I was glad when you said you were disposing of the tyres after seeing all of that paint on the around the edge of the rim! I see from your later videos the 130 turned out really good, so well done. I see so many paint jobs where the tyres haven't been masked off when painting and they've not been replaced either 😱
@miriamrobinson9283
3 жыл бұрын
Love this video been here since you started out keep up the good work
@mrcvx
3 жыл бұрын
Brilliant thanks
@ado239
3 жыл бұрын
Tidy job lad. Fair play 👍
@markoconnor1291
3 жыл бұрын
Good work, very helpful 😁
@mrcvx
3 жыл бұрын
Glad it was helpful!
@patodwyer721
3 жыл бұрын
Great video. I think what you're doing is time well spent. A lick of paint works wonders to freshen things up and gives your operation a more professional look. Well done.
@mrcvx
3 жыл бұрын
brilliant thank you
@cillianmoore7729
3 жыл бұрын
Loving the videos keep up the good work
@mrcvx
3 жыл бұрын
Thanks
@brianovington
3 жыл бұрын
Swarfega works well for masking as water will wash it off
@db1410885
9 ай бұрын
Hi ,im about to do the rims on a mx 110. Just wondering would you have a code for the silver paint . Great videos to watch as we running a cvx195 also
@deutz3904
3 жыл бұрын
nice job tractor. Will look well when finished. least if the tractors are kept tidy it pays back in the resale
@mrcvx
3 жыл бұрын
Exactly pays to mind them
@seimimcdonagh7780
3 жыл бұрын
First love the vids
@kieranhanley6735
3 жыл бұрын
powder and paint would fool a saint. keep them comming
@FORD-jh5io
3 жыл бұрын
Looks well lad
@mrcvx
3 жыл бұрын
thanks
@philipoconnor2236
3 жыл бұрын
Great job on the rims!! Came out very nice indeed! Would you be spraying around 50psi? Do you have a watertrap on the air line? Or is there need?
@mrcvx
3 жыл бұрын
Can't remember what psi it was to be honest. I'd fit a water trap at times. By right you should fit it all year round
@ghostrider7688
3 жыл бұрын
You’ll smarten it up nicely in fairness now man . Hope she goes well for ya now next year. You’ve part worns in the other shed are ya gonna put all the new rubber on last ?
@mrcvx
3 жыл бұрын
I've the seat back so probably the seat and tyres next
@declanfarmerjoyce7639
3 жыл бұрын
😱😱 Very interesting video again. 👏👏👍👍 At first, ya it was hard to see the difference,for me anyway. But as you went through the video. Ya I could it. 👏👏 How long have you been doing this on KZitem? Great video. 👏👏👍👍
@mrcvx
3 жыл бұрын
you will be an expert on them yet ! started it around july i think
@declanfarmerjoyce7639
3 жыл бұрын
@@mrcvx I don't know about that now. But we'll see how thing's go, anyway. 😂😂🤣🤣😅😅👍👍
@thomasconlan9096
2 жыл бұрын
What spreay gun did you use 🤔
@darrenprior8579
2 жыл бұрын
What ratio do you mix primer to thinners? Thanks
@hillviewfarmcookstown1682
3 жыл бұрын
Is that a truck chassis holding up your shed roof?🙈 Strong job if it is ☺️👌
@mrcvx
3 жыл бұрын
Yes beams are made from truck chassis
@mcflowers197900
3 жыл бұрын
How much thinners do you like to add to paint, I find that the most difficult to get right
@ferguson20diesel49
3 жыл бұрын
mcflowers197900 if you boil the can of paint in a saucepan you don’t even need thinners. Make sure you take lid off or it will explode. It gives it a better shine as well. But you will need more paint.
@mrcvx
3 жыл бұрын
The comment above is correct that helps thin the paint. Honestly I don't use any apart from on primers it just makes it too watery. The little drop of hardener is a better bet. Two pack paint is the only paint to hold its shine
@ferguson20diesel49
3 жыл бұрын
Mr cvx primer is great for the paint to last on the surface. Paint also Varys a lot from brand to brand. Usually get sparex or tractol paint from brogans. But I recently got case silver from tractor line and it’s way better paint for the same price. Great shine off it.
@mrcvx
3 жыл бұрын
Best paint I ever used was hempel paint. It's a marine paint
Пікірлер: 41