The Deere 329E is in the shop so I grabbed the Kubota with the MTL XC5 brush cutter and went back over to the 8 acre lot to clear out the ditches. #MTL #XC5 #Kubota
Scary stuff man glad you got it out. Really liking that mower on the excavator. Nice work as always
@idigit4967
3 жыл бұрын
Yeah I got very lucky no doubt! Something to keep a better eye on in the future for sure. The mower on the mini has been awesome though. That little thing is a beast. I've really enjoyed running it and seeing what it can do. Thanks for watching!
@alanclark249
3 жыл бұрын
Great video I bet it took a good part of the day doing the grass cutting with the smaller cutting head
@williambell868
3 жыл бұрын
I work at JRE in NC and have worked a couple of those loader set ups with the lines in the loader arms. Easy to work on and service with most issues able to be corrected on the face of the adapter plate.
@idigit4967
3 жыл бұрын
Sweet, good to know! When I upgrade I am definitely looking at a 333G Deere. Any good and/or bad things to know about that particular machine? Would love to get some feedback! Thanks!
@williambell868
3 жыл бұрын
@@idigit4967 The biggest thing I have seen is grease and lack of general maintenance. We have one as our shop mule and it takes everything you can throw at it plus some. Very stable machine and not lacking on power. If you get the remote quick coupler just make sure you keep the area around the motor clean and guard the harness going to it.
@JeremiahHassan-r5x
2 күн бұрын
which do you prefer for the excavator, the brush cutter or the little mulcher head? I am on the fence as what to buy.
@Something2LookAt
3 жыл бұрын
Good stuff man. Looks like the camera got nailed a couple times near the end.
@idigit4967
3 жыл бұрын
Yeah it did LOL, I need to give him hazard pay! 🤣 Thanks for watching!
@jameswhite6060
2 жыл бұрын
Why does the machine make a noise when moving tracks and arm with mower deck but does not with mulcher?
@stevemclaughlin3043
3 жыл бұрын
That's some rough turf ! Good job on it though! :)
@idigit4967
3 жыл бұрын
Thanks 👍
@brentking-gmailking2570
3 жыл бұрын
Great job. It is looking much better.
@idigit4967
3 жыл бұрын
Thank you! Cheers!
@forky-reviews-and-rants
3 жыл бұрын
Really glad it was just a wire burned I would have hated you to be telling us its something more serious when its a major piece of machinery giving you a living...Glad it all worked out and hope it does not hurt your wallet...Great video....Stay Safe
@idigit4967
3 жыл бұрын
Thanks! Hopefully the guys at Deere can get it fixed quick!
@tomharrington1393
3 жыл бұрын
👍excellent 👍
@idigit4967
3 жыл бұрын
Thank you 👍
@brianscofield2457
3 жыл бұрын
Amazing machiene.. Is it hard to not smash it up tho? It seems it would be easy to bounce it off things as you swing with it.. Great job tho it looks great and as always you make it look so easy.. Excelent operator skills.. Thanks for the vid
@idigit4967
3 жыл бұрын
Thanks for watching! As long as your careful its pretty easy to keep it from bumping into stuff.
@kimcrofoot8517
2 жыл бұрын
What happened with the track, not enough grease?
@jesseskipper5356
3 жыл бұрын
Hey man randomly came across and watched the video. Your in my area. I just recently bought a e32 and I’m looking into doing some mowing. Any advice?
@KevinBenecke
2 жыл бұрын
Do you still have and use this head? I haven't seen it used since you got the one with the drum.
@jeffbailey7765
3 жыл бұрын
You need to check out the ASV RT 75 HD with the max cab. It has a lot glass for better visibility. I’m looking at the RT 75 HD or the RT 120 F.
@idigit4967
3 жыл бұрын
I do like ASV. John with Upstate Brush Control loves his ASV's. My only complaint with them is that they are radial lift and not vertical lift. I really like vertical lift machines but if they made a vertical lift I'd be very interested in a RT120 if I ever upgrade.
@paulthesoundguy1
3 жыл бұрын
Suggestion...... For speed and accuracy...extending the boom all the way out isn’t the most effective way Leaving the upper boom in position and letting the lower boom hand straight down and then rotate from side to side as you move foreword In rows Yields a quicker job time cycle
@idigit4967
3 жыл бұрын
Good suggestion, thanks!
@Rickimusic
3 жыл бұрын
I figured it was the sprayer who messed up a lot of that plot. Makes one wonder why bother, just mow it and avoid the wrong equipment on that land.
@MrBrooks1987
3 жыл бұрын
What does the mini ex cutter weigh? I have a kx 033-4 it’s close to 8,000.00 pounds and has around 17 gpm. Looking to buy a cutter
@idigit4967
3 жыл бұрын
I'm not sure exactly what it weighs, probably in the neighborhood of 500lbs or so. Call or email MTL Attachments, they can probably tell you but I think your 033 should be able to handle this fine weight wise and 17 gal/m is plenty of flow to run this head. This thing is a beast, you won't be disappointed! www.mtlattachments.com/brush-cutters-1/mtl-attachments-xc5-excavator-brush-cutter-direct-drive
@ipaddlemyowncanoe.7441
3 жыл бұрын
👍👍😀🍁
@hiscifi2986
3 жыл бұрын
That was a bit of 'Mission Creep'... Started off cleaning a ditch, ended up by cutting the field instead....
@idigit4967
3 жыл бұрын
Pretty much LOL
@kcalvin66
3 жыл бұрын
Use the boom like your using a weed eater?
@TheJetJock
3 жыл бұрын
Fecon would of been quicker or even a ventrac?
@idigit4967
3 жыл бұрын
Some of that stuff was a little tall and hard to reach for a Ventrac. Fecon on the mini would have been a good option too, maybe a little more overhead with wear on the teeth over blades but either one would be good. Thanks for watching!
@TheJetJock
3 жыл бұрын
IDigIt4 enjoy watching them, keep it up and thanks for the reply. Stay safe
@TheUserid82
3 жыл бұрын
As you are in an area without major freezing temps pickup one of the large water filled extinguishers that you pressurize with air. You get a lot out of them so good for a new brush fire or in the case of organic trash burning in the machine. Not good for a fuel or electric fire but hard to beat the volume and recharge capabilities.
@TheUserid82
3 жыл бұрын
@Tsunauticus III You would need to research the RV antifreeze in them as I am not sure. They like CO2 extinguishers get overshadowed by dry chemical ones as they are easier to use on different types of fires and can be used in areas that water would freeze. Fire suppression tech is a fun topic and covers many fields of study so lots of information on it. You also run into the odd things like strong laser pointers used to set off a fire sprinkler from outside the building once you fall into the rabbit hole of study.
@jeffmayeux1692
3 жыл бұрын
I like it when you update any service done to your machines. Is the Deere as reliable as you would like?
@idigit4967
3 жыл бұрын
Yeah its been a good machine. Its had its issues but overall I've been pleased with my 329E. And its fairly easy to work on. And the fire issue really wasn't the machine's fault, it was just a freak thing that caused some grass to get in there and get hot ignite. If I ever upgrade I'm definitely going to look at getting a Deere 333G.
@allanpeters4403
3 жыл бұрын
The Kubota may be slower than the Deere, but don't you get a better view of what you're cutting so you don't hit something that will damage the blades, plus you can get closer to the trees.
@idigit4967
3 жыл бұрын
I think the newer Deere has better visibility, I don't know that for a fact but just from looking at it, it seems like it does.
@speckliebe2897
3 жыл бұрын
Great video had to watch most of it on mute.
@piecesofpete5921
3 жыл бұрын
Run a 60g just like that at work,good strong machine,smooth as glass
@idigit4967
3 жыл бұрын
Yeah I had a 35D mini and I loved it. Most reliable machine I've ever owned. I really wanted a 60G but couldn't make it work in my budget but I really like those machines.
@LLImprovement
3 жыл бұрын
Sometimes its the smallest things that can put a machine down and cost you thousands.
@idigit4967
3 жыл бұрын
Yep for sure.
@brooksjones2443
3 жыл бұрын
Just a FYI, you want to get an ABC rated fire extinguisher. What you got there is just BC rated. The A rating is for ash-able materials, wood/paper/etc. A BC rated extinguisher will only put out flammable liquids and electrical fires. Just looking out for ya! 👍🏼
@idigit4967
3 жыл бұрын
Yeah I saw that too. I figured that a BC would be fine as if the machine really caught fire it would be mainly burning diesel and/or hydraulic fluid. In this case the small amount of material that got caught in the machine was really just a catalyst that would have ignited the fluids (luckily it didn't). But maybe I need an ABC. I appreciate the comment, thanks!
@presstifa4925
3 жыл бұрын
did you see what you chopped up ?!?!?! 14:40
@idigit4967
3 жыл бұрын
Just a bunch of brush and I might have touched the ground there accidentally.
@presstifa4925
3 жыл бұрын
@@idigit4967 MADE YA LOOK..
@JustinmWhitman
3 жыл бұрын
Yanmar??
@idigit4967
3 жыл бұрын
Good machine, though I like the Kubota better. Significantly more power in the working group and I have local dealer support if I need it
@user-gd7jj9mz7e
2 жыл бұрын
어느세월에저기계로합니까
@albertcyphers1532
3 жыл бұрын
Lost interest in the middle of the dissertation
@juanaraya9825
3 жыл бұрын
JLo de su Km
@kateristrobel2022
3 жыл бұрын
Listen to Andrew Camarata DON'T buy DEERE
@idigit4967
3 жыл бұрын
I like my Deere, its been a good machine. When it get times to upgrade I may stick with Deere.
Пікірлер: 64