Parts for changing the oil in the CVT #0AW #Audi #A6C7:
Febi 27975 Autotransmission oil (CVT) 6-7pcs (original oil VAG G052516A2)
VAG 0AW301516H Oil filter
VAG N90666003 o-ring 2pcs
VAG 0AW301685C oil Pipe
VAG WHT003157 screw 3pcs
VAG WHT005623A drain Plug
AIRLINE AT-BS-24 1/2 DR Head with TORX T60 AT-BS-24 95
===================
Required tool: Torx T30, T60, Spline M10
===================
The order of the actions:
1) clean the filter housing of the variator
2) Unscrew 2 mounting bolts with T30 and M10 pipe
3) remove the oil pipes
4) Unscrew the 3 screws on the Torx T30 filter housing
5) remove the torx T60 drain plug
6) remove the tube from the drain hole
7) after the oil is completely drained, insert a new level tube and tighten the plug
8) remove the old filter
9) pour 6-6.5 liters of new oil through the filter hole
10) install a new filter
11) change the o-rings on the oil pipes, insert them into the filter and tighten the mounting bots
12) start the engine and immediately raise the speed to 2500
13) use VAG-COM to monitor the oil temperature in the variator, wait until it is 35-45 degrees Celsius
14) switch the gearbox selector to different positions, wait a few seconds for each gear
15) when the temperature reaches 35-45 degrees, with the engine running (!!) Unscrew the drain plug, the excess oil should drain, if nothing has merged, then you need to add more oil
16) if more than 100 ml has merged, then the level is normal, you can tighten a new plug, the oil change in the variator is finished, the next replacement in 40000-60000km
===================
My blog on DRIVE2 www.drive2.com/users/mark47/
Негізгі бет Автокөліктер мен көлік құралдары CVT oil change OAW Audi A6 C7 / A4 B8
Пікірлер: 201