Nice review. I have a P-09 in 9mm an I love it. Also I have a P-07 Kadet in .22LR and is a great gun for plinking! I love CZ pistols... I also have a SP-01 Shadow and a P-10 F. My future CZ will be the Shadow 2 and the P-01. Best regards.
@stewb520
10 ай бұрын
CZ is for sure (in My opinion) 1 of the best !! Thanks for the comment !
@grandpaweber2097
9 ай бұрын
Good video, Sir. I bought my .40 P09 back during the panic of 2012 when 9mm was unobtanium but .40 was still on the shelves. I picked CZ because Bud's had it for $375.00 (?!). After firing it, I could not believe what a deal I had gotten. What a smooth shooting, accurate pistol, good capacity too. I recently upgraded the trigger and now it's a GREAT firearm. I have plans now to get the slide milled and an RMR installed. Best regards.
@stewb520
9 ай бұрын
It is Definitely a great Pistol !! thanks for the comment!
@machendachen
9 ай бұрын
Got the 1st gen P-07 Duty over ten years ago and barely picking up the P-09 tomorrow at my local FFL! 😁
@stewb520
8 ай бұрын
The P-09 is a Great Gun !!
@HighCappa45
5 ай бұрын
Awesome video👍🏼👍🏼 I’m currently going through separation anxiety cause mine is currently at JagerWerks. Getting an optic cut for the SRO and some custom slide milling with a 4-8 week lead time 😢
@stewb520
5 ай бұрын
Yup , waiting is the worst !
@82lowe36id
9 ай бұрын
My two favorite polymer pistols.
@stewb520
9 ай бұрын
They are great !!
@_porkadobo
10 ай бұрын
Awesome video. I’ve got a p-09 on waiting on permit. What holsters are you running on the p-09?
@stewb520
10 ай бұрын
the holster is from "concealed concepts" from ebay
@89Harry89
3 ай бұрын
Nice video you got here :) I have bought second hand P-09 recently and I want to ask, if barrel crown is a little bit shine after cleaning or not? Something like gloss grey or so. Mine isn't black as other parts of barrel so if I should worried about rust etc. (I really don't think so, feeding ramp is mirror like as well chamber but I just want to be sure). There were tons of hard carbon in barrel and after cleaning with solvents, brass brush etc. I've used polishing paste for last remnants. I can't imagine how I could damage the nitriding with a fine paste on a soft cloth brush so anticorrosion durability should be still same.
@stewb520
3 ай бұрын
If you acquired it Dirty then the last owner maybe didn't clean it, I would say give it a cleaning and see if and How it runs and go from there and if you don't see rust then don't worry about it
@ErnestB1
4 ай бұрын
IM A NEW gun owner bought CZ P07🇿🇦
@stewb520
4 ай бұрын
Good Luck , The P-07 is a Great Pistol !!
@joshuacassada8264
8 ай бұрын
Just bought a p09. Hopefully it my lgs get it in this week.
@stewb520
8 ай бұрын
Good Luck with it !
@babagermany6654
7 ай бұрын
Great guns,. Received my P07 last week and shot about 150 rounds, what I noticed it did not like the 115 gr as opposed to the 124 gr. Also the slide was a bit stiff but my guess is with more rounds shot it would loosen a bit, did anyone encounter those issues?
@stewb520
7 ай бұрын
My P-07 had no problem with 115gr or anything I put thru it, It ate every thing, Stiff slide could be from being DA/SA Hammer fired, you may be fighting the hammer when racking ,try hammer back then racking this may help
@babagermany6654
7 ай бұрын
@@stewb520 Thanks for the tip. Compared with my other DA/SA guns it is stiffer even with the hammer back. As I said my guess with more rounds shot it will get better. As for ammo, I will stick with 124 gr, I noticed with European guns they tend to like 124 gr more :)
@HighCappa45
5 ай бұрын
@@babagermany6654 it should loosen up a bit, I know mine has after putting around 500 rounds through it. Now you can press check it and rack the slide much easier but was stiff as hell out of the box.
Пікірлер: 24