Watched a lot of videos on scroll saw stuff, i really enjoy watching you work. Thanks show sharing w us!
@Mytoya2
Ай бұрын
@@wolfitgood Thank you for watching! How long have you been scrolling? And what saw do you have?
@keithdavison5578
3 ай бұрын
Nice and crisp cutting beautiful work I really love your work ❤❤
@Mytoya2
3 ай бұрын
Thank you so much!
@mtz3843
2 жыл бұрын
ive been scrollsawing for over 20 years and i enjoy watching your work, nicely done.
@Mytoya2
2 жыл бұрын
Thank you so much!🤗
@robsmith3200
23 күн бұрын
Lovely work & well explained. Thank you
@Mytoya2
22 күн бұрын
@@robsmith3200 Thank you! 🤗
@MikeyDonna
Жыл бұрын
Long time wood working, short time scroller here. Like most who start out I struggle learning all the ins and out of scrolling . For me the thing I had to wrap my head around was years of having wood stationary and moving the saw , now the saw is stationary and the wood is moved. Sounds like a no brainer but years of muscle memory make the change difficult. Once this is over come the rest came easier.
@Mytoya2
Жыл бұрын
Hi there, I would love to see some of the woodwork you have been doing for a long time. You are correct. Muscle memory is hard to change. For me it's spiral blades. I am so use to flat blades. Find me on Instagram or Facebook and send me pics of you can. I am Mytoya Pritchett on Facebook and MytoyaNcalifornia on Instagram.
@wolfitgood
Ай бұрын
@@Mytoya2totally going to find your IG page
@davidsandford8343
8 ай бұрын
Never scrolled in my life, but I am picking one up tomorrow. You are great!
@Mytoya2
8 ай бұрын
Hi there,🤗Which saw are you getting?
@davidsandford8343
8 ай бұрын
Hi, I am picking up my Ryobi in the morning (Sunday in Australia) a 16"@@Mytoya2
@Mytoya2
7 ай бұрын
@@davidsandford8343 How's the scrolling going with your new saw?
@davidsandford8343
7 ай бұрын
@@Mytoya2, I have it here, but still building my woodworking shed! Been heatwave conditions in Australia, so work is slow
@georgebarnes9837
Жыл бұрын
Have just discovered your channel and love it. Especially the fact you show and tell what and how without beating a subject to the ground.
@Mytoya2
Жыл бұрын
Welcome and Thank you for your kind comment! 🤗 How long have you been scrolling and what saw do you have?
@janetgilmore5930
2 жыл бұрын
You’re back! I’ve been looking for new content from you, Mytoya2. Love the way you describe things “spinny things” is my favorite.
@Mytoya2
2 жыл бұрын
Hi Janet, it's good to be back! 🤗
@swccbakersfieldca2076
2 жыл бұрын
You are amazing. You make it look so easy. 👍🏼
@Mytoya2
2 жыл бұрын
Thank you so much! 🤗
@oldave100
2 жыл бұрын
Those are so cute. You have a very steady hand and a lot of patience.....Vicki
@Mytoya2
2 жыл бұрын
Thank you so much! Still looking forward to getting together with you guys. Don't forget to let me know when you guys are meeting up in AZ.
@mrnobelnigel
2 жыл бұрын
Love the project and watching you work. Just started scrolling and I’m learning a lot from your videos. Thanks 🙏
@Mytoya2
2 жыл бұрын
Welcome to the scroll saw community! 🤗 Feel free to contact me if you have questions.
@mrnobelnigel
2 жыл бұрын
Thank-you. 👍
@user-gp1vc1rp6h
6 ай бұрын
leaving the butterfly until last seed easier but you did make it look easy; thanks for the tips
@Mytoya2
6 ай бұрын
Thank you!
@stephendickinson9929
7 ай бұрын
I haven't scrolled for a few years but I completed great deal of projects on my Hawk. You are a very good scroller.
@Mytoya2
7 ай бұрын
Thank you so much! 🙏🏾 What are your favorite things to scroll? I love doing fretwork.
@stephendickinson9929
7 ай бұрын
I made a lot of jigsaw puzzles for the grandkids and friends. I don't have much interest in working with wood now tho.
@Mytoya2
7 ай бұрын
@@stephendickinson9929 I understand. 🙏🏾
@rayscrafield2106
9 ай бұрын
Very nicely done Mytoya. Love your soft voice.
@Mytoya2
9 ай бұрын
Thank you! ❤️
@carnutal3627
11 ай бұрын
Beautiful work. You’ve inspired me to do a similar project for my wife’s 70th bday. Thanks for your very thorough video! Alan in Sarasota Fl.
@Mytoya2
11 ай бұрын
You're welcome! 🤗 I would love to see the project when it's done.
@raulaguirre71
11 ай бұрын
Beautiful work. May God bless you!!!
@Mytoya2
11 ай бұрын
Thank you so much!
@ramonchavez5005
7 ай бұрын
excellent work love those desk top names. i started scrolling about 3 months ago. you make it look easy. i hope i get better. i have a delta 40-640. very old machine. got it for $40. fixed the blade holder and Im now addicted to scrolling will follow you for tips and inspiration. hopefuly ill be able to get a dewalt. theyre expensive. keep up you beautiful work
@Mytoya2
7 ай бұрын
Hi friend, Thank you for your kind comments! what kind of things are you making? I love doing fretwork. I've been scrolling since the year 2000. I've always made things that people ask for. As of this year I will no longer do custom orders. I'm going to go back to doing intricate scrolling which makes me happy. I'd love to see some of your work. I'm also on Instagram tiktok and Facebook. I will be posting again soon. Right now I'm working on a horse trailer. I'm trying to convert it into my mobile wood shop.
@roberthemmingway5538
7 ай бұрын
Great work, you make this look so easy. I'm just starting out and I love what can be done with a scroll saw.
@Mytoya2
7 ай бұрын
Thank you for your kind comment! What's your favorite out of all the things you've scrolled? I love doing fretwork.🥰
@roberthemmingway5538
5 ай бұрын
@@Mytoya2 I use my scroll saw to create names for my jewelry boxes. I'm learning that there are other uses for this tool as well.
@roberthossack286
2 жыл бұрын
absolutely brilliant,rob.
@aaronlingenfelter1055
7 ай бұрын
I love the idea of the larger scrolled projects. My tendency is things like Christmas ornaments with way too many insertions and blades like .5 pencil lead. Just curious where those patterns came from. I'd like to do something similar for my step daughter but don't know where to start. Thanks for the relaxing video!
@larryearly5916
Жыл бұрын
I loved them both. What a nice job.
@leadminer4957
2 жыл бұрын
Beautiful work ! Really like the font too.
@Mytoya2
2 жыл бұрын
Thank you!🤗
@GabiFodorrasRO
Жыл бұрын
Congratulations on what you do !!!
@Mytoya2
9 ай бұрын
Thank you!!
@daviddavis6065
2 жыл бұрын
hi i liked the frist one i think it is safer its was nice watching you cut it out i would love to do that am think about get a scroll saw what a nice video as well
@Mytoya2
2 жыл бұрын
Thank you! ❤️ So what saw are you looking at? Make sure your saw accepts pinless blades.
@JeffreyFeyh-rb4xk
8 ай бұрын
The first butterfly was smoother. With the second name your hands were really close to the blade as you said they would be. Next time you could leave the board longer at the end so you can have something to hold onto. But your work is outstanding thanks for sharing.
@luisvillarreal2516
Жыл бұрын
hola amiga me encantan tus trabajos desde que te vi en pinterest te sigo Dios te bendiga
@Mytoya2
Жыл бұрын
¡Hola y bienvenido!
@jffqnn
Жыл бұрын
I always love to watch your tutorials!! I need to get more practice in Scrolling. Seems like I always have something else I need to do and end up going days without doing anything on the Scroll Saw. Certainly appreciate the recommendations when it comes to what blades work best!! I'm going to try to make some puzzles out of Laminate Flooring. Seems to hold together pretty well even after being subjected to immersion for over two weeks. Anyway, I just wanted to Thank You for Your Tutorials and Suggestions for Blades. I'm assuming that Laminate Flooring and the material You're using are basically the same composite material. I couldn't remember the name of the material You're using for some reason, my mind went completely Blank... LoL
@wolfitgood
Ай бұрын
How do you turn corners so smoothly. When i get to a corner my blade will try to turn with it or it doesn't catch at the right place. You make it look effortless
@roberthossack286
2 жыл бұрын
hi mytoya, plz make some more videoes, best on youtube. ty rob. UK.
@Mytoya2
2 жыл бұрын
I will post another video this week. I have a question for you though. Where are you getting your patterns from? Or what program are you using to make your patterns?
@hangingoutwithronwalters4505
Жыл бұрын
I just subscribed!
@Mytoya2
Жыл бұрын
Thank you and welcome!
@sheilaegeland
2 жыл бұрын
You did this project like a breeze. Wow Very impressive. Excellent job Can you share the brand name of your scroll saw please
@Mytoya2
2 жыл бұрын
Thank you! My saw is a DeWalt 788.
@amccauley68
2 жыл бұрын
Thank you so much for your clear explanations! I love to watch you work! My saw is still in the box and I am trying to learn from experts like you before I begin. My question is, what kind of wood should I start with? I want to do wall art, like words on signs for a 3D look.
@Mytoya2
2 жыл бұрын
Go ahead and pull that saw out of the box. I'm doing a video soon on the scrollsaw books and magazines I have. I will also explain the struggles I had when I started 20yrs ago. I recommend using 1/4 MDF or soft wood and practice the pattern in this link. kzitem.info/news/bejne/xY6Vyqycn4N5fWk if you need the pattern find me on Instagram. My name is MytoyaNcalifornia there. Once you get the hang of the scrollsaw you will be hooked.
@pamelabrissenden606
7 ай бұрын
Love your names, is there some place to order the patterns? I have 2 new grandsons!
@Mytoya2
7 ай бұрын
No. I made them with the free Silhouette program I speak about on 2 of my other videos. If you find me on Instagram or Facebook I can make patterns for the 2 names and send them to you via messenger or in the Instagram direct messages. 🤗
@CALLSIGNSAWDUST
Ай бұрын
Nice work. I a new to the scroll saw and it seems that when I turn the wood, the blade also turns. How can I fix this. You make it look so easy. Lol
@Mytoya2
Ай бұрын
@@CALLSIGNSAWDUST Hi there, welcome to this scroll saw world! What kind of School saw are you using? What size blade? And how fast is your speed going? I need a little more info to answer your question.
@user-hx3pr5wz8h
9 ай бұрын
Impressive 😊, im new to wood working, could you please tell me the kind of wood you are using for the name plate projects
@Mytoya2
9 ай бұрын
Thank you and welcome to the scroll saw community! I am using pine from Home Depot. Pine is a soft wood and easy to cut.
@michmvp
3 күн бұрын
Nice work. I haven't done this yet. How do you make your patterns for these.
@Mytoya2
2 күн бұрын
@@michmvp Hi there, I use a free program called Silhouette. You can find it at silhouetteamerica.com/program if I'm not mistaken. Here is one of my videos using silhouette. kzitem.info/news/bejne/uWissWl6pHN4Y6wsi=niCz_XfiO_SOVjHq
@michmvp
2 күн бұрын
@@Mytoya2 Thanks
@gailjohnson3544
9 ай бұрын
Very nice. How thick should be to start
@Mytoya2
9 ай бұрын
Hi there, if you're just starting out scrolling you need to start with quarter inch. I usually suggest quarter inch MDF because it's soft. If you have an Instagram or Facebook find me there. I would love to chat with you and help in any way. I can't. On Facebook I am Mytoya Pritchett. On Instagram I am MytoyaNcalifornia
@SawdustmakerLori
2 жыл бұрын
I love how those names turned out. You do beautiful work! What "finish" do you like to use or do you leave them natural? Oh, I wrote a comment on your last video but think I forgot to send it because it didn't show up on the comments. You mentioned coming to the valley to visit your sister and sometimes attending the Pinterest event. I had such fun at that event when I attended a few years ago at West World. I was working a booth but still managed to do some walking around. I hope to meet you sometime!
@Mytoya2
2 жыл бұрын
I usually leave the names natural. Find me on Instagram. My name is MytoyaNcalifornia that way we can keep in touch. I will let you know the next time I'm out that way. 🤗
@SawdustmakerLori
2 жыл бұрын
@@Mytoya2 I'm probably one of the only people left in the world who doesn't have an Instagram or Facebook account. Just don't have the time to spend on social media as I know I'd get hooked on it. :-) Do hope our paths will cross at some point though! Forgot to comment about cutting the butterfly out. Yes, it is definitely better to leave the extra wood on it. Best wishes!
@TheDwilliams1000
18 күн бұрын
How do you design these patterns? I would like to learn.
@Mytoya2
17 күн бұрын
@@TheDwilliams1000 hi there, I used to silhouette Cameo program. I have a couple of videos that show you how to do simple things with the program. The program is free. I repeat free! You do not have to have a cutter in order to use the program. It is really easy to use. If you have any issues after you've downloaded it, please feel free to contact me on any of my social media platforms. Good luck!!
@robsmith3200
21 күн бұрын
Sorry to be a pain but do you also use silhouette to add the graphics i.e. butterfly etc.? If so, do you import that into silhouette?
@Mytoya2
20 күн бұрын
@@robsmith3200 Hi there, no bother at all. Happy to help! I will post a video tomorrow of a name I cut and at the end I will show you how to get the butterfly onto your pattern. 🩷
@robsmith3200
20 күн бұрын
@@Mytoya2 sensational. Apprecited
@Mytoya2
18 күн бұрын
@@robsmith3200 Hi there, I haven't forgotten about you. Look for the video tomorrow afternoon. Sorry for the delay.
@groverearp2600
7 ай бұрын
I have been a wood worker of 7 years , however, scrolling is brand new for me. Where can I get NAME patterns ?
@sjohn-wfuchannel902
8 ай бұрын
is that pin or pinless blade? Also, do you work with pinned blades? I was wondering if we can do the same with pin blades
@bigsparky65
7 ай бұрын
Very nice, how did you do your letters.
@Mytoya2
7 ай бұрын
Hi there, I used a free program named Silhouette to make the pattern. I have a few videos on this KZitem page explaining more about it and how to use it. I then print the pattern off , attach it to my wood and cut.
@davidboston4574
11 ай бұрын
Where do you find patterns/ website for names? Want to do some for Christmas
@Mytoya2
9 ай бұрын
Hi there, So sorry I'm just seeing your post. I make my own patterns using the silhouette program. The program is free. Look up silhouette Cameo program.
@robsmith3200
23 күн бұрын
How do you get your templates for the names? Beautiful work
@Mytoya2
23 күн бұрын
@@robsmith3200 Hi there, I use a program called Silhouette. It is free. It's the program that's usually used with the silhouette Cameo cutter. You do not need a cutter in order to download and use the program though. There's a video on my page where I show how to use the program to make the word or name Sabina.
@robsmith3200
23 күн бұрын
@@Mytoya2 , thank you. Very much appreciated. Rob. Australia
@robsmith3200
21 күн бұрын
@@Mytoya2 Really appreciated. Thank you
@Mytoya2
20 күн бұрын
@@robsmith3200 You're welcome friend! 🤗
@sailingplanetannie1
11 ай бұрын
Love this, but can you tell me why whenever I do a sharp corner, my blade snaps ?
@Mytoya2
11 ай бұрын
Hi there, find me on Instagram so we can talk in person. I need to know a few things before i can try to access the problem. I am MytoyaNcalifornia on instagram. Looking forward to chatting with you.
@eddieporrasduran3932
Жыл бұрын
I like it because the change of blade is quick and simple but I do not know what brand it is?
@Mytoya2
Жыл бұрын
Hi there, I'm using a DeWalt 788 scroll saw. And that is precisely why I chose the DeWalt is because of the quick blade change. Also make sure that you get a foot pedal because then you can make sure that you keep your hands on your piece at all times and your eyes instead of having to move your hand to turn it off.
@eddieporrasduran3932
Жыл бұрын
@@Mytoya2 Thank you very much for your answer. Here in Costa Rica I can't get a Dewalt jigsaw, it's a pity. I'll have to look for some other guy... Thanks again and your work is excellent!
@eddieporrasduran3932
Жыл бұрын
Here in Costa Rica only Craftman, Wen, Makita,
@Mytoya2
Жыл бұрын
@@eddieporrasduran3932 I've never used either of those machines. I'm sorry I can't help with suggestions. Make sure whatever machine you choose uses pinless blades. That way the blade can fit into small holes.
@eddieporrasduran3932
Жыл бұрын
@@Mytoya2 Thanks.
@DavidBoston-rx2yi
13 күн бұрын
Is there a website I can go to and get names for the nameplates??
@Mytoya2
12 күн бұрын
@@DavidBoston-rx2yi yes. Look up silhouette software. It should be somewhere on the silhouette.com site. You want the free version. I'm not sure what version that is now.
@jeffoldham668
11 ай бұрын
that looks great,,,,where did you get the templates
@Mytoya2
11 ай бұрын
Hi there, I made the pattern using the Silhouette program. It's free. I have 2 videos explaining how to make a circle pattern. It's really easy to use. Again, it's a free program.
@tlbmusic
6 ай бұрын
What software do you use to create your designs?
@jamalmason8976
Жыл бұрын
Hello, I’m having trouble with making curves while scroll sawing how long did it take you to get good with staying on the line and making curves. Thanks
@Mytoya2
Жыл бұрын
Hi there, find me on Facebook or Instagram. I want to video chat with you so I can see what you are doing with your hands when scrolling. I am mytoyaNcalifornia in Instagram and Mytoya Pritchett on Facebook.
@Intarsia82
2 жыл бұрын
How do you design your neat patterns?
@Mytoya2
2 жыл бұрын
I use the Silhouette Cameo vinyl cutting program. It's a free download. You don't have to but the machine to use the program.
@0410sunshine
2 жыл бұрын
What font you used?
@Mytoya2
2 жыл бұрын
@@0410sunshine Hi there, my computer is in the shop right now but when it is back home next week I will check to see what font this was.
@Mytoya2
2 жыл бұрын
@@0410sunshine the Font used in this video was Emmett.
@leonarddavis3684
2 жыл бұрын
Hi Mytoya, have you tried the Flying Dutchman Ultra reverse blades? I really like them.
@Mytoya2
2 жыл бұрын
Yes, I have. I still have a few but I love the #5 scroll reverse better. What kind of things do you like cutting?
@Intarsia82
2 жыл бұрын
I find that with 1/3 of the teeth pointing up, there is more sawdust working up to the cutting line. I feel that the scroll reverse blades do a better job of clearing the kerf.
@Mytoya2
2 жыл бұрын
@@Intarsia82 I agree!
@user-yj2ff3po1l
9 ай бұрын
what kind of blade are you using
@Mytoya2
9 ай бұрын
I am using a #5 flying Dutchman scroll reverse. I will be posting a video on blades soon. I buy them from the wooden teddy bear.
@eddieporrasduran3932
Жыл бұрын
hello greetings, what is the name of the saw you use?
@Mytoya2
Жыл бұрын
Hi there, I am using a DeWalt 788.
@MikeyDonna
Жыл бұрын
There is something strange about the wood you are using. Could you identify it please ?
@mytoyapritchett4794
Жыл бұрын
Hi there, The wood I'm using in this video is Pine from home Depot.
@miguelavila1110
2 жыл бұрын
Me encantas tus trabajos que tipo de hoja usas
@pierrefortier1096
Жыл бұрын
what typeface do you use. Thanks
@Mytoya2
Жыл бұрын
In this video I explain everything I am using. Let me know if this helps. 🤗 kzitem.info/news/bejne/xY6Vyqycn4N5fWk
@donnacowell7415
Жыл бұрын
Do you use spiral blades? Have you done a sanding video? If so how do I find it?
@Mytoya2
Жыл бұрын
Hi there, I really don't care for spiral blades. About sanding, I have not done a sanding video because I've never carved a sign before. I look forward to doing one this year though. Sorry I couldn't help.
@donnacowell7415
Жыл бұрын
Thanks for responding. I find spiral blades much easier but you certainly make your technique look easy.
@geocaching63
Жыл бұрын
great work !! what font is that??
@raimundocarlosmagalhaes8598
8 ай бұрын
Queria saber a espessura de madeira.
@ricardojimtor9243
8 ай бұрын
É um pedaço de madeira de pinho de 3/4 de polegada ou 1.905 centímetros.
@jhomer38
Жыл бұрын
my stupid sprial blads won't stay in😭
@garrycarruthers8598
8 ай бұрын
What bran of saw do you use?
@Mytoya2
8 ай бұрын
Hi there🤗, I have a DeWalt 788
@garrycarruthers8598
7 ай бұрын
@@Mytoya2 what program or stencil font do you use for words. Thanks G
@Mytoya2
7 ай бұрын
I have a few videos on this channel that shows you a little about the program I use called Silhouette. It's a free program you can download.
@steveneugene339
Жыл бұрын
What machine are you using?
@BobsWorld379
2 жыл бұрын
I've been looking for the font you're using for several months. What is the name of this font please?
@Mytoya2
2 жыл бұрын
We are on Vacation right now. I will let you know after the 5th of April.
@BobsWorld379
2 жыл бұрын
You replied with a heart but do you know the name of the font?
@BobsWorld379
2 жыл бұрын
@@Mytoya2 wonderful and thanks a million!
@Mytoya2
2 жыл бұрын
Hi there, this is the name of the font in this video. ( Benquiat BK BT ) 🤗
@fume5671
2 жыл бұрын
What scroll saw do you use ?
@Mytoya2
2 жыл бұрын
Hi there, I use a Dewalt 788 scrollsaw.
@roberthossack286
2 жыл бұрын
what thickness wood is that plz? ty rob.
@Mytoya2
2 жыл бұрын
This is 3/4 inch pine.
@roberthossack286
2 жыл бұрын
@@Mytoya2 ty my lovely lady, keep safe.
@Mytoya2
2 жыл бұрын
@@roberthossack286 hi there, I noticed you followed me on Instagram. I accepted your friend request. I also sent you a picture of some of the blades I've used and an explanation.
@roberthossack286
2 жыл бұрын
@@Mytoya2 ty very much.
@mobylette705
7 ай бұрын
Hello cutting saw number ?
@Mytoya2
7 ай бұрын
Hi there this is a #5 flying Dutchman scroll reverse.
@mobylette705
7 ай бұрын
@@Mytoya2 It is very nice for women to engage in art in this way. Thank you. Greetings from Turkey, love.
@regularguy6501
Жыл бұрын
Very very cool. Good job. Nice technique. You don't rush thru it and actually back your blade in for a cleaner look. kzitem.info/news/bejne/yZWO3qdms4arjX4&feature=shares What brand of scroll saw do you use?
Пікірлер: 159