Video helped out a ton. I had a difficult time getting the new one to seat, but once it did got lined up, it went in easy. I also damaged the threads on the ball joint stud when seating the control arm, which made the wing nut cross thread. ended up taking a dremel tool to knock off the bottom threads off the stud, which let the wing nut spin on easy.
@rianmutaqin9861
Күн бұрын
Thanks man, very informative video
@matmanplays3613
4 жыл бұрын
you can save yourself a little bit of time by not undoing the control nut and bolt the cv axle will fit fine through the hole. youll see what i mean when you get to that step
@earlmcdaniel6931
6 жыл бұрын
Thank you! The rented/borrowed ball joint separator was worth getting. The tool made it so much easier.
@GreaseMonkeyFever
6 жыл бұрын
Yeah, that tool is pretty sweet if you're trying to save the boot. The one thing I did wrong on this video is that the ball joint nut needs to stay on the stud towards the bottom. This protects the stud. Glad it helped and thanks for watching!
@SDsailor7
4 жыл бұрын
@@GreaseMonkeyFever Is it the same. Procedure for a 1996 accord ex 6 cyl? Very informative video. Cheers
@manuelgutierrez3301
6 жыл бұрын
I liked the video it was very informative. Thank you. My car needs this done on both sides. I have bought the parts and it looks easy to do in maybe a couple of hours.
@farmerwillis4902
3 жыл бұрын
Although I do wish there was some audio, directions was straight forward and nice cut scenes and angles.
@Ronestu
2 жыл бұрын
That's really awesome video but it needed sound or someone to explain it while you were doing the job..
@elgatogordo9523
Жыл бұрын
Thanks for the video 👍Just what I needed to replace both CV axles on my 97 Accord SE.
@charleschristianson2730
3 ай бұрын
Subbed just for your amazing channel name. Good info too.
@whatupfam5712
2 жыл бұрын
Great video!! Thanks for the small details, that helped a lot 👍🏻
@pandabush9114
3 жыл бұрын
very helpful, saved my ass right here. Thank you
@SMAAirAssault
Жыл бұрын
Lmao I feel so stupid, I was just missing ball joint and got it out! Thanks!!
@Haymaker-rd6zp
7 жыл бұрын
I like the video but no sound.Maybe there wasnt any sound but It looked like the guy was talking at times. Good video.
@GreaseMonkeyFever
7 жыл бұрын
Thanks...and yeah, no sound. I am kinda forced into this format due to the fact that the neighbor's dogs never shut up...and the kids in the park, just a few yards away, can't stop screaming obscenities at each other on the basketball court. Plus, I am not good at narration while knowing I'm being recorded (stammering and going blank from brain farts). These are designed to be a manual-vid hybrid. You can take a laptop, tablet or even your smartphone and follow along step-by-step...without having to ask, "What did he just say? I didn't catch that". And the great part is, while following along, you can listen to your own music! Thanks for watching!
@Ikius1
7 жыл бұрын
Very nice write up! Thanks alot! So many write up on the passenger side, and not enough on the driver side. I'm glad you did one where it enters the half shaft. Did you have to replace the seal on the half shaft ?
@GreaseMonkeyFever
7 жыл бұрын
No, and luckily it did not leak. I wanted to, but the friend of a friend who owned this car didn't want to buy the seal. Thanks for watching!
@renenunez4015
2 жыл бұрын
Tanks good video
@chrissanchez9984
7 жыл бұрын
can you do a diy tune up for this car please
@LA_Commander
Ай бұрын
Easier to remove the cv axle nut with the wheels on the ground. That is, if you don't have an air impact tool.
@lazylegs15
7 жыл бұрын
Just to add, you're supposed to wait until the weight of the vehicle is resting on the suspension before you torque any bolts. Doing otherwise will lead to premature wear of the bushings.
@GreaseMonkeyFever
7 жыл бұрын
Thanks for the tip! I've never heard that, but it does makes sense. But then again, everything on a Honda is insanely torqued down anyway :) Thanks for watching!
@lazylegs15
7 жыл бұрын
I heard that. People over torque bolts on Honda's all day long lol and no problem my friend. Good wrenching!
@roadworthy6901
7 жыл бұрын
Great and to the point!
@GreaseMonkeyFever
7 жыл бұрын
Hope it helped...thanks for watching!
@artsmart07
Жыл бұрын
had both new axles put in by a very competent mechanic the other day. (1997 honda Accord 2.2L auto)The driver side came out of the tranny and is leaking like crazy, a Valvoline oil change shop told me today. Can the shaft be tapped or hammered back in by only removing the outside axle nut? Thank you
@RocRoc843
3 жыл бұрын
What is the list of tools to do both front cv axles on a 95 accord
@StephenDuncan
7 жыл бұрын
Is this accurate for a 96 Accord EX? And also what would be different for the passenger side? Thanks!
@ColAngus
7 жыл бұрын
Yes it's accurate for a 96 and the only difference for the passenger side is that it goes into the transmission instead of a half axle and so you might want to replace the axle seal,super easy.
@DaeganJones
4 жыл бұрын
Much easier to pop the upper control arm.
@carlloftin2850
5 жыл бұрын
How do you know the ball joint is seated correctly? Does it “ pop” into place?
@aaronanderson7794
6 жыл бұрын
So I am having to replace my CV inner boot, got that done, had to replace my tie rod end and my lower ball joint, have everything done, but I can't seem to get my strut to line up with the lower control arm to put that bolt it.. what would you recommend?
@theadmiral460
6 жыл бұрын
same issue here
@DiegoHerrera-fr8gg
3 жыл бұрын
Does it work also for the 1993 honda accords
@johnl.952
7 жыл бұрын
i noticed that your jack stand is more inward from the recommended jacking point. My question is, can you put jack stands under the jacking points or does it need to be where yours are placed ? Thanks for the video.
@GreaseMonkeyFever
7 жыл бұрын
On most vehicles, the jack stand points are right on the body, and the scissor jacks that come with the vehicle are designed to fit in that ridge. That's OK for changing a tire on the side of the road, but when the vehicle needs to be lifted for an extended time, and your going to be underneath it, I jack it up on the frame (or the frame equivalent on the unibody). It's just a little more secure.
@keweebelly
7 жыл бұрын
THANK YOU
@sato3616
7 жыл бұрын
WOW
@REDLIONJaxFL
4 жыл бұрын
Do you need to do a alignment after this
@GreaseMonkeyFever
4 жыл бұрын
It is a good idea to get an alignment anytime you mess with steering or suspension components. Thanks for watching, Shaakir
Пікірлер: 42