Just got a threaded barrel for my Shadow 2 Kadet kit. Shoots like a dream. I had to put the full power hammer spring back in to reliably set off 22, but other than that it's great. Shoots great suppressed as well.
@Canes-kh5bq
Жыл бұрын
Had the same issue with the p07 kadet with the standard hammer spring it’s awesome go lighter and u will have issues
@evnrayash
Жыл бұрын
id like to try one of those out
@johndeere1951a
Жыл бұрын
Use only High velocity 40g premium ammo for best reliable shooting ⚠️ Excellent CZ quality 👍
@robeckel4965
2 жыл бұрын
Are you using the stock main spring in your frame? If you have a lighter spring, you may try switching back to the stock spring. I've heard that's solved the light strikes for others.
@evnrayash
2 жыл бұрын
the Kadet comes with its own spring. assume its lighter for .22
@therealgermanrockers
2 жыл бұрын
@@evnrayash that's the recoil spring you're talking about. I had the best results using the standard recoil spring that comes with the kit and using a much stiffer (above 16 lbs) main (hammer) spring. so go change your main spring to above 16 lbs and it'll have close to no light strikes (hammer falls, but no ignition) anymore. ps: that way it does even work with the SA-version, although cz asserts it won't
@NickShootsStuff
2 жыл бұрын
I've had to up the hammer spring to 20# to get reliable ignition with CCI Minimag
@robeckel4965
2 жыл бұрын
@@NickShootsStuff Good to hear you got it working with a heavier main spring. I got my Kadet conversion a few weeks ago, but haven’t shot it yet. I’ve got a few main springs to try if I it’s not reliable with my stock spring.
@robeckel4965
2 жыл бұрын
I finally took my Kadet conversion to the range today. On my completely stock CZ Shadow 2, it functioned flawlessly with the 100 rounds of 10-year-old Blazer I put through it. I did have to do some minor fitting of the Kadet slide to my Shadow 2 frame with a file, which was done before I took it to the range. I just slowly removed material from the slide until it operated without resistance. I'm very happy with it!
@GregsGruns
8 ай бұрын
Thanks for the info!
@leefra1
Жыл бұрын
CGW has an extended firing pin and weaker firing pin springs, might help?
@doogiemoster
2 жыл бұрын
hi i need to change my front sight as well, is there a specific front site for the kit or will the 9mm slide sight fit too? thanks and great vid. i use cci standard zero failures so far in 16 comps. mine is shooting high, i need to aim about 5 inches low to hit
@evnrayash
2 жыл бұрын
not sure. Dawson precision sells a sight specifically for the kadet
@bretts7037
2 жыл бұрын
I think I've solved the mystery of where all the mags for these kits are.... How much would you charge to make another one of those holsters?
@AskChristianYT
2 жыл бұрын
What trigger shoe do you have on your Shadow 2? Do you like it? I have an Orange, but I'd like to find a good flat trigger. Thanks in advance, brother. Really enjoy your videos!
@evnrayash
2 жыл бұрын
its the standard flat trigger. nothing special
@AskChristianYT
2 жыл бұрын
@@evnrayash The flat trigger from the SAO? The Orange that I have came with the curved trigger and while it works, I'd prefer a flat trigger and yours looks nice! Thanks again!
@fairplayer916
Жыл бұрын
So will this work on a P-01? If not, is it a slide issue? Or just a mag issue?
@evnrayash
Жыл бұрын
i dont think it will work
@singlo7453
11 ай бұрын
It has a plastic tip (where the front sight is attached to) at the end of the barrel that needs to be inside the longer Frame of SP01. Otherwise the tip spins around little bit along w the front sight.
@GabrielCollignon
9 ай бұрын
Where can i find a shadow 2 kadet? been looking everywhere and nothing...
@gautham6121
7 ай бұрын
Available at grabagun
@milesumbrae1969
Жыл бұрын
İs it single action?
@frankopanklaric
6 ай бұрын
Will this fit on the shadow 2 compact frame?
@av7899
2 ай бұрын
No only full sized
@frankopanklaric
2 ай бұрын
@@av7899 Thsnk you! Couldn't this answer anywhere.
@ChristanHaller
2 жыл бұрын
Cheap ammo almost never works in autos. The front sight and 10 rd capacity are legitimate concerns
@evnrayash
2 жыл бұрын
disagree. i have 100,000s of rounds of cheap bulk ammo thru 12+ 22s.
@brrrlak
Ай бұрын
No way I am buying a conversion kit.
@vettesrule11
2 жыл бұрын
Waist of money, Only 10 round mags and ammo sensitive
@venomfang8560
Жыл бұрын
Banged out 1000s of rounds with the odd expected rimfire issues. Choose the correct springs for the ammo you're using and you're golden.
@rongarritsen6793
Жыл бұрын
@@venomfang8560which ammo which spring.. please elaborate
@venomfang8560
Жыл бұрын
@@rongarritsen6793 When you buy the kit it comes with 3 different color recoil springs. Red is for higher velocity. Black is for standard velocity. Blue is for lower velocity.
@skjalglandsem7440
8 ай бұрын
Also pay attention to the main spring. I got my Shadow 2 with a trigger job, and that meant the original main spring was replaced by a lighter version. Had at least one failure to load on each mag - would have to hit the back of the slide lightly to make the round chamber completely. After I swapped back to the original main spring - not one misfire :-)
@WishonPGA
6 ай бұрын
Waste
@jaseking6560
2 ай бұрын
that thing is absolute junk .. its a failure special
Пікірлер: 41