenging on a laptop. Cheers Geoff
@TheLouisianaHobbyGuy
Жыл бұрын
I really don't know.
@savagekoaladesigns
Жыл бұрын
Thank you for another great video Rich! I lost my cut layers color tabs on the bottom of my screen and can't get them back! I was hoping this video would show me but I am stuck...HELP!
@TheLouisianaHobbyGuy
Жыл бұрын
Oh no! Click on *Window* from the top menu and _Cut Palette_ is likely not checked. *Click on it* to make it reappear.
@uwelin
Жыл бұрын
Danke!
@TheLouisianaHobbyGuy
Жыл бұрын
Yes Sir! Thanks you so much for your support! 👍
@wizard1963uk
Жыл бұрын
brilliant
@TheLouisianaHobbyGuy
Жыл бұрын
Thanks moondog!
@vincentlekei1969
Ай бұрын
Nice 👍 okay how can you move the layers tool bar the colour one at the bottom ?
@TheLouisianaHobbyGuy
Ай бұрын
Click and drag the vertical dots all the way on the left side, next to 00.
@vincentlekei1969
Ай бұрын
@@TheLouisianaHobbyGuy oh My thanks 😊 I would not have found those dots there. Found the other ones. Thanks again HobbyGuy
@MT-rg4dm
Жыл бұрын
Can you do a video on Homing your laser my limit switches keeps triggering
@TheLouisianaHobbyGuy
Жыл бұрын
I don't really know what that means; they're supposed to trigger. Try posting more details on my free forums. lahobbyguy.com/bb
@teddodgin9644
Жыл бұрын
Thank you a Bunch! This helped out. One question. The Order of the engrave is not working on the new update on LB? Any suggestions?
@TheLouisianaHobbyGuy
Жыл бұрын
The order works for me. If I put the cut below the graphic in the Cuts / Layers tab, it engraves first and then cuts, and vice versa. If you're having an issue, you can post on the Lightburn forum and a technician will help you Ted.
@blackknights54
4 ай бұрын
Awsomw Video. thank you I just have one questions (How do you get the cross hatches to appear on the screen on the work area?
@TheLouisianaHobbyGuy
4 ай бұрын
Window --> Filled Course
@blackknights54
4 ай бұрын
@@TheLouisianaHobbyGuy when i pick filled course the cross line don't appear
@TheLouisianaHobbyGuy
4 ай бұрын
Click the gear icon and turn on Show work area center cross.
@blackknights54
4 ай бұрын
@@TheLouisianaHobbyGuy Perfect thank you so much
@randyday3278
Жыл бұрын
Good Video Rich. You mentioned that some laptops have a hard time docking windows. Sometimes mine does too. What laptop and resolution do you use?
@TheLouisianaHobbyGuy
Жыл бұрын
I have a 17" Dell at 1920x1080. It works perfectly at this resolution Randy. Screen size is where the bug comes in. I get bugs sometimes on my 15" and taking it out of full screen helps.
@KE4YAL
Жыл бұрын
I just added extension kit to my Ortur Laser Master Pro 2 I need help with configuring in LightBurn it says Change the "Value" of the "$131" line to 800 and click "Write" to save.where do I find this settings? Any help would be appreciated Great video thanks for all your hard work
@TheLouisianaHobbyGuy
Жыл бұрын
Edit --> Machine Settings
@KE4YAL
Жыл бұрын
@@TheLouisianaHobbyGuy thanks
@julieflynn4540
2 ай бұрын
how do you change the artboard size
@TheLouisianaHobbyGuy
2 ай бұрын
If you mean the work area, you don't. The manufacturer tells you the size.
@scotc.etling4666
16 күн бұрын
Hopefully you can help....I keep getting "ALARM:2 G-code motion target exceeds machine travel. Machine position safety retained. Alarm may be unlocked. (Right click on the "Device: button to reset the connection). I do that and the alarm happen again shutting down the burn. Usally it happens as soon as I hit start....Any suggestions?
@TheLouisianaHobbyGuy
16 күн бұрын
Try this video: kzitem.info/news/bejne/z6uJwIJ7qKOaio4
@scotc.etling4666
15 күн бұрын
@@TheLouisianaHobbyGuy Thanks for the help! I have an Ortur Master 3. I did everything you said in the video. I made sure the frame was square; the belts were tight. I reduced my bed size to 395 x 395 and I am still getting the error. I did notice that the LED light on the machine is green, then flashes white then yellow. I traced that back to a SD card instillation error. But I am at a loss. It was working, but no matter what I try to run, it shuts down immediately with this error.
@NeoPest
Жыл бұрын
hey there thanks a ton for posting this Rick! i am new to lightburn and found it a little cumbersome till this. i have a question that’s unrelated. is the d1 module compatible with other frames and controllers (i can change wiring harness and add 24v psu if needed myself) or is there something about it that makes it proprietary? i have a sculpfun frame and a chance to score a free d1 module from someone but don’t know if it can play with the controller
@NeoPest
Жыл бұрын
Rich.. sorry my uncle is Rick and it autocorrected lol
@TheLouisianaHobbyGuy
Жыл бұрын
I don't know. I don't like xTool or use their products.
@NeoPest
Жыл бұрын
@@TheLouisianaHobbyGuy thanks. any particular reasons? you have me now wondering if i should skip the freebie to avoid headaches lol
@larryseguine6670
Жыл бұрын
Thanks!
@TheLouisianaHobbyGuy
Жыл бұрын
You bet! Thank you for the support! 👍
@bruceolsen9639
Жыл бұрын
Thanks!
@TheLouisianaHobbyGuy
Жыл бұрын
You bet Bruce! Thank you for the support! 👍
@markpatterson3189
Жыл бұрын
Thanks!
@markpatterson3189
Жыл бұрын
Thanks Rich, wish I had found this video sooner, a big help. I have figured out a lot in the last year on my own and through KZitem. Keep up the great work!
@TheLouisianaHobbyGuy
Жыл бұрын
Thanks so much for the support Mark! Much appreciated!
Пікірлер: 108