Very helpful video. Through presentation; thank you.
@garymartin598
Жыл бұрын
Great job
@Dadolphinsmakemecry
3 ай бұрын
1st cut TRUE,all the rest minus half inch.
@sportsman042002
3 жыл бұрын
Awesome video man I appreciate it!
@AZSolutions92
2 жыл бұрын
No problem, thanks for watching 👍
@almighty_rza8085
2 жыл бұрын
This a helluva video. Thank U so much Sir
@AZSolutions92
2 жыл бұрын
Thanks for watching, hope this video was informative for you👍
@JB-pw9sp
3 жыл бұрын
Nice job!
@AZSolutions92
3 жыл бұрын
Thank you 👍🏻
@americanbully3952
Жыл бұрын
Thanks
@UtmostAir-hx9fy
3 ай бұрын
Thanks man!
@hsbc05
3 жыл бұрын
Quick question, how long are the staples you would recommend? Also, are the measurements the same for 1" duct board? Thanks! great video.
@AZSolutions92
3 жыл бұрын
I used 1/2” staples by bostitch and they seem to work good for me, and no the measurements are not the same for 1” duct Board. When you buy the amcraft duct cutting tools it gives u instructions for 1”, 1-1/2”,and 2” duct. The 1” duct instructions are down below. Example: 10” x 6” duct 1st cut: 10” + 1-3/8”= 11-3/8” 2nd cut: 6” + 1-3/4”= 7-3/4” 3rd cut: 10” + 1-3/4”= 11-3/4” 4th cut: 6” + 2-1/8”= 8-1/8”
@alfredoguerrero8596
3 жыл бұрын
Great video that was a lot of help thank you
@AZSolutions92
3 жыл бұрын
Yea no problem man, im glad video was helpful 👍
@moiseshinojo5650
2 жыл бұрын
Excellent video....thanks
@AZSolutions92
2 жыл бұрын
Yea no problem man, thanks for watching 👍
@SirHumano97
3 жыл бұрын
Nice job. Thanks for sharing.
@AZSolutions92
3 жыл бұрын
Thank you, and yea man no problem 👍
@SirHumano97
2 жыл бұрын
@@AZSolutions92 I've done 2 duct jobs since watching this video and made some good money. Thanks again!
@jonathansmith7540
Жыл бұрын
Nice job, if you had 1" thick board would the same tools and measurements be used?
@AZSolutions92
Жыл бұрын
Thanks man, and no you will need to buy the 1” duct tools for that, also the measurements are different.
@trangwuong7689
3 жыл бұрын
Thank you very much.
@Joel-nw3vh
3 жыл бұрын
Thank you!! You saved me!
@AZSolutions92
3 жыл бұрын
Your welcome, im glad my video was of help to you👍
@ryanholthouse527
6 ай бұрын
So say for example I want to make a box that’s 17x17 outer dimensions, how do I get my inner dimensions based off that for 1.5 duct board
@AZSolutions92
6 ай бұрын
Just subtract 3” from both your outside dimensions, so (17x17 outside dimension) should be (14x14 inside dimension)
@ryanholthouse527
6 ай бұрын
@@AZSolutions92 ok sweet thanks man
@hugoe1991
Ай бұрын
That set of tools does it come in a box? Like that if yes link please
@AZSolutions92
29 күн бұрын
No the tools have to be purchased separately from the box, then you have to assemble it yourself.
@victorochoa779
2 жыл бұрын
Question for you how would you cut for a 1ft x 10 ft 1ft all the way around
@e420savior6
3 жыл бұрын
Can you do inch board too man iv gotten so many formulas over the years for 1nch and 1 n1/2 , I just need 1 dominant formula
@HowToDoitright
Жыл бұрын
Can we put mastic inside at the corner for a better seal?
@AZSolutions92
Жыл бұрын
Yes you can 👍
@HowToDoitright
Жыл бұрын
@@AZSolutions92 but I heard it eventually catches mold?
@JuanGonzalez-dc6gk
Жыл бұрын
Really awesome instructional video. Thank you Alex. I am trying to find the best place to buy duct board so I can redo some a section. Any recommendations? I live in Tampa, Florida. I found the following at Grainger from JOHNS MANVILLE. Thoughts?
@AZSolutions92
Жыл бұрын
Srry for replying so late, but yes the johns manville duct board is perfect.
@mattv2492
3 жыл бұрын
Ty man keep it up
@AZSolutions92
3 жыл бұрын
Yea no problem man👍
@bilalsyed2603
2 жыл бұрын
I have 10 years experience in duct board pebrication
@joshuadejesus537
2 жыл бұрын
Hey Alex where did you get that case?! It looks great! I want to buy or make one. Let me know please!
@AZSolutions92
2 жыл бұрын
I bought it from amazon, it’s currently unavailable at this time but i provided the link down below maybe u can find something similar. SRA Cases Aluminum Hard Case with Foam Insert, Black, 18.1 x 13 x 6 Inches www.amazon.com/dp/B00NPYDF8W/ref=cm_sw_r_cp_api_glt_fabc_FJ19M9W7DQYQRBJKJA2Z
@joshuadejesus537
2 жыл бұрын
Thanks brother! great content keep them coming!
@albertdenismenard1320
Жыл бұрын
Do you have measurements for one in board thanks.
@AZSolutions92
Жыл бұрын
Yes for the 1” Duct Board the First cut is (ID + 1-3/8”) Second cut is (ID + 1-3/4”) Third cut (ID + 1-3/4”) Fourth cut (ID + 2-1/8”) Make sure you have 1” v-groove tools to perform the cuts.
@mrrjtrevino
Жыл бұрын
Is that 2 inch duct board or 1 1/2
@AZSolutions92
Жыл бұрын
1-1/2 duct board
@AngelFlores-jx1pf
2 жыл бұрын
How do I size the ductwork to a air handler? For example a air handler is 20x20 do I use those to do the cuts or do I have to subtract or add something ?
@AZSolutions92
2 жыл бұрын
20x20 is going to be ur outside dimension, so u need to use the inside dimensions to make ur cuts. If the duct board is 1.5” thick then u need to subtract 3” from each outside dimension to get a inside dimension of 17x17.
@AngelFlores-jx1pf
2 жыл бұрын
@@AZSolutions92 so it’ll be 17+2 17+2 5/8 17 + 2 5/8 17+2 3/4
@AZSolutions92
2 жыл бұрын
@@AngelFlores-jx1pf Yes that is correct 👍
@AngelFlores-jx1pf
2 жыл бұрын
@@AZSolutions92 what about for pre existing duct, do I get the outside dimension of it and do the same ?
@AZSolutions92
2 жыл бұрын
Yes if the duct is 1.5” then get ur outside dimension and subtract 3” off each side Example: pre existing duct measures 17”x21”out side dimension, if its 1.5” duct then subtract 3” from each side u will get 14”x18” inside dimension this would be ur cutting dimensions that u plug into the cutting formula
@mrrjtrevino
Жыл бұрын
So how do I get dimensions for plenum to sit flush with unit
@AZSolutions92
Жыл бұрын
Just measure outside dimension of unit and subtract 3” to get ur inside dimensions (Example: unit measurement 21x21 then subtract 3” from each dimension which will give you 18x18) hope that answers your question
@mrrjtrevino
Жыл бұрын
Yes sir youu the man
@njaimerod
2 жыл бұрын
What type of staples are you using?
@AZSolutions92
2 жыл бұрын
This is a link to the staples used in video BOSTITCH Crown Staples, Heavy-Duty, 1/2-Inch x 7/16-Inch, 1000-Pack (STCR50191/2-1M) www.amazon.com/dp/B000GAQCP6/ref=cm_sw_r_cp_apip_zSwCvu6k4wpTA
@thestylesworld
3 жыл бұрын
Is it Knauf rigid fiberglass?
@AZSolutions92
3 жыл бұрын
No I used (Johns Manville Mat-Faced Micro-Aire® 120 x 1-1/2 in. Duct Board) but I believe knauf rigid fiberglass is similar jus make sure its for air conditioning application
@thestylesworld
3 жыл бұрын
@@AZSolutions92 I want to use it to make acoustic panel. I requires minimum 2 inches thickness.
@AZSolutions92
3 жыл бұрын
Here is a link were u can find up to 2 inch thick duct board and info of product, says it has good acoustic characteristics. www.budgetheating.com/Duct-board-4-foot-X-10-foot-sheet-R4-R6-R8-p/148008.htm?gclid=CjwKCAiAu8SABhAxEiwAsodSZKvL9OFQtGckZ9yikEiM4wyy2ik_GH_mCCWJiO1eMZw8zbNKSRQvPRoC9AMQAvD_BwE
@heres1-two-cents
2 жыл бұрын
No green handle knife
@joejoe6949
Жыл бұрын
How are you not wearing gloves?
@AZSolutions92
Жыл бұрын
I don’t like wearing gloves, I’m just used to not wearing them, but it is good practice to use them
Пікірлер: 69