Hey! Is it possible to reset an hdcvi camera? I mean the osd menú with no possibility to see the cam on dvr ( is not compatible)
@user-vg4yd9qb6e
8 ай бұрын
Thanks 👍👍
@DahuaUKIreland
7 ай бұрын
Welcome 👍
@morejelloplease
2 жыл бұрын
is there a way to short out certain pins to force a reset orfactory default of the camera from the ethernet jack? I keep reading on forums that when you update the firmware you need to do a complete factory default of the camera. sometimes the camera locks up and you have to climb a roof to reset a camera, this isn't practical, especially when the camera site is 40 minutes away.
@DahuaUKIreland
2 жыл бұрын
Hi. Resetting by shorting the Ethernet is not a option I’m afraid. However other options are XML resetting. This process just requires a email to our Support Department and a separate network switch unless already on one. On a side note, for sure by the book you should Factory Default after a upgrade however unless it was a big jump like from 2018 to 2021 a factory default is not always necessary.
@bassamsalam4938
Жыл бұрын
Good explanation Thank you
@DahuaUKIreland
Жыл бұрын
Thank You for Feedback.
@pedroetla
Жыл бұрын
My cam B1A21P does not have two “holes”. What can I do?
@santy3520
Жыл бұрын
thank you so much
@DahuaUKIreland
Жыл бұрын
Thank You for Feedback :-)
@kenfla82
2 жыл бұрын
Can ye do a video on using the virtual host so to log in to the cameras via the recorders network port.
@DahuaUKIreland
2 жыл бұрын
Okay. We will consider this. Thank You.
@angrycatowner
2 ай бұрын
Once you reset the camera, what is the default password?
@DahuaUKIreland
2 ай бұрын
Hi. Cameras now do not have default passwords. It's what ever you set . .
@skater96937
Ай бұрын
You can do it over the Nvr.
@GetWetDiving
2 жыл бұрын
How do I reset an analog camera stuck in CVBS mode? The OSD menu can't be accessed.
@DahuaUKIreland
2 жыл бұрын
If you use the Dahua UTC Controller this can help with this. kzitem.info/news/bejne/2qaP4IeQoWV6loY :-)
@furkanyldz8562
Жыл бұрын
Hello did you solve the problem
@GetWetDiving
Жыл бұрын
@@furkanyldz8562 Nope. UTC Controller does not work. Once your camera goes into CVBS mode chuck it in the bin.
@user-tv5yw3px2p
10 ай бұрын
My own reste is not working
@shaheerjamal1323
7 ай бұрын
how to reset dahua b1a51p camera
@pedrorodrigom.almeida8139
7 ай бұрын
How do I reset speed dome camera DH-SD50230TN?
@DahuaUKIreland
7 ай бұрын
Behind the lens is a reset button that can be held for 20 seconds to reset.
@skater96937
Ай бұрын
Firmware will reset too ?
@DahuaUKIreland
Ай бұрын
No. Factory Default does not change the firmware state.
@skater96937
Ай бұрын
@@DahuaUKIreland Okay because I have a problem with the replay on two cameras after the firmware update. No motion detection is displayed in the replay. Should I reset the cameras after the update?
@DahuaUKIreland
Ай бұрын
I suggest you speak with my team on support.uk@dahuahelp.com - If you have a analogue system they will need to know the model number. Thanks.
@fabriziobau3076
Жыл бұрын
HELLO, if I reset the camera, will the password be reset too?
@DahuaUKIreland
Жыл бұрын
Please contact support.uk@dahuatech.com
@shawnsagar10
11 ай бұрын
Yes it will
@mananij5729
Ай бұрын
This is not user friendly. I know many other brands that make the resetting of the camera easy and very user friendly. I don't understand why you should make it so difficult to access the camera and to reset it.
Пікірлер: 31