The auction overhaul, also known as the Ritchie Bro's Rebuild!
@tf7274
9 ай бұрын
If you're going to spend $980k on a dozer...and you're going to either watch it rust or a $80k paint job... I'd bring it home with some new lipstick...
@halon7476
7 жыл бұрын
She looked bad ass with the pewter grey look.
@bestamerica
6 жыл бұрын
HALON747 She looked bad ass with the pewter grey look. ' hi H... who is a word - she -... where is she now... what her name and do have a picture of her
@БориславПарасков
6 жыл бұрын
Why you call a dozer, she ?
@atiladorsay3478
6 жыл бұрын
HALON747 guyz And u; how about metalic grey or soldier beige colour?
@shiddy.
5 жыл бұрын
Darth Vader's ride
@memphis650
5 жыл бұрын
Almost like the "KILLDOZER"
@Stoparts
5 жыл бұрын
Nice work dear colleagues 👏 Hello 👋🏻 from Istanbul
@patchbryer8205
4 жыл бұрын
In Australia we used to call this a dulux (brand of paint) rebuild. But hey that was back in the 80’s and 90s lol
@1984wcooper
7 жыл бұрын
It looks really good but still burns 5 gallons of oil per shift
@TutorialPanda
5 жыл бұрын
"we washed it off and couldn't find the leak you were talking about, she's good to go"
@tonyloechte9994
5 жыл бұрын
The Dulux rebuild , fixes em every time
@X-Machines
3 жыл бұрын
Thank you so much for giving me a chance to take down the video myself. Wishing your company ever more development and great success! Best wish for you!
@tallfarmboy
7 жыл бұрын
And now, you have a brand new looking D11 with 20,000 hours... LOL
@DumbOhioFarmboy
6 жыл бұрын
tallfarmboy barely broke in.
@J.Co89
6 жыл бұрын
Du-pont rebuild.
@epistte
5 жыл бұрын
The grousers are worn down so it likely needs a fully rebuilt undercarriage. Give it a rattle-can rebuild and send it to Ritchie Brothers.
@alco424
5 жыл бұрын
@@epistte This is at Ritchie Brothers
@epistte
5 жыл бұрын
@@alco424 Arrowhead Services is contracted by Ritchie Bros for a quickie repaint before they are resold? I didn't know that.
@tylerspellman9571
7 жыл бұрын
Massive rigs, I'm a welder for a manufacturing shop in Edmonton Alberta and have welded on many of the blades for these beasts.If there's a WBM badge on the side, pretty good chance I may have even welded on that very blade.
@ChuckBeefOG
7 жыл бұрын
Tyler Spellman I have lots of Weldco Beales attachments. Great quality attachments.
@Donkusdelux
7 жыл бұрын
Im a machinist, and i work on making various wear plates for machines, that is when we get an order of them, they are usually quard500 or hardox500 its pretty much the same thing, but man is it a bitch to work with!
@Sackmatters
7 жыл бұрын
Tyler Spellman what rod are you running and what's your hard facing pattern?
@mattysmith7802
6 жыл бұрын
U can't weld
@ChuckBeefOG
7 жыл бұрын
I bet the power washing business is huge in the oil patch. I would kill for a wash bay like yours, my shop isn't even that big lol. Keep up the good work and have a good year!
@kootybear
6 жыл бұрын
Company I worked for, sold a used freightliner Columbia, was sent up about 2 weeks later because the brake would not release. Started truck up and heard an air leak. The entire body was painted and the air tanks were completely rusted out with holes in them both.
@black07rr
5 жыл бұрын
First type of work I did coming out of the military was this exact thing for a company called Dallas equipment, some of the machines we’d get in were in horrible shape, we’d rebuild them, wash, sandblast and paint them, redo the cabs, and they’d be like new where they rolled out
@nokithecat
7 жыл бұрын
Wow they sure work hard, they work like ants.... Must have had lots of really strong coffee (O.O) Sure looks good with a bit of paint..... Thanks for sharing the video.... Nice paint shop . That D11 can bury the NDP really deep so they will never come back ! ! !
@brianwynn5081
7 жыл бұрын
Dulux rebuild
@ollysfishing4231
5 жыл бұрын
Work hard? Are you high? Didnt even get the proper treatment! Shouldve been stripped to nothing and done properly! And charge more with a fresh full ground up rebuild
@willbillingham8027
7 жыл бұрын
That's one hell of a paint booth
@pedraspreciosasdoBrasil
4 жыл бұрын
Like muito bom parabéns pelo belo trabalho gostei
@ovidiuciuparu6421
5 жыл бұрын
Painting that blade on the front... looks good. Beyond that... is just a waste of primer/ paint since that being the active part of the machine will just go away in the first hour of operation...
@feketekrisztian1897
7 жыл бұрын
Very nice finish. Great job!
@feketekrisztian1897
7 жыл бұрын
Arrowhead Services Very thanks for your answer! Amazing video! Keep it up...
@joehussey2693
7 жыл бұрын
Thats a huge job for three days, looks great
@davidjohnston330
4 жыл бұрын
The true definition of putting lipstick on a pig!! 😂🤣😂🤣
@outbackcountry512
4 жыл бұрын
Lipstick and mascara on a pig ! I've heard about these liquid overhauls , have a cousin in the oil fields in Alberta , told me how the big over worked machines get sent out for fresh paint and auctioned out for some poor sap to overpay for a worn out machine . Some companies don't think maintence is high on the scale, if it's not running it's costing money , and digging into Profits !
@thestuffz
6 жыл бұрын
that richie brothers sticker tells all
@paulipuhakka8788
11 ай бұрын
I'd hate to be looking out those windows after that blast job!!! I noticed they didn't cover the windows during the sandblast! Otherwise, not too shabby guys, looks good 👍
@justforever96
6 жыл бұрын
Wonder what's up with the one guy sitting alone on the far side from 3:16 to 3:22. Having a late lunch? Waiting for his ride to come? Starting the night shift and getting ready to clock in?
@kkbno1
7 жыл бұрын
Freshly painted bald tracks
@stevewisniewski5860
4 жыл бұрын
Today is my 49th birthday. If I had a wish, it would be that this could be done to my beautiful older truck to help it survive longer.
@stevewisniewski5860
4 жыл бұрын
Is it possible you could help me with my truck? I really need help. Something to bring my three daughters around as I go to work and try to make it there today. I’m not looking for a handout, I can pay it back just wanna know how you can help me with my transportation as I am pretty ignorant when it comes to that. I just want to help my family. I just wanna work. God bless and stay safe
@RiceWrap
4 жыл бұрын
Steve Wisniewski happy birthday
@rishanbruch6263
4 жыл бұрын
Che looks. Perfect🤘🤘
@davidhaley7053
4 жыл бұрын
Looks nice
@justforever96
6 жыл бұрын
I wonder how deeply a D11's blade would dig into a 6x6 beam just from setting it down on it like that? (Or is that an 8 x 8?) And if you pushed down on it, would it cut right through the piece of wood? A wooden beam is pretty tough, but a D11 is heavy as hell, and we're talking shear force, not compression. I think...or is it a little of both?
@AusRapArchive
Жыл бұрын
Depending on the surface but yeah it will split them, a blade with push arms and tilt cylinders usually weighs 14 tones
@geraldlrstubbs
6 жыл бұрын
Very nice five gallon overhaul. But still the same old dog it was before.
@jimsvideos7201
7 жыл бұрын
Ok yes the yellow looks sharp but the bare metal is straight up mean-looking.
@delta7743
6 жыл бұрын
bare metal??? thats grey paint......
@Alejandro-vb2fx
5 жыл бұрын
That's primer you fucking idiot 😂😂
@Chrisped11
5 жыл бұрын
@@Alejandro-vb2fx You've never sandblasted anything obviously. Thats exactly how bare metal looks afterwards.
@Alejandro-vb2fx
5 жыл бұрын
@@Chrisped11 Maybe some form of steel not used pipelining, when we sandblast the welds they're pretty damn reflective not dull like this. I've been a coating/blasting Foreman for 12 years now. I know a thing or two about sand blasting (we use black beauty media, medium for the most part haven't used sand much at all)
@Chrisped11
5 жыл бұрын
Certainly no expert on sand/media blasting, but most has come out as a darker grey matte finish. Have used anything from Aluminum Oxide to walnut. Could also be shit lighting. Makes sense it was blasting because they moved it to the paint shop then primed a lighter colour.
@PeterAlexanderWelch
7 жыл бұрын
Anyone else notice the hydraulic creep at 3.37
@jamesmartin8665
7 жыл бұрын
I noticed
@austindrevlow8662
6 жыл бұрын
Yes I saw it
@daleolson3506
6 жыл бұрын
But it has new paint
@dustydean56
6 жыл бұрын
All I noticed was a shop gremlin at 3:17 ! Spooky !
@mikesecondo2254
5 жыл бұрын
No
@maxb.4533
5 жыл бұрын
The Legend says there is no night and dark
@hwbarnes4610
5 жыл бұрын
They are merely the absence of light, which does exist.
@tracykeenan4449
6 жыл бұрын
WOW that’s so cool looks fantastic
@gherasimtibi
7 жыл бұрын
man there is just something gangster about a dozer
@mattyboy7272
7 жыл бұрын
Fill the crankcase full of grease and shes got to get up on the block till the motor blows lol
@Mocking69
7 жыл бұрын
キレイになった!!
@tf7274
9 ай бұрын
Been there many times...you can land a small plane in there...if it wasn't for the blast bay and paint shop in the middle.
@dasb00t32
5 жыл бұрын
Not to mention all that grit in everything
@proven6270
3 жыл бұрын
Was: $60k Rebuilt paint & stickers : NOW ONLY $125k 🙄😣😫😲👀🤗🤣👍😁
@lariwoo
6 жыл бұрын
Wonder what type of media they blasted with and why they did not protect the glass, even soda blasting can cause deterioration of glazed surfaces.
@HANSEBANGER77
5 жыл бұрын
Is ther no damage at hydraulic pistons and sealings after sandblasting?
@ovidiuciuparu6421
5 жыл бұрын
HANSEBANGER77 i don’t thing they touched the rod/ seals in that process.
@BassickS77
5 жыл бұрын
Should’ve painted it gray that looked good
@ArrowheadServicesLtd
5 жыл бұрын
That freshly blasted bare metal is pretty sweet!
@charleslookabill9272
7 жыл бұрын
One bad ass earth mover .
@LYEARTHMOVERS
7 жыл бұрын
Nice job!
@karlknapstein4250
6 жыл бұрын
When they come with cat walks you know they are BIG!!
@ArrowheadServicesLtd
6 жыл бұрын
You're absolutely right! We had these Cat rock trucks in the shop last week....our paint bay doors are 25 feet tall and those things were right at the top! You can't understand how big they are until you see them in person. Thanks for watching!!
@ALSomthin
4 жыл бұрын
That is one big spray booth because that dozer is big enough to have a patio with a barbeque grill , bar and hot tub on it.
@ArrowheadServicesLtd
4 жыл бұрын
Our booths are BIG! We have to fit some huge equipment up in there. We do enjoy the hot tub though... haha Thanks for watching!
@manoelsouzamendes5584
7 жыл бұрын
Muito bom !!!!!
@tandemwings4733
3 жыл бұрын
Hmmmm.... In my town, that's called a "plastic overhaul".
@willmcgregor2498
6 жыл бұрын
Was the first operation sand or soda blast? Sand blasting would etch the rams and the glass.
@ArrowheadServicesLtd
6 жыл бұрын
It is sand blasting! We use garnet as our blasting media and before we do anything on a piece of equipment, we tape off anything that could be damaged! No damage done when we sandblast :)
@aslanmane
7 жыл бұрын
It's good to have these videos so that people who "have jobs" can see what happens when those other people go to work.
@justforever96
6 жыл бұрын
Piss off.
@nigel900
6 жыл бұрын
McDonalds needs a public educated, parking lot hoser-offer at minimum wage..... Apply within.
@joshuadoll9000
7 жыл бұрын
Do you guys work exclusively on construction/mining equipment or do you do agricultural equipment too?
@friesenbrent
6 жыл бұрын
Hey guys looks Awesome I used to work here Blasting and driving every piece of Equipment and Trailers, still the Best shop to blast in Shawn looking Great Man !!!!!!
@ArrowheadServicesLtd
6 жыл бұрын
Thanks for watching, Brent!
@InTheDogHouse3DPrinting
7 жыл бұрын
I wonder if it makes that much of a difference painting these for resale value. It's like putting a $300.00 paint job on a $1000.00 car and wanting $3000.00 for it.
@hankhenry9199
6 жыл бұрын
Damn those boys are fast workers!
@ArrowheadServicesLtd
6 жыл бұрын
We wish they worked that fast ;) it would make things wayyyy more efficient!
@SergeiValerich
5 жыл бұрын
Как я понял, весь ремонт заключается в покраске, и чем лучше покраска-тем лучше ремонт.
@МихаилИванов-з3с5ю
5 жыл бұрын
Левый нож даже не поменяли
@framfull
7 жыл бұрын
Old shiny rigs often have bad news under the hood. Is the fog from sandblasting or they paint primer on the old yellow?
@TheTomar33
6 жыл бұрын
am surprise that they don't have an under coat of white primer, it would make the yellow brighter
@ArrowheadServicesLtd
6 жыл бұрын
It all depends on the job we do! Customers sometimes want direct-to-metal paint jobs without primer. Thanks for watching!
@loganp7043
5 жыл бұрын
Imagine how much paint they go through
@hommie789
6 жыл бұрын
So along with the worn out powertrain, you now have cylinder and track adjuster that were sandblasted cause people are to lazy to put down some protection? What a shame
@HuntGamingProductions
6 жыл бұрын
how u kno they have the stuff wrapped etc
@hommie789
6 жыл бұрын
How do I know they DON'T have the stuff wrapped? Have a look at the machine, after they done sandblasting you can clearly see the chrome of the cylinders sticking out. They didn't protect the glass either but but the cylinders are the expensive ones.
@ArrowheadServicesLtd
6 жыл бұрын
Hi there! We protect the machines that come through our shops by taping/putting plastic/putting tarp anywhere that could be damaged when we sandblast. Sometimes these time-lapse videos don't show 100% of our process and that can make it seem like we don't cover things. After being in business for 35+ years we do a solid job for our customers! Thanks for watching!
@ramairgto72
7 жыл бұрын
You think you would be more famous........... After all, you guys also clean Rosie O'Donnell.
@skliros9235
5 жыл бұрын
You forgot to paint the top of hood black. Honestly I would have preferred the machine before new paint.
@epistte
5 жыл бұрын
Save the money from the rattle can rebuild and fix the mechanical problems instead. New tracks, new drive sprockets and an in-frame rebuild of the motor would be a better machine. The new paint job will be trashed in 90 days.
@maxscott3349
5 жыл бұрын
I've heard about those before. They're supposed to "move big dirt"
@BarnStangz
7 жыл бұрын
Would love to know the cost to do that big of a beast? How about the cost for a mini excavator, my bota could use some fresh orange paint...
@driftking4wdrrriven937
6 жыл бұрын
BarnStangz yoou can buy kubota orange at tractor supply company, it's not expensive and is easy to put on, plus they sell the cans of it too. Kubota blue is a totally different story...
6 жыл бұрын
kubotas website sells the blue if not find a dealer theyll send it if you pay
@lewisk2418
5 жыл бұрын
It wasn't too bad before it went in, but some companies like to keep equipment looking neat and tidy. No worse advertising than you having shabby looking gear, and it keeps people employed.
@mattleitch9577
5 жыл бұрын
lewis k there painting it to sell it send it over to Ritchie brothers and auction it off
@zubutv.
5 жыл бұрын
Awesome
@ditherdather
5 жыл бұрын
I counted at least two 5 gallon buckets of yellow paint. Damn that's a lot of paint.
@ArrowheadServicesLtd
5 жыл бұрын
Yes sir you are right! Big machines = a lot of area to cover! Thanks for watching!
@MustangsTrainsMowers
7 жыл бұрын
I wonder how much the blade weighs? 10,000, 20,000 or more pounds?
@sttm1283
7 жыл бұрын
what type of paint is use for this type of vehicle? i bet it is something really durable.
@rickhctep1503
7 жыл бұрын
Just dolling and old worn out lady in new clothes so some silly bugger will buy it thinking it's a fit young lady.
@obfuscated3090
6 жыл бұрын
Give him a few beers and he won't know the difference til morning!
@tward93
7 жыл бұрын
A DuPont overhaul!
@erikhicks9379
7 жыл бұрын
T Hud I
@darylslee4965
5 жыл бұрын
Known in Australia as a liquid overhaul. Well it was forty years ago. Cheers.
@lulutileguy
3 жыл бұрын
this will clean ur driveway
@mitchvus
5 жыл бұрын
The dozer Marvin needed
@shinanokyushu2275
7 жыл бұрын
Ready for the Camel Trophy experience !
@wr6392
7 жыл бұрын
Is that paint booth from Global Finishing Solutions?
@fordnut4914
5 жыл бұрын
I don't even know why they paint the blade
@pawelbienkowski1033
6 жыл бұрын
So cool, it started yellow and ended up yellow...
@KevinWRay
5 жыл бұрын
AWESOME, NICE JOB!!!!!!!
@ArrowheadServicesLtd
5 жыл бұрын
Thanks Kevin!
@ohhpaul7364
7 жыл бұрын
how much paint does it take to paint a machine that large?
@johnobrien2207
6 жыл бұрын
How much tinners ?
@brownwarrior6867
6 жыл бұрын
John O Brien I used to work in a Tarmac Plant and the favourite order of the Travellers was always “Tree ton of Tree mill” True story
@عبدالرزاقفايقآغا
Жыл бұрын
Top
@IronWarrior95
Жыл бұрын
Really? All the new paint, but not even new tracks or new cutting blades for the blade?? It only looks good but I bet you didn't even change any filters or oil..
@Andrew-ig7wy
5 жыл бұрын
Holy balls thats a lot of painting. Wouldn't want to be the first one to scratch that thing on the job site.
@mojostevo
7 жыл бұрын
Is that Cat yellow? It looks like it was painted the same shade of Yellow as the John Deere behind it.
@justforever96
6 жыл бұрын
You probably have to pay 30% again as much for "Caterpillar Yellow", especially if it has the logo on it. It's a trademarked color, after all. I'd paint it generic yellow before I screwed around with that. Although I doubt anything with "John Deere" on it is a lot cheaper! Both make more money off of their damn brand identities than anything else. All these people convinced that somehow a Cat or Deere is somehow infinitely better than the "junk" made elsewhere. Even admitting that a Cat or Deere is often a better machine (not that I'm even admitting that) it doesn't make the other machine "junk" and it doesn't somehow turn the Cat into some flawless super machine that can run rings around others. It's like the Ford vs Chevy thing; even if a Chevy IS better than a Ford it doesn't mean it's TWICE as good. It cant' haul twice the payload, it doesn't have twice the performance, etc. Even IF a Ford had "twice the failures" of a Chevy, that doesn't translate into a huge difference in everyday driveability or profitability. Same is true with machines; people just like to choose "their" brands and bash everything else. and Cat and JD are only two of the brands notorious for this annoying behavior. But I've gotten off track.
@omegaseamaster1550
7 жыл бұрын
I wonder if they use a down draft spray booth?
@Justthatguy420
6 жыл бұрын
I can believe they drive it on the concrete without tearing it up
@ollysfishing4231
5 жыл бұрын
Would be like 300 thick to
@Joe-bv7io
5 жыл бұрын
If you look closely, there are railroad ties imbedded in the concrete carrying the load.
@Lalfy
7 жыл бұрын
3:16 peekaboo
@CarShed68
7 жыл бұрын
Why???
@chrisscholfield7269
7 жыл бұрын
How can I get job with you guys? Do you guys do fly ins 10 on 7 off.
@AZdirtdog
7 жыл бұрын
It didn't look to bad before they started
@funshooting7095
6 жыл бұрын
Great vid.
@ArrowheadServicesLtd
6 жыл бұрын
Thanks for watching!
@ArrowheadServicesLtd
6 жыл бұрын
Thanks for watching!
@jonathanmaurice1309
6 жыл бұрын
Looks like a Vermont winter at 1:40
@justforever96
6 жыл бұрын
Have you ever been to Vermont? I have lived here my whole life, and I've rarely seen it look like that, winter or summer. Why would you say "Vermont" as if winters looked any different here than elsewhere? In fact we haven't gotten shit for winter the last 3-4 years. A few moderate snow storms (that look nothing like this), a bit of snow (more this year than the last two). 25deg weather. Not real blizzards like the Northwest or parts of Canada or Alaska get. We get fog sometimes, but it's more common in the summer.
@trkr1069
7 жыл бұрын
She worked good Shells old 522 dozer
@delta7743
6 жыл бұрын
did they give her new wear plates??
@rogerclark3
6 жыл бұрын
I buy and sell diesel trucks and my #1 rule is the engine and drive train must be dirty. You can see everything in a dirty engine, good and bad. Everything else is shined to the 9's. Wash it, and I'm not buying.
@nigreos3954
7 жыл бұрын
Like in poland kinda of paint and we've got like a new
@ИванСкрябин-щ6п
5 жыл бұрын
Из серии:Не битый не крашен, пробег вообще нулевой, бабушка за кефиром только ездила 😂
@ArrowheadServicesLtd
5 жыл бұрын
Thanks for watching!
@npsit1
6 жыл бұрын
0:58 Well that escalated quickly.
@ArrowheadServicesLtd
6 жыл бұрын
Sandblasting is pretty intense! Thanks for watching!
@jamesshride3158
6 жыл бұрын
@00:58 Welp, my little 120 PSI sandblasting cabinet just started looking like a teenie tiny toy....
@ArrowheadServicesLtd
6 жыл бұрын
Thanks for watching! Some info you may find interesting about our blasting process! When we sandblast we use Garnet as our Abrasive. For blasting we use 254 CFM @100PSI with a #7 Nozzle. We actually have 3 Atlas Copco running at 161HP each and 2 large receiver tanks for air storage to feed 2-6 cube blast pots. With these compressors we can run both pots and feed the whole shop including the painters at the same time and not have a pressure drop in the system. These compressors average around 700 CFM each to do the job for what we need and then some. That is how we are able to achieve the blast pattern that we need. We use Bullard helmets with a co monitor and breathing air system.
@jamesshride3158
6 жыл бұрын
Arrowhead Services, Ltd. So will all that, I guess you can inflate large truck tires pretty quickly. :)
Пікірлер: 322