I am sixty-six years old, and it makes me so happy to see a young man apply himself to something he loves. I am really enjoying your videos, and I wish you the very best. GOD bless you.
@stevenholton438
4 жыл бұрын
You made my eyes water Sir!
@tomduncan1970
4 жыл бұрын
I'm 49 and completely agree with you John! I couldn't have said it better myself.
@FastJapaneseCars
4 жыл бұрын
I'm also 49 and totally agree with you John. His creativity, enthusiasm and passion is an inspiration to us all.
@asiimweahmedkassim8254
4 жыл бұрын
Cool you make it possible.
@fredchase9945
4 жыл бұрын
I am 81 yr old and he makes me feel young again I just admire this young man , he is a a very clever technician. Keep those ideas coming on this build.
@Edogawa1117
4 жыл бұрын
"This car is really coming together," as he sits on an upturned bucket in a car with no floor,lol.Love this channel.
@gezzuzzful
4 жыл бұрын
Does not stop rob dahm
@muskokamike127
4 жыл бұрын
I had to laugh at the irony of saying "it's coming together" after he cuts it apart....that was comedic genius right there hahahah
@davepelfrey3958
4 жыл бұрын
I can't help but laugh too every time he says that. I have to say this about him, he does have a vision.
@Edogawa1117
4 жыл бұрын
Dave Pelfrey He has an immense vision.Nothing peturbs him.
@muskokamike127
4 жыл бұрын
@@davepelfrey3958 I had visions too, and then they went away when I stopped doing LSD hahahahahha
@crsmith56
4 жыл бұрын
You are taking this side of youtube to a whole new level. I am impressed and anxious to watch the whole way. Great work.
@elliottslab
4 жыл бұрын
I will be impressed when he puts it back together 😂
@maleficentcop2752
4 жыл бұрын
@@elliottslab Hell I'm impressed now...I would have chickened out by now....😬😜👍
@elliottslab
4 жыл бұрын
Tim Benedict haha at least he didn’t cut a fast back in half 😂
@maleficentcop2752
4 жыл бұрын
@@elliottslab Not yet you mean... It's still early in the build... hehehe haha..🤔😜🤣😂
@elliottslab
4 жыл бұрын
Tim Benedict I must admit I was scared just cutting out the radiator panel and drilling out all the spots in my mk1 ford Capri to fit a v8 in there 😂
@euroker05
4 жыл бұрын
Favorite quote from vtuned: "It shouldn't be too hard." 🤣👍🏽
@Mad4Motors_
4 жыл бұрын
Parts are too wide, everybody: i give up. Vtuned : let’s cut and widen the car...awesome
@muskokamike127
4 жыл бұрын
No, Ken Block did his hoonicorn without widening the body and it looks freaking incredible. He did the same with the Hoonitruck. Think back to the DTM mercedes race cars...they installed really wide flares etc but in a tasteful way that it makes the normal sedan look badass.
@marklivarchuk5969
4 жыл бұрын
Muskoka Mike he has flares this will retain somewhat of a stock body
@marklivarchuk5969
4 жыл бұрын
Muskoka Mike and retain a 2015 track
@muskokamike127
4 жыл бұрын
@@marklivarchuk5969 same as Ken Block's...... I think the main issue is he wanted to use the stock 2015 dashboard. A lot of work for that. He's even said he's going to go different wheels so if it's only 3" wider, that 1.5" on eithe rside could have easily been made up with flares. I've seen other builds where they've widened a 60's ear mustang and it just looks weird. I hope his doesn't.
@FLYRIGHTER
4 жыл бұрын
Ummm, glass? Sectioning hood, trunk, bumpers, tail panel, cowl, ... not to mention the proportions. Oh well. Good luck.
@NSX.R
4 жыл бұрын
*wide-body* /ˈwʌɪdbɒdi/ _noun_ noun: *widebody* 1. Everybody: Liberty Walk / Rocket Bunny 2. vTuned: widen the body literally
@DavidJones-hl5om
4 жыл бұрын
Really like this project vtuned you're leaving your friends in the dust doing a one-off is the way to go
@the_blue_gamer
4 жыл бұрын
I seriously can't wait to see this car when it's done. It's gonna look sick
@matt2m
4 жыл бұрын
I am so blown away there’s like nothing left of this car it’s just a general guideline at this point for a shape you want
@muskokamike127
4 жыл бұрын
yeah I know, with the addition of the fastback conversion there's not much left of the original vehicle. I said from the beginning I don't know how much he paid for the salvage car, but he could have bought a fast back shell prob for the same price or less.
@alisterrebello5337
4 жыл бұрын
At Sema 2020: This year's hottest build is a converted widebody 1966 mustang with a 5.0 motor from a 2015 GT and it's from none other than VTuned 🔥
@NotMyAccount
4 жыл бұрын
Mustang: Every new video is getting chopped more and more vTuned: its starting to come together really nice Me: w-wut?!?
@JakeGreen86
4 жыл бұрын
Its his vison he can se coming together I am just like that is a mountain of work.
@jakel3424
4 жыл бұрын
That's a custom wide body for sure
@regressmenot
4 жыл бұрын
Ye have little foresight.
@chrisf7731
4 жыл бұрын
i said the same thing lmao
@cpad007
4 жыл бұрын
@@regressmenot foreskin
@redbear4498
4 жыл бұрын
I like how he cuts the car in two. Then right after that he says it’s coming together nicely. Lol
@christophervienneau8125
4 жыл бұрын
Lmao
@SamYoungRadio
3 жыл бұрын
Split her in half and you'll come together nicely. lmao
@chadruple8039
4 жыл бұрын
This is turning out to be my favorite most anticipated build yet.
@sling3lade791
4 жыл бұрын
Same here. ... Giving the goonsquads 3500 conversion a run for its money lmao . Seriously though love both channels
@benjaminvdvyt
4 жыл бұрын
Cuts a stripped car through the middle. "This thing is coming together"
@ja6443
4 жыл бұрын
My man VTUNED is no joke! Serious respect ✊🏼 for serious skills! Come on people SUB this guy into the millions!!! Cheers 🍻
@DjDestinyChicago
4 жыл бұрын
This is turning into my favorite build on KZitem!! I can’t wait for the next update
@drhoex
4 жыл бұрын
vTuned makes cutting cars look easy 😂
@andrewdrummond7351
4 жыл бұрын
Cutting cars is easy. Its putting them back together thats hard.
@liveandletlive2894
4 жыл бұрын
Just cut my civic in half today Trying to turn it into a trailer
@ChuckBeefOG
4 жыл бұрын
live and let live lol what kinda trailer are making
@liveandletlive2894
4 жыл бұрын
@@ChuckBeefOG to haul my ATV's dirt bikes and maybe motorcycle too...stock '00 4 door civic cut from the dash up...now I need to figure out how to strengthen the front end to mount a hitch (and I cant weld so would need to pay someone) and I'm 20 and broke so...
@ChuckBeefOG
4 жыл бұрын
live and let live Welding is pretty easy but you need the welder. I started on a massive arc welder. Good luck with your build.
@RCBednei
4 жыл бұрын
Tekton make great quality affordable tools!!Thank you Tekon for Supporting vTuned!!!
@MCkevin702
4 жыл бұрын
omg every day i I'm looking forward to the new video, this project is such a interesting
@tnakhla0
4 жыл бұрын
Guy - there’s no one like you. You’re so young but you know so much. It’s so admirable. You’re drive and ethic is just perfect. Keep up the great work. I can’t wait to see the mustang finished!
@joe6132
4 жыл бұрын
I'M GOING TO CUT MY 2011 F350 IN HALF AND MAKE IT A WIDE BODY!
@kevincrenshaw9588
4 жыл бұрын
make it one of them good ol 6 door fords! fuck it, this is america. make it an 8-12 door F350, put 3 beds together one red, white, and blue.. and put a second engine in the back.
@iknklst
4 жыл бұрын
Get a skinnier gf, save yourself a fortune in mods.
@mattivirta
4 жыл бұрын
totally idiot all idea
@TheSuburbanGardener
4 жыл бұрын
When he said, "this thing is really coming together", I said outloud " it's coming apart!"
@glitchworks5957
4 жыл бұрын
I was sent over on a recommendation after watching B is for Build starting his own Mustang build. Two totally different approaches to end up in a similar style when they are done.
@Dmanpeterson
4 жыл бұрын
devestatorx yea I’m curious to see who’s will look better. I’m fairly certain Vtuned will bang his out much faster than Chris if he keeps this pace
@liveandletlive2894
4 жыл бұрын
VTUNED is the far more skilled competitor
@thereissomecoolstuff
4 жыл бұрын
V-tuned is more experienced for sure. I don't know how "B" is going to do. He has on strike, he has to work around antifa..
@thereissomecoolstuff
4 жыл бұрын
@Conor B is for build is in Portland OR. Home to regular meetings of young people wearing black clothes and masks that beat the crap out of people they don't like. No antifa in V-tune land.
@DarkRider2k3
4 жыл бұрын
I'm curious how Chris will do his. Hes got Oscar the legend to help him with fabrication. Hope both of these are at sema
@danielmarshall4888
4 жыл бұрын
I'll add my enthusiastic comments and support! Love watching his casual confidence AND massive skills, not to mention impressive creativity...all while wearing hoodie and trainers and no gloves. Serious wow!
@not_uzi9590
4 жыл бұрын
Who was here before Vtuned was comfortable being on camera
@charlenedrian7133
4 жыл бұрын
I was here when he just started lol
@paddyian
4 жыл бұрын
And his video quality has gone way up to. He's really coming around for sure.
@empire0731
4 жыл бұрын
still very uncomfortable on camera lol Looks like a robot
@HI-vv2nm
4 жыл бұрын
I’d rather watch someone like a robot than some of the others that are hypo they get fuckin annoying after a wile v tuned the best by far.
@boytechnichian
4 жыл бұрын
He still isn't? 😂😂
@Andy-pt1vx
4 жыл бұрын
I like how you state what you are going to do and then you do it immediately. No over kill on talking. Appreciate that.
@scott21ny
4 жыл бұрын
Bro this is one of the sickest builds going on KZitem! so pumped to watch this come together!!!!!
@420murdaface
4 жыл бұрын
Your level of thinking and getting things to fit on the mustang is ridiculously fantastic I love seeing this build and can't wait till you get this baby done VTuned you are a true fabricator, Mechanic, welder, everything and above 👍
@billnalder1017
4 жыл бұрын
Me- "a guy can never have enough screwdrivers" Vtuned- "Yes"
@Watchyn_Yarwood
4 жыл бұрын
NEVER! There is no such thing as "enough screwdrivers"!
@derrekg8338
4 жыл бұрын
Man, I love this! No eBay junk and no relying on shitty overpriced bolt-on kits to hide a lack of skill and creativity. It's either OEM or it's fabbed from scratch. That's real car building, kids. Soak it up, because it's rare as hell on KZitem.
@floodx4947
4 жыл бұрын
"Lets remove the windshield so we don't cut ourselves" .. Leaves jagged glass all the way around the windshield frame. :-?
@rchavez5056
4 жыл бұрын
Lol, and uses rubber gloves to remove the window.
@maleficentcop2752
4 жыл бұрын
Hey no blood no foul 😂😜👍
@rchavez5056
4 жыл бұрын
@@maleficentcop2752 True
@ChuckBeefOG
4 жыл бұрын
It was more to help with the dash removal but its good to promote safety for the young folks watching.
@hjnhynjnhslyjnkhjngnjnslyr7330
4 жыл бұрын
It was a trap to fool us but aint worked for all
@asiboy2912
4 жыл бұрын
Hit Like if you LOVE vTuned and Goonzquad!!!👌🔥😎
@georgikukov5129
4 жыл бұрын
Called it years ago : This kid is something else! Good luck with this ambitious project! Fixing beant cars on the frame machine with your skills is indeed impressive, but fabricating an iconic car is a whole other ball game :) If any one can pull it out it should be you! Looking forward to the rest of the series :)
@keepout7439
4 жыл бұрын
V tuned is the man, Goonzquad always went to him for help when they started, he should and deserves to have a larger number of subs. He does some off the chain fabricating work, love his channel 💯💯💯, I'm a OG with his channel 💯😀, Awesome work brother on everything 💯
@mitchsmith3814
4 жыл бұрын
Goonzquad gives him much love though. What they do is an art. I go to the same coparts in Atlanta they do and pick up cars, but not got the same budget
@staytruetv3896
4 жыл бұрын
I love both the channels, they inspired me to start having a go at content myself.... I think it is how goonzquad sell their channel that is the diffrence.. Both channels great content, and awsome builds.. do love the imagination in vtuned builds 👍👌
@1983jonwitt
4 жыл бұрын
They actually gonna do it,this will be the best 2020 rebuild,so many new subscribers will blow him up,keep up the work!!!!
@dloadthis1617
4 жыл бұрын
I LOVE THIS CHANNEL! You're an inspiration to all of your KZitem fans! God bless you! 👍😎👍
@empire0731
4 жыл бұрын
Great skills and content
@masmotorsports
4 жыл бұрын
Everyone: This car burnt to the ground and has lots of rust, lets auction it. vTuned: hold my sand paper, i got this "whips out a plasma cutter" 🔥
@keithg145
4 жыл бұрын
Definitely my favourite build to date, this Is the type of content I wanna see, keep it up dude! Watching all the way from Dublin Ireland
@rolfjager3519
4 жыл бұрын
This Car is a " Keeper" when its finished💪💪
@briangerring1095
4 жыл бұрын
V Tuned you are one cleaver cookie , for a guy so young you are so experienced with how and why to do stuff , lows B for build any day, and goon squad , unless it just need a new panel and a bit of paint and maybe a bit of a tap here n there, you way out of their league , can’t wait to see how it all goes , simply awesome!!!
@nikond90
4 жыл бұрын
I placed my Tekton tool order, looking forward to giving them a try.
@rickcar94
4 жыл бұрын
Notification squad in the house! It was painful to see you cut that thing in half, but I know it's gonna pay off in the end. Keep up the good work bro! 🙌
@oldschoolhoosier
4 жыл бұрын
Gota say..Your approach to widening the car is spot on. I widened as well as lowered a 66 mustang back in the 70’s and increased the performance and weight by 60%. You might consider chrome moley 4130 seamless for strength and weight reduction.
@theaveragesimmer4780
4 жыл бұрын
I love Goonzquad been teaching you some KZitem editing tips. Your channel has every chance in the world to grow like theirs did
@davidb0126a
4 жыл бұрын
Very impressive! You have a vision for this car - you actually see it in your head. That's why it's so simple for you to do the work. VERY impressive.
@mead6754
4 жыл бұрын
what a great life your leading, love this build
@disciple8857
4 жыл бұрын
Nothing is impossible for V tuned. This guy is an artist. Really a tremendous talent for one off builds. I can't wait for the final reveal.
@shawn2296
4 жыл бұрын
that is just insane you’re doing what ive wanted to see in years
@peterkeenan8938
4 жыл бұрын
I'm just so impressed with the ambition of this project! It's going to be fantastic when it's finished. Best wishes from the UK.
@Dany-oj2jv
4 жыл бұрын
your a very smart kid... love your video!! ;-) "LIKE"
@cuteworld2937
4 жыл бұрын
Yeah
@Voltrondefenderoftheuniverse
4 жыл бұрын
Hells yeah vtuned !!! I’m so hype on this build . Also shout to your helper (for giving the extra helping hand ) .and shout out to your camera man 👍🏻
@joeyferrer209
4 жыл бұрын
Love the idea of updating the car with the newer interior! I do hope however that you upgrade to the digital dash 👍🏼
@27eyes
4 жыл бұрын
My idea exactly.
@matthewfischer6232
4 жыл бұрын
I think he mentioned in one of his videos that he wants to do a digital dash, so I’m excited to see that
@27eyes
4 жыл бұрын
Matthew Fischer Oh bet that sounds dope as fuck!
@AndreGuerrieri
4 жыл бұрын
Judging by the comments, it seems like this build has brought in an influx of me viewers. All I can say is sit back, relax and enjoy watching one of the best of not the best body guys on KZitem. vTuned is a beast...a very talented beast.
@27eyes
4 жыл бұрын
Literally my dream project! I’d love to have the modern mustang interior in an old mustang body. A digital gauge cluster in a 69’.. 😍
@TrailTrackers
4 жыл бұрын
Now this is a build I can get into. Reminds me of almost 40 years ago when I had a 1970 Camaro (the car was only 10 years old). I wanted T-Tops, but all the after market kits sucked donkey and leaked. So I found a guy in the classifieds parting out a 1978 TransAm with factory T-Tops; roofs are interchangeable. He didn't think I was serious when I told him I wanted to buy his roof including both factory, glass T-Tops. Got my uncle and we went over to his apartment complex and cut the top off that night. A couple weeks later I had the only '70 Camaro in town (probably in the whole state actually) that had factory T-Tops; and they didn't leak. Can't wait to see him driving this car. Kids got ambition for sure.
@bluegreenish3394
4 жыл бұрын
this will go at SEMA I'M TELLING YOU
@Heavyhitta509
4 жыл бұрын
Idk this project is going to take time. Idk about this year this serious project hopefully but I doubt he wants to rush it. But hes talented hopefully he can get some other youtubers like his buddies at goonsqaud to help him. Cut some man hrs off. He so good he makes it look easy but all this takes allot time especially once he starts doing all the metal work
@murry001
4 жыл бұрын
@@Heavyhitta509 i'm glad he doesn't rush the build like other youtubers, *cough, b is for build*
@Hbzprojects
4 жыл бұрын
When you first started this project i was stoked on it, (I'm not even into fords at all) and i was kind of bummed because I didn't wanna be waiting 6+ months to see an at least close to finished product, but you've been absolutely knocking this thing out, I've enjoyed every episode.
@LesVertsAlgerie
4 жыл бұрын
Serious respect
@nordinmanhaeghe7193
4 жыл бұрын
I'm a woodworker and watch a lot of woodworking channels but after i found this channel i find it the most entertaining content to watch, keep uploading vtuned, you are doing great work with this channel! Greetings from belgium
@michaelmaas3194
4 жыл бұрын
This is unlike any build I’ve seen, you’re literally making a car from scratch.. keep up the good work man👍🏼💪🏼
@57Banjoman
4 жыл бұрын
I must admit that I am an old guy that would have liked to see the Mustang back on the road with a 289, but I am very impressed with the skills of these young men-I am looking forward to seeing the progress of this project!
@TheMasterizzatore
4 жыл бұрын
Me repairing 1 inch of rust on my old grandma's car: I'M GOD vTuned: Old my plasma cutter
@raymondtuckerjr1886
4 жыл бұрын
What a vision and a hell of a lot of work. I'll be watching this build all the way through. Ambition+skill+youth+work=vtuned!
@brianmarceaux1807
4 жыл бұрын
It’s been my life long dream to cut a mustang in half........(all fords really)
@walkingtalkingmonkey4103
4 жыл бұрын
Are you saying you hate fords?
@daviddonaghy7568
4 жыл бұрын
Brian Marceaux You must be a Chevy guy.
@brianmarceaux1807
4 жыл бұрын
hoes madd of course not, I don’t “hate” Fords. I don’t hate anything. (Except maybe pumpkin spice) At least Fords are American made (sometimes). I just take more enjoyment in seeing them cut in half than I would say a Chevelle or a corvette.....
@walkingtalkingmonkey4103
4 жыл бұрын
@@brianmarceaux1807 i feel ya, chevelles are less common than these old mustangs
@maleficentcop2752
4 жыл бұрын
So... It sounds like your talking cross wise... Not leangth wise .... I feel you buddy...👍👍👍
@bernardpeters1856
4 жыл бұрын
I love how you really get shit done in every video - its pretty friggin amazing to watch you tackle this highly ambitious project - Keep up the great work!
@mennoboon8037
4 жыл бұрын
Did you do a build project like this before, or is it just expierence from the "smaller" jobs?
@treyfaulkner2315
4 жыл бұрын
by far one of the coolest builds on youtube. hes doing stuff nobody has ever done before on here. so awesome
@gilmello8296
4 жыл бұрын
When you have finished I hope you do a recap of the number of hour’s invested in the project.
@stacyernst9604
4 жыл бұрын
That would be interesting!
@williamking200
4 жыл бұрын
Vtune: Takes a huge breath, turns on camera, commences to talk and work at 100 MPH! Gotta luv this guy
@SkinnyPedalMotorsports
4 жыл бұрын
The editing/videoing is growing with this build 🤘🏼
@jasonw3303
4 жыл бұрын
Skinny Pedal Motorsports agreed
@kenrossaukrsa
4 жыл бұрын
What a build ! So excited to watch the progress in each step of the way . For the curtain and seatbelt airbag sensors , use 4.7 mf resistors across the plugs connections to maybe delete the airbag light, I remember itsjustasix didn’t connect A plug near the radio and temp control area and his car wouldn’t start , think it was the cigarette lighter
@Metalhead30311
4 жыл бұрын
vTuned: Cuts Mustang in half. Phil Swift: *busts through wall* And I'll repair it with only flex tape!
@cuteworld2937
4 жыл бұрын
Hahahahaha
@murry001
4 жыл бұрын
@@cuteworld2937 lol would be great if VTuned did a parody and made a video repairing the car with just flex tape hahaha
@RESTORATIONRESCUE
4 жыл бұрын
Probably the most underrated Car KZitem channel there is. Vtuned's skill is so much better than 99 percent of people. If I wrecked my car, I would go to him.
@Deathignator
4 жыл бұрын
The man, the myth, the legend, Vtuned!!!!
@steverogers1976
4 жыл бұрын
Tekton!! Takin' care of our boy VT! 👍👍
@Razwer
4 жыл бұрын
I'm loving this project! I'm very curious how the windshield and rear window will be done now the car is a non standard size.
@davebuck3944
4 жыл бұрын
Custom sized glass.
@davidparker3522
4 жыл бұрын
He said he was going add an inch and half to each side of the A piller. That way he can use the stock windshield. I'm guessing he'll do the same for rear.
@alshotrodsandratrods8780
4 жыл бұрын
Justin Bieber should have cut out the windshield and back glass frames before cutting the body like professionals do. Now he'll have to cut the two halves and weld them back together. One section of the windshield frame he destroyed with a sledgehammer so he'll have to find a piece to fill it in. He can't afford custom sized glass. They only do that for million dollar cars. It costs thousands to make each form. He'll learn a lot from this experience. Maybe do it right next time.
@alshotrodsandratrods8780
4 жыл бұрын
@@clintonepps3666 Bless your heart. You would have to reckon a windshield from a wider car but it would be more work to use anything but the original one. Even if he didn't cut it in half and used the original he would need some metal filling on the bottom where he used a sledgehammer to remove the cowl and dashboard. He said he would widen the a pillar to use the original. I must have missed where he said he would use the back of the 2015 body. I mute when he uses that terrible music.
@alshotrodsandratrods8780
4 жыл бұрын
@@clintonepps3666 I checked out your channel and I see that your hobby is jumping toy cars. If you check mine you'll see a lot of cars I built. When I say the 89 windshield won't fit it's because I have 40 years of experience. I have chopped tops and even sectioned a 49 Ford but I would never cut one down the middle. I did have a friend who widened a 39 Dodge truck cab to fit a late model Truck frame. He kept the stock size rear window. The windshield was flat glass so it was easy to get new glass cut to fit. He had something Vtune doesn't have. A plan and a tape measure.
@larannar123
4 жыл бұрын
Wow, I've been watching all your videos and am just blown away by this build! Can't wait to see you finish this,truly amazing brother!😁😁
@leebenstead7171
4 жыл бұрын
It's a shame Tekton didn't send you trim removers :-(
@scottblackwell5789
4 жыл бұрын
I'm on pins & needles on this build. What a way to take these car rebuilds to the next level. I hope your subs soar during this build.
@Saiyan21
4 жыл бұрын
perfect timing. Was starting to get bored trying to find something to watch.
@DJDinaggio
4 жыл бұрын
VTuned is a very talented young man and I love his enthusiasm. Not only skilled in bodywork but in fabrication too. This is no chop shop job; this is serious stuff and I'll be following this build to the end. Keep up the great work. 👍
@paulog8813
4 жыл бұрын
“Now we’re going to take this door out”. I was expecting a show of sparks but instead Vtune grabs the ratchet instead of the grinder! ☹️☹️☹️. 🤣🤣🤣
@iskandardzulkarnain1187
4 жыл бұрын
Paulo G i was expecting the same thing lol😂😂😂
@bw227
4 жыл бұрын
Finally someone else is fabbing a project from basically junk. Gotta love it.
@argatar
4 жыл бұрын
Whos here from that mustang resto mod in our reccomended
@ДомМолитвыДомМолитвы
4 жыл бұрын
kzitem.info/news/bejne/yoSgvZaogaKff3o
@zakariyaali4485
4 жыл бұрын
Me
@ДомМолитвыДомМолитвы
4 жыл бұрын
@@zakariyaali4485 yes. 😍😍
@ToyManFlyer1100
4 жыл бұрын
Just shows it can be done....Sooo , dont doubt him....
@its_oc10_
4 жыл бұрын
The man has a vision in his head and he’s making it happen. He’s cutting it more and more so I’m not sure how this will turn out but he’s set on making it happen. Good job Man. Excited to see the final product.
@DemoninyourDream
4 жыл бұрын
Bro don’t use your legs as a work bench for grinding and drilling lmao
@FarceurFarceur
4 жыл бұрын
I did wince when he was drilling the holes in the cross pipes. Bit close to the man tackle that was.
@92xl
4 жыл бұрын
vtuned: Watch as I give myself a Prince Albert, it shouldnt be too hard.
@andersblixt8994
4 жыл бұрын
vTuned is a nother level! Custom car in less then 15 videos and 3 months! Other KZitemrs do paint and brakechange in 8 months!🔥🔥🔥 Great work!
@mikerobles5454
4 жыл бұрын
I love this channel, ma man, My respect! You are a pro!!!!
@jasmith1867
4 жыл бұрын
This is the first project like this that I got in on the first day. A lot more interesting than watching one that's years old. I'm enjoying the speed that it is moving along.
@donanders2110
4 жыл бұрын
Young man, make this thing awesome, and shut up the doubters!
@MrBodyman5001
4 жыл бұрын
Good luck. It is going to weigh 4500lbs not counting the plastic filler. So 5000.
@socalluis2177
4 жыл бұрын
VTuned going all Chip Foose on us! Love it. Most underrated car channel on KZitem. Craving updates like an addict.
@midlanticfishing5405
4 жыл бұрын
He has to stop doing this to occasionally help Samcrac, what a shame! 😉
@SDMF5000
4 жыл бұрын
Samcrac has a new Man-crush and Bromance going with Alex from LegitStreetCars.
@paulog8813
4 жыл бұрын
You don’t help Samcrac. You do all the work for Samcrac. The man has no working skills. But he has good ideas and is funny.
@pathumsameera1788
4 жыл бұрын
this guy knows the game. since everyone doing these rebuilds they really dont earn much as a original ever will but check this guy out.he is making ever loved cars powerful. these gonna sell way higher than even an original mustang . good luck I love the way you think .A man in making
@pheasantpluckersson2138
4 жыл бұрын
My only question is this..V Tuned do you have someone making you custom front and rear screens and window rubbers? Because if they ain’t, you’re screwed 😂👍🏻
@MonsterSound.Bradley
4 жыл бұрын
He already talked about it. Add 1½"" to the pillars where he is putting a roll cage anyway.
@craigwilson8420
4 жыл бұрын
Did you actually watch the video?
@aaronf4201
4 жыл бұрын
Conor any modern a pillar would be that wide. Visibility will be fine and it will give it more strength.
@gusser2121
4 жыл бұрын
Every time I check out the current episode on this build, I keep on getting crazier waiting for the next one to come out. This is a FANTASTIC project!
@travislayson2384
4 жыл бұрын
14:17 I love the look you gave the camera when you said “and everything is going to be perfect.” It looked like you were trying really hard to believe yourself! Lol I think it’s going to be a great car and it’s awesome to see how you’re doing it. Every time I think “ how in the heck are you going to keep it straight?”, you have the answer! Awesome
@PhalanxFire
4 жыл бұрын
Amazing vision to see what needs to be done to make it come together. I'm really interested to see this happen. Keep up the great content.
@mikeellard3361
4 жыл бұрын
Before you weld the roof glue a 50mm strip of 1,2 steel from front to back about 50mm each side of join this will stop roof from buckling and keep it straight,, add more roof supports and maybe add a wider new half roof so as to only have one join, and under lap step join .this worked when I was building limos.I hope this helps ,Regards Mike,
@garyp2215
4 жыл бұрын
Extraordinary content and you actually fabricate instead of bolting on new panels and aftermarket items. Excellent.
Пікірлер: 1,5 М.