FINALLY AFTER ALL THE HUNDREDS OF VIDEOS I'VE BEEN WATCHING THIS IS THE ONE THAT HELPS ME
@jeffrey596
4 жыл бұрын
should i water my bike gears
@ahmedfaisal7966
4 жыл бұрын
+11111111
@GameWave_Studio
4 жыл бұрын
Same
@Annibals
4 жыл бұрын
Exactly
@efrainsaucedo3134
4 жыл бұрын
Yep. Just wish it had close up visuals of the gears
@ThiliRocks
2 жыл бұрын
Best explanation in youtube. Explained in a layman's terms. All those other videos not getting to the point. All you need to know how to go fast and how to climb. What's the hardest and what's the easiest.
@mdr6294
4 жыл бұрын
I’m in my 50’s and last time I have ridden bikes was when I was in my teens. And now I just got a used bike and will try to ride again.
@colleensinghpall7742
4 жыл бұрын
I'm 58 & started riding only 3 weeks ago feels gre8 ...go for it👍👍
@3kwraap348
4 жыл бұрын
Colleen Singh Pall I was 6 when I started riding and stoped at 9 and I’m starting again at age 19
@joshbaxter5036
3 жыл бұрын
Same here. Back in the day we callled it a 10 speed with 5 in the back and two in the front. Thought my new bike was a 21 speed with 7 x 3. According to this its only a seven speed. Oh well. It’s still better than the old “10” speed. Happy riding!
@colleensinghpall7742
4 жыл бұрын
Only bought my bike last week was struggling to understand gears...this is the best video I've watched...very clear..brilliant... Thnks
@studiosingyourstyle
3 жыл бұрын
Thanking God you made this video! I’ve never met a biker who’s been able to explain gears in a way that anyone could understand!
@ecramer4479
5 жыл бұрын
Really helpful thank you!! Since my boyfriend does a lot of racing and I do a lot of hills around town running errands, I came up with a dumb way to remember this so I stop wearing myself out using the wrong gears. Here, Butt refers to the cassette in the back, and Arms refers to the gears in front. Big butt, small arms climbs hills. Small butt, big arms wins races. And now you have to think about butts!!!
@nalaqueenofthejungle
3 жыл бұрын
Haha. Until you have mechanical shifters. Then I have to add one more: big/big, little/little, big/little, little, big. Meaning big shifter on right hand will shift to big wheel in the “butt”. Little shifter on the right hand will Shift to little ring on the “butt”. Then big shifter on left hand will shift “little” ring on the “arm”. And “little” Shifter on left hand will shift “big” ring on “arm.” .....or is it vice versa lol?!!!!
@ramsaycobbler8499
3 жыл бұрын
@@nalaqueenofthejungle sleep
@williamfrazer8691
6 жыл бұрын
I am just purchased a new bike. It has been 30 years since i last rode a bike. The bike back then had 3 gears. The new bike has 27 gears. Your KZitem programme has helped me sort out the new gearing system. This has been a big help to me, so thank you.
@brandonfield3993
2 жыл бұрын
Perfect! Simple and sweet is exactly what I needed. I got a bike from Walmart and I have a suspicion it wasn't chained properly. The gears on my handlebars don't seem to match with where the chain is on the gears. But now I now how to tell. So thank you!
@nicholasssewavamulijja4660
4 жыл бұрын
Finally I’ve got someone who explains very nicely when to use of various gears and which type of bike to buy. Thanks so much 👍🏽
@AznTony360
4 жыл бұрын
By far the best guide on KZitem. A lot of information in between, but the ones I wanted to know was which is best for hills going up or down... and which gears are easiest to petal and which are hardest to Peter etc.
@robertmayer6696
3 ай бұрын
I want to thank you for taking your time and fully explaining how the gears on a bike work!!! I never knew what you explained. Best regards, Bob
@perniciousreaper4393
3 жыл бұрын
Industry standard for "speeds" is to multiply the number of chainrings by the number of cogs in the back. That gives you your total number of speeds. That's important because 2 chainrings and 11 cogs combined give you much more than 11 distinct gear ratios. Using your bike as an example, the industry-standard number of speeds is 22. Technically speaking, you only have 21 speeds, because being in gear combo 1,5 and gear combo 2,2 duplicate a gear ratio of 2:1. You also have near-duplication at 1,7 and 2,3...but they're distinct enough. According to industry standard, you have 22 speeds on your bicycle. Practically speaking you have like 16-17 usable speeds. That said, fewer and fewer people refer to gearing in that manner, and manufacturers are getting away from it in their marketing as well. The cat has been out of the bag for some time that more speeds doesn't necessarily = better. This is why it has become much more commonplace with MTB's to refer to it by (# of Chainrings) x (# of Cogs). You don't hear many people on the trail talking about their drivetrain as an 11 speed or an 18 speed anymore. It's usually "one by eleven" or "two by nine." When people talk in number of speeds it's usually someone with a 1x.
@danielaspiazo2761
4 жыл бұрын
Finally! A video that actually makes sense and explains things in an easy-to-follow and easy-to-understand way for people like me who don't know that much about bikes. Thanks! Thumbs up!
@bhaskaranramesh
7 жыл бұрын
awesome..nobody explained it this way..makes sense now that u did...great work
@ohcrapitsmrG
7 жыл бұрын
what is a 21 speed bike? i see it online.
@dougefresh133
7 жыл бұрын
ohcrapitsmrG Triple chainring on the crank (3), × a (7) gear freewheel or cassette on the rear, equals 21 speed.
@georgeedwards4041
4 жыл бұрын
@@dougefresh133 n
@haseebabbiii1
4 жыл бұрын
@@ohcrapitsmrG 21 is the multiple of 3 and 7 (3x7 = 21) 3 are the gears on left side of your handbar while 7 are on the right side. 3 shifter changes the gears on chainring (found exactly near your paddle) 7 shifter changes gears on the back of your wheel. The number of gears/rings on the back actually determine the speed of your bike. 21 speed means bike has 7 gears/rings on the back.
@haseebabbiii1
4 жыл бұрын
@@ohcrapitsmrG 21 is the multiple of 3 and 7 (3x7 = 21) 3 are the gears on left side of your handbar while 7 are on the right side. 3 shifter changes the gears on chainring (found exactly near your paddle) 7 shifter changes gears on the back of your wheel. The number of gears/rings on the back actually determine the speed of your bike. 21 speed means bike has 7 gears on the back.
@Venom69696
6 жыл бұрын
Thanks for the video. I understood like 70% of it, better than other videos on the same topic.
@christianantony2107
4 жыл бұрын
just started with cycling. Awesome explaination! I finally get it! Also, I just learned that my bike is even worse than I thought! You say 11 speed I have 7 speed....
@Petfriendlyfarmhouse
2 жыл бұрын
Have seen quiet of videos on cycle gears. Yours was the best explanation i have heard and understood. Keep up the good work.
@markay_
2 жыл бұрын
For me it‘s easier to rember when thinking about it this way: When the chain goes diagonally from lower left to upper right, then the gesr is hard because it resembles an uphill section. When the chain goes from upper left to lower right, the gear is easy, because it resembles a downhill section. I hope it makes sense. Just follow the chain position.
@georgesweet5441
3 жыл бұрын
I'm new to cycling, this explanation is excellent. Simple, to the point.
@VanellikaB
5 жыл бұрын
Great job, I have watched a ton of videos trying to figure out how to use my gears. This one was the best!
@oceaniccurrents
4 жыл бұрын
Outside Gears (front and back) = hard and fast. Inside Gears (front and back) = easy and slow
@martinmaxwell1530
5 жыл бұрын
I'm new to riding bikes with gears and I just bought my first bike in 30 years. It has 7 gears in the rear and 3 in the front. This explanation was what I needed to get a basic understanding. I have to wonder why the largest gear at the back wheel isn't named #1 or first gear since it's the gear for low speed. It would be less confusing that way with #1 designating the slow gear on both front and back. Wouldn't it?
@gilboston20033
4 жыл бұрын
The easiest way to understand is: A- When engage the biggest gear (pedal or driven) to the smallest gear on the back wheel (driver) each turn from the pedal spins the back wheel about 6 times or so, which means, more speed and less torque. B- When engage the smallest gear (pedal or driven) to the biggest gear on back wheel (driver) each turn from the pedal spins less than on A. Botton line: More speed less torque, less speed more torque. To climb hills, more torque, to go faster less torque more speed. Any car has the same mechanism we can't see inside the transmission.
@karmalacksskill773
4 жыл бұрын
I learned more about gear ratio in this one video than a month of IT in middle school 🤦♂️
@hermezmoshi9116
5 жыл бұрын
Thank you for a great job, easy to be understood without any complications on explaining how gears work.
@abz2995
5 жыл бұрын
Hermez Moshi yes he is cool
@Ballerfella2007
2 жыл бұрын
Great job I just moved from my mountain bike to my new road bike. It's like moving from a bomber plane to a fighter jet. This really helped out a lot thank you! Cheers!
@TheDaikashido
6 жыл бұрын
it makes perfect sense if you think about it, its about leverage. On your crank gear you have a distance between the axis and the place in the diameter where you're applying power. On the final drive its that same variable, the distance or radius from the center of rotation to the edge of the current gear
@baileyhuff6732
6 жыл бұрын
Thanks man I just fixed up my old bike and this really helped me to learn how to properly use my bike, I don't even have a 9 speed I have an old 7 speed bike but I hope to upgrade as I start riding more.
@CodexVR124
4 жыл бұрын
"Get at least a 10" *Looks at my seven speed*😶
@chrisanderson4044
4 жыл бұрын
4Star Jedi EXACTLY WHAT I JUST DID 😂
@ICDedPeplArisen
4 жыл бұрын
Your bike has speeds?
@toochiemacc
4 жыл бұрын
😂
@jeffrey596
4 жыл бұрын
should i water my bike gears
@georgen7467
4 жыл бұрын
I have 21 loser 😂😂
@TheAnkhorus
5 жыл бұрын
Great straight forward explanation with awesome editing too! Thanks.
@TraumaER
4 жыл бұрын
One of the best videos about this topic!
@gregnixon1296
6 жыл бұрын
I can't see that more than 7 gears are ever needed for most people. The redundancy of some gear ratios eliminates the need for multiple similar combinations. The Saturday and Sunday morning riders on $1000-$2000 bikes make me scratch my head.
@aserta
4 жыл бұрын
You know what makes me laugh my ass off? Yoke heads with downhill bikes in full suspension package...sunday riding in the park. Every branch, every branch in the stupid tree, they hit, and broke.
@The-ii5jo
4 жыл бұрын
Its mostly marketing and hype. I never felt the need to "upgrade" from 7 speed because it works fine for me and if anything the chain is more durable. I can easily do 100 mile rides without any problems. You can even use cogs from 11 speed cassettes to find the perfect ratio that fits you
@get2siva
4 жыл бұрын
By far THE MOST SIMPLEST and IN DEPTH Explanation of the Gear systems in Cycle I've seen so far. THANK YOU Bro ! Looking forward to more informative videos from you...
@MisiBra69
6 жыл бұрын
Every other video was confusing compared to this one. Cheers mate
@peterl1167
4 жыл бұрын
Thank you. Out of all the videos and articles I have seen so far, this the best and most simple to understand.
@tombeals8980
7 жыл бұрын
If I have a truck with a 5 speed transmission and a 3 speed rear axle I have a total of 15 options. You having a two speed front gear and an 11 speed rear gear have an option of 22 gear ratios from which to chose. No matter what some person may chose to call it, your bike is a 22 speed.
@ShubhamSharma-tn3wm
7 жыл бұрын
finally, someone made some sense here. :)
@Endeva09
7 жыл бұрын
Incorrect, while yes there are 22 different combinations available there are not 22 different gear ratios, (well there are, however at least 4 of them will be basically the same ratio however the power transference is completely different
@tombeals8980
7 жыл бұрын
I do not have a degree in Physics. And I think that you probably know a lot more than me on this issue. I think that this is just an issue in semantics. You may call a bull a cow, if you want. But please don't try to milk it.
@tombeals8980
7 жыл бұрын
adding to that, I do realize that all the options available are not really practical.
@anthonyallen146gmai
3 жыл бұрын
I watched your video and it all made sense!! Biking without the BS!! Thanks! 😄😄
@valentineawe8573
2 жыл бұрын
I have seen like 5 videos and didn't understand.. you really did a good job and it is sooooo clear . Thank you
@acevehe
4 жыл бұрын
Thanks for explaining this in a way that's easier to understand. This is a good video to jumpstart learning about biking
@Charles-mr7ff
4 жыл бұрын
That's how you explain to a newcomer. Cant get easy then this. Thanks buddy.
@suzanneneikirk5544
7 жыл бұрын
thank you for making this video i have never had the gearing explained this way before and now i get it. well done.
@rogerwilliams4742
5 жыл бұрын
Super simple, short and sweet. Thanks bro!
@dougfarris312
4 жыл бұрын
Great video and very helpful. I am a beginner and still learning about this very complex sport. Thank you!
@MrSoulMonk
3 жыл бұрын
Just what I was looking for! Great video and crystal clear explanation. Thank you!
@rachanabc3
6 жыл бұрын
Omg u r so perfect while explaining .. I also understood!!
@Dipidychip
6 жыл бұрын
Oh FINALLY?!! i have watched so many vuds telling the gears but they are sooo confusing and it always ended on 90 rpm like how am i a beginner going to calculate dat ? This was sooo simple
@petersmith2040
4 жыл бұрын
This is more confusing than driving a car with manual transmission. FYI, I can drive a stick shift vehicle. Now, I understand why I always prefer to ride on a single speed bike.
@ejroughley
5 жыл бұрын
Great explanation but I still don't understand how that applies to the little gear toggles on the handles.
@roshimahanta
7 жыл бұрын
Great video ! Thank you so much for putting all the required information about the gears together for an amateur like me. It couldn’t have been put in any other simpler manner. Good job dude. 👍🏻
@gruzich1
Жыл бұрын
I could agree with you more ! I've ridden bikes for years, and never understood this. Now I'm old and these little hills are kicking my butt.
@MegaBALLINOUT
Жыл бұрын
Video was simple and very easy to understand just got into biking with gears
@l0stv0id44
7 жыл бұрын
You explained everything very well and in an easy to learn way, thank you for helping me figure out my gears!
@_Matchu
2 жыл бұрын
2 questions: Is it okay to shift while pedaling? Is it okay to shift while under tension? ie while pedalling uphill you realize you should be in a lower gear so u want to down shift, is that okay? Thanks -from a noob
@TRex-lo2bt
2 жыл бұрын
You should only shift while moving as you can only shift when your chain is moving and it fine to shift uphill on tension.
@oulanhkeola5925
2 жыл бұрын
Thanks for the explanation, so front vs rear, which one should I be adjusting most when cycling.
@MissLionRose
5 жыл бұрын
NEW subscriber! This is the first video I watch from this channel, already loving it! thanks for the pearls!💃🏻
@rommie1952
4 жыл бұрын
Very helpful and easy to understand video! Thank you
@harvey-a-zeledon
5 жыл бұрын
Plain and simple! Great Video, just what I was looking for.
@TanveerAhmed-gl5jk
3 жыл бұрын
The best no time wasting . Briliant video what i was searching Got it right here .thanks buddy.👍👍👍
@gomezalejandrog
4 жыл бұрын
I have a 9-speed bike (with three chain rings in the front). I'm absolutely a beginner to all this terminolgy but I'm thinking I want more gears to hit higher speeds going downhill.
@josephoguike6738
4 жыл бұрын
Thank you man. This video explains everything easy and quick! Thank you
@Kingcarparpeggio
4 жыл бұрын
I've got a 3 speed Sturmey Archer......it rocks ( quite a lot actually ) 😂😂😂
@spacetase2560
6 жыл бұрын
thank you! how difficult it was for someone to say "11 speed bike is the amount of gears are on the back" of the cassette
@SisterBaby
3 жыл бұрын
I don't think he said that correctly. The number of gears is actually the number of combinations you can make using the front and the back rings. So multiply the number of rings on the back times the number of rings on the front. He had 2 on the front and 11 on the back, so that makes 22 combinations or total gears.
@melissaramirez9492
3 жыл бұрын
THIS WAS SO HELPFUL!!! Thank you!
@robertmejia4554
2 жыл бұрын
For me this.video has the best information about the bike shifting.
@ratunaikatolu6978
4 жыл бұрын
Thanks brother. Really understand how the gear works👌👍 keep up the great work
@Annibals
4 жыл бұрын
Thank you so much you are the only one who summed it up right
@godtiermedic
4 жыл бұрын
I am now a master... 2 hours later my chain fell off while changing gears
@MertikayyYT
4 жыл бұрын
Were you moving whilst you were switching gears?
@colleensinghpall7742
4 жыл бұрын
The same happened to me the first day my chain came off...asked a passer by to help put it on...😁 I've now set it on 3rd gear comfortable 4 me..
@davidduncan1362
11 ай бұрын
More is not always better. I just enjoy having more gears on the crank set because I can use the extra chain rings to keep a straight chain line through a wide range of gears with a relatively small set of back gears (3X6 speed for example). With added chain rings to the middle one, I would no longer have to cross gears to go to extremes. If my gear numbers were two on the right (2/6) and two on the left (2/3) and I wanted to go a little easier, I would downshift the left to first gear and upshift the right to third gear. That way, my gear ratio is similar to the extreme low gear in that middle range of gears and my chain line stays straight. If you have a 3X6 speed bike, you should only use low first to low fourth, medium second to medium fifth, and high third to high sixth gear. That gives you twelve gears that you can still use for some big range. NEVER use low sixth gear on a 3X6. That would be very bad for the life of your chain and the the life of your gears.
@ksbajwa1922
6 жыл бұрын
That’s the way to explain nursery class good job
@abdelrahmanalnajjar815
4 жыл бұрын
This is the best explanation on Gears. Thank you very much
@dmmchugh3714
4 жыл бұрын
I have a Marin Terra Linda which is speed . I love it and am riding more each week. This seems to have all the speeds I need, not sure why a 9 speed would be belittled.
@ramonestradat
3 жыл бұрын
Fantastic explanation! Thanks a lot. 🙏🏼
@kyoyacchi5567
4 жыл бұрын
The exact video I've been looking for explaining how to use my gears. Thanks! New subscriber here :D
@mrweisu
4 жыл бұрын
This video is for people who are kinda serious about bicycles. For your typical moms and dads, don't listen to him. My daughter's bike has three gears front and 7 in the rear. And I think 7 is more than enough. Sometimes, it is very hard to figure out the difference between 5-7. In fact, the real ratios available for my daughter's bike is 7x3=21 ratios. I think to be fun in everyday riding, that is too many. Better focus on riding bikes instead of playing with gear ratios. I guess 3x5 or 3x4 is good enough. When I change the gearing for the front, there are only 3 ratios, but the Shimano can very quickly adjust. No delay at all. Finally, the bicycle makers make it confusing as hell. Left hand changes front gears and right hand changes rear gears. Small number for front stands for smaller gears and smaller number for rear stands for larger gears. This is semi-okay because smaller numbers always stand for easy pedaling. But the lever for easy pedaling is on top on the left side. The lever for easy pedaling is on the bottom on the right side. Very confusing.
@Phis213
5 жыл бұрын
Sob!!! I read the front 10 spd but the back is 9!!!! Thanks for the explanation.
@alexXisXmyXname
5 жыл бұрын
Only way to understand what he means by taking forever to switch gears is by riding your bike id assume. My 8 speed domane al 2 2020 took that mother out the other day when i realized my breaks are also gear shifts. I was shifting alot of my left n really anxious i broke the damn thing. But in the video you helped me a bit rationalize what was really going on. Gonna put it into focus next ride tysm
@aroshakottege9238
2 жыл бұрын
Best explanation so far! Thank you
@dbek446
3 жыл бұрын
Thanks for sharing. very easy to understand. What is the best combination of years / is there any rules around which chain ring should be applied when in different gears on the cassette?
@JamesPliny
4 жыл бұрын
It seems to me that with 10 gears in back and two in front you have 20 possibilities. That seems like a lot! Why not have 7 in back and 3 in front? That some how seems simpler and stronger to me. I remember having 5 in back and two in front and having no problems finding the right gear, I admit sometimes requiring a double sift.
@chemykl
6 жыл бұрын
Good job man! I watched a couple of other vids on the subject and yours was the cleanest by far.
@davidrivas3968
4 жыл бұрын
Wow you are the best thanks watched a lot of videos but you explain it the best.
@royajunique
5 жыл бұрын
Brilliant explanation. You made this gear thing easy. Thanks.
@ChuckNoctis
3 жыл бұрын
Im building a bikepacking setyp. What is the best granny gear I can get with a 1x12 speed? I don't really care that much about high speeds on flat terrain.
@lil-neutron1437
6 ай бұрын
Very informative and self explanatory 🙏🏽
@robertgraham9598
5 жыл бұрын
I'm looking at used bikes to buy and am more confused now than before I watched this. I googled "how many bike speeds are on my bike?" and the top explanation was from bicycleuniverse.com, which reads " think of gears as the same thing as speeds - a bike with 18 gears is an 18-speed bike. Bikes generally have 1, 3, 18, 21, 24, or 27 speeds. (10- and 15-speeds are obsolete and you don't see them on new bikes any more.)" 11 speed (this bike in video) isn't even mentioned in that description. The bike I'm looking at has 8 gears in back and 2 in front. So, it's only an 8 speed? I thought it looks like a great racing bike, but there are 21 speed bikes out there; how do they even fit 21 cogs on the back? SO confusing.
@monkeyb1820
5 жыл бұрын
To a good extent you can 'trust' the default' setup on any decent quality entry bike (eg. maybe like $400+). Not all gears are usable. He did not get into this aspect. Eg. You never want to be on the smallest chainring (easy) and smallest rear cog (hard pedaling). If you do this, then the chain is under a lot of torque (not lined up straight, instead going from front left to rear right). This is bad for your chain. Instead of being in this gear a person should be on the larger front chainring, and a middle rear cog. So an important thing that newbies don't get is that not all gears should be used, you don't want to overly torque the chain. My bike has a triple chainring up front, although I've hardly ever needed the smallest chainring.
@robertgraham9598
5 жыл бұрын
I get what you're saying though I've been riding a road bike for years. I bought a Cannondale Caad3 in '96 for $1200 then had to add clipless pedals. Ive been riding it ever since. I have never had the chain at an "angle" where it's on the far left cog in front and far right in back or far right front and far left back. However, I want to sell my bike and have no idea what to tell people in terms of how many speeds I have. If I tell a novice the bike has 8 speeds, they might go somewhere else to buy one that has the same number but is advertised as 16 speeds, or is it considered 10 speeds because 2 in front and 8 in back totals 10? IDK
@monkeyb1820
5 жыл бұрын
@@robertgraham9598 for selling purposes I'd probably just call it '16 speeds. 2 chainrings up front, 8 cogs in the back'. Obviously, they're not all usable gears, but I think it's still common to boast that they all exist.
@gslip4884
2 жыл бұрын
Jesus Christ, thanks for explaining it like we are 5 y.o. Very helpful to receive the info after which you won't feel dumb.
@anthonyespinoza2734
5 жыл бұрын
Savior!! Thank you! For keeping it to the point and simple all these other videos are like uhhh some bikes have high gears blah, blah, blah, then explains a non relating topic of the gear 🤦🏽♂️
@bobsponge667
6 жыл бұрын
Great and simple to understand on first time watching
@abdulharis9390
3 жыл бұрын
I took almost a month to understand about this gearshifting before I actually felt brave and confident enough to ride my bike.In the meantime my bike had been gathering dust.🤣🤣🤣🤣
@Gkitchens1
4 жыл бұрын
Remember back in the 90s when they came up with crazy 21 and 23 speed bikes? Yeah the 21 speed is just a 7 speed but it has 3 ring gears. I'm only on this video because I had a next breakpoint pro as a kid and absolutely loved it...til a neighbor dude rode it and jumped it over a stump into a deep ditch and bent the shock into an L shape...well icjust got my hands on a next tiara pro which is the female version of the breakpoint, and in my opinion the better looking of the 2, and I'm excited to get back to riding a hike. I miss the freedom of it.
@Ria-dp7eu
3 жыл бұрын
Bought my bike 3 days ago, all these years I have been riding a bike without gears and now it's really frustrating which gear to use, can someone explain to me again that which gear to use for uphill and which for downhills.
@abhishekdeepak
2 жыл бұрын
This video is confusing because when i climb then i use gear 2 on the front and gear 1 on the rear. For downhill or descending, i use gear 1 on the front and gear 9 on the back cassette.
@abubekerahmed2992
4 жыл бұрын
that is what I was looking for thank you for your easy explanation
@peterbaskind9872
5 жыл бұрын
105 is entry-level? Really? The new 105 group set is stellar. Frankly, there is very little difference between it and Ultegra. For the vast majority of riders, R7000/R7020 is more than adequate, if not luxurious. Indeed, I have new Ultegra shifters and hydros on one bike and 105 on the other. I can’t tell the difference.
@N0rmandy
Жыл бұрын
Thank you! This is perfect for beginners
@rose106
6 жыл бұрын
I watched several videos. This one makes sense.
@joshuaworth243
Жыл бұрын
This was very helpful and well conveyed
@kopikofootpuma6380
2 жыл бұрын
Moment I saw high and low range. I knew I needed KZitem lol
@newagainpools2794
5 жыл бұрын
What is the best gear sitting for somebody who just wants to get from point A to point B without killing yourself but still making good progress?
@newjoyyork
4 жыл бұрын
New again Pools same, I’d like to know. The last time I rode a bike was when I was a kid, but I miss it. I didn’t realize getting a new bike would be so complicated.
@victorlalicon9287
2 жыл бұрын
Well explained, simple non-technical.
@soultaker5577
6 жыл бұрын
If you put 2 chains one on the easiest gears to paddle and one on the faster to go , wouldn't you have both of the advantages ?
@Dr0ctober
6 жыл бұрын
ReGaL' FirstDc Holy shit I hope NASA snatches you up before obesity does. You are a national treasure.
@soultaker5577
6 жыл бұрын
+Dr 0ctober thank you , :)
@warwingsenthusiast5672
5 жыл бұрын
Basem Mlika There are some people who are against that as it crosses your chain (bends the chain and over time can cause damage to your cassette and chain rings) Now, Idk about putting two actual chains on the drivetrain 😂 You would need to jerry rig two extra derailleurs to make this work
@nocrs0659
5 жыл бұрын
smh. You could. Use 2 chains with one crank set and cassette. You couldn’t have the chainrings spin at two different speeds at the same time anymore than you could have the cassette spin at 2 different speeds.
Пікірлер: 496