Absolutely fucking righteous bro working my 96.5 hardbody and you just made eveything make so much more sense thanks 🙏
@vmlorenzana2301
Ай бұрын
Beautiful.
@wbonilla35
6 ай бұрын
wow love the video you are so smart and well educated love the way you explain everything
@oscarmadrigal1379
8 ай бұрын
Very good information! 👍🏼
@jrock-xs9vp
3 ай бұрын
Kick ass video motor looks great thanks for the info .
@Darjan_Spasojevic
4 ай бұрын
Yeah dude my Hitachi, Nissan OEM alternator lasted 25 years! There is so much stuff that is OE on my truck.
@ciscopetros5017
3 ай бұрын
Great video and in depth info.Where did you get your adapter plate for the intake?
@philliphorne8372
9 ай бұрын
❤❤❤
@Darjan_Spasojevic
4 ай бұрын
Love my 96 but that chain slap is loud as hell when i first crank it. I know I need a timing chain kit, just dont know exactly how to do it right.
@donvito7038
8 ай бұрын
Would your fuel injection delete setup work for a 95 with a auto trans would it shift normal appreciate the videos very helpful
@Ufohunter-el6kf
8 ай бұрын
EFI to carb has no affect on an auto trans mission , the torque converter in your auto trans works just like a manual clutch in a manual transmission , so your safe! My vids are of a 95 Hardbody 2.4 ltr naturally aspirated motor that was once all EFI but!? If your intake manifold looks like mine which is the newer type of intake manifold then there is no adaptor kit for this intake manifold FYI ! I sourced out what looked like would fit and made it work no problem so you need to think outside of the box and be pretty crafty ok but then again I've been doing this over 30 years so I thought I'd mention that to ya but if your willing to do this then good luck and you will love it!!!!! Look at my Weber vids they are named Weber because I'm also helping other Weber carved people who jed help tuning etc after installed who may not have a Nissan Hardbody but my vids are all on this 95 Nissan Hardbody ok if that helps you
@craigbrandon4611
10 күн бұрын
How do you get past inspection? That’s exactly how I would like to do it😎🍻
@micknightmare3
4 ай бұрын
How did you do your lights and signals wire wise
@jamieelam8657
29 күн бұрын
Did you have to add a oil catch can for your crankcase filter on valve cover?
@micknightmare3
4 ай бұрын
I get no turn signals but head lights turn on and brake pedal turns brake lights on I get no tail lights or run signals. I'm waiting for new hazardlight switch I removed it it was busted. And I switched my signal light switch. Checked fuses inside,look good. I gust ordered 2 fusable links from nissan.
@mikeycurtis7861
2 ай бұрын
The small triangular panel, by ur left foot (when ur sitting in the driver's seat), hides the flashing unit.. it's a black box thats about the same size as ur relays. It's 3 prong on my 92 hardbody but I know some companies make 2 prong.. don't buy the wrong one! Instead of buying LEDs and putting a resistor on all the bulbs (sorta defeats the purpose of LEDs when it comes to power draw), just install LEDs, and buy an LED flashing unit. I got mine at advance auto parts for about 10 bucks. Works just fine and no more hot resistors! It's made by Novità and the part number is EP34
@chachotapia
2 ай бұрын
So for us in California a delete mods like this I’ll probably affect a smog test or what do you think
@juliusurciolo3523
6 ай бұрын
Does this apply to the 88?
@zaccsacc5839
3 ай бұрын
What you do with the injector holes?
@TheThermalLizard
6 ай бұрын
Bout to cut off those damn fusible links. Trucks been dead for over a year and that’s the only thing that makes sense at this point. 1997 hardbody
@micknightmare3
4 ай бұрын
Can I use this on my v6 87 vg30i?
@killroy3607
6 ай бұрын
Was gonna put my header on today on my 02 xterra ka 5sp but some asshole decided to pull out infront of me and totalled both our shit... frame is tweaked...
@philliphorne8372
9 ай бұрын
What year hardbody is this and do you think I could do this for a 97 ka24e I’m interested in how you did your intake and throttlebody and deleting all those wires
@Ufohunter-el6kf
9 ай бұрын
Any Hardbody from 91 or 97 an up that has a stock TBI with the factory intake manifold that looks like this 8n my videos you can do if serious enough?! There is no kit for this I made it work with modifying a Mr gasket universal carburator mounting plate as seen in my videos just watch the vids i do on this upgrade or modification and you will learn ok but be patient! I had a 5 day week to pull it off and did with a lot of planning in advance in my head before doing so ...
@philliphorne8372
9 ай бұрын
@@Ufohunter-el6kf I gotcha I appreciate it. I’m thinking about converting the throttlebody to carbureted. It’s just so many vacuum lines. It’s so ugly. Plus it’s not a daily driver it’s just for fun.
@Ufohunter-el6kf
9 ай бұрын
@@philliphorne8372 agreed ! Nothing wrong with daily driver all cleaned up either that's I showed the masses that it's an everyday ordeal for no hastles no problems but yeah man I gotcha on project on an off street type stuff can't say I haven't been there a few times myself 🤘👽
@ImSaari
9 ай бұрын
@@Ufohunter-el6kf what would the trouble be with a 1990 D21?
@Ufohunter-el6kf
9 ай бұрын
@@ImSaari is this a trick ? Man could be anything if you do not specify brutha...
Пікірлер: 37